7 commits

Author	SHA1	Message	Date
sentry[bot]	06da7f815a	[Installer] End a launcher that has no window to ask instead of prompting (#7681) ... * [Installer] End a launcher that has no window to ask instead of prompting The in-app updater starts this installer detached and then closes itself. A client that accepts that close hides its window before it exits, and if it then hangs in shutdown there is nothing left to ask: the holder probe deliberately never posts WM_CLOSE to an instance it cannot see a window for, so the "ask it to close again" answer only repeated itself until the user picked Cancel and the installation aborted (Sentry COCKATRICE-DESKTOP-J). The launcher wait now asks the launcher itself before asking the user. A new probe mode, --close-launcher, answers whether that one process has a window a close could reach at all; it is limited to a pid that still runs from the directory being replaced, so a reused process id cannot be hit. When there is no window, the installer gives the shutdown it already started one full grace and then ends it through the handle it waited on, which is what the dialog's Yes answer did. The prompt remains for the case it exists for: a window is up, the instance may be waiting on its own question, and No now means only "keep waiting". The client is left alone: an already-installed version runs the installer during its own update, so a change there cannot reach the run that aborts. * [libcockatrice_rng] Include immintrin.h for AVX2 builds in SFMT --------- Co-authored-by: sentry[bot] <39604003+sentry[bot]@users.noreply.github.com>	2026-10-29 04:00:42 +01:00
sentry[bot]	bf3562a85a	[Installer] Offer to end running Cockatrice immediately when auto-close fails (#7675) ... * [Installer] Offer to end running Cockatrice immediately when auto-close fails * [Installer] Keep the way out that costs nothing in the first prompt The prompt now offers to end Cockatrice, so what the deleted close-again text said has to survive in it: an instance the probe reports as waiting for an answer to a question of its own has been brought forward, and answering that window is the way out that ends nothing. Say so, and say where to go when Yes leaves it listed - Task Manager - so an end that cannot take effect does not loop on the same dialog. * [Installer] Bring the comments back in line with the code GuardCloseTried no longer counts closes, and the file header, CloseHolders and GuardAppsNotRunning still described an escalation after a second close, as did the probe's --end-holders note. * [Installer] End Oracle and Servatrice too when the guard's end answer is confirmed The guard's end answer only ever stopped cockatrice.exe, so an Oracle holding the card database or a Servatrice service kept the payload locked and the prompt came back with nothing left that could free it. The probe now ends every program the payload installs, services included: isPayloadProgram() - the list restart_manager_holders already used for its parent walk - decides the set, so a scanner holding a DLL or a program the user keeps in the install directory is still named and left to the user. A service is terminated rather than sent a stop through the SCM, which notices the process exit and marks it stopped afterwards. The guard prompt now says what ending costs: an unsaved deck, an unwritten setting, players on a running Servatrice, and an Oracle mid-way through the card database. It also keeps the notification-area hint, which the probe's "has no window to ask" answer depends on, and drops the claim that Oracle and Servatrice had been brought forward. * [Installer] Give every running-program prompt the same end-or-retry answers Four prompts meet a running program and each offered a different set: the guard ended it, the launcher wait only kept waiting, and the recovery prompt after a failed purge could only ask Cockatrice to close. With Oracle or Servatrice holding the files, that last one had no answer that could free anything - Yes and No both retried the purge and Cancel aborted an install whose old version was already gone. All four now follow the guard's shape: one automatic attempt, then a prompt whose Yes ends the programs it names and whose No retries, with Cancel to give up. - RecoverFromHolders closes once and purges before it asks anything, then offers EndHolders - the same end answer as the guard - instead of a close the user had to trigger himself. - WaitForLauncherToExit can end the launcher by pid, the one process it holds a pid for, rather than looping 60 s waits with Cancel as the only way out. - END_COST and AFTER_CLOSING_GUIDANCE are !defines, so the cost of ending and the guidance for the answers that end nothing read the same in every prompt. * [Installer] End the launcher through the handle it was waited on The "end it" answer used to look the launcher's pid up again after a dialog that can stay open as long as the user takes, so a pid that had been reused in the meantime - or a /PID= that was never the launcher - would be terminated instead. The handle the wait already holds names that process and cannot be handed to another, so the terminate answer now acts on it. PROCESS_TERMINATE is requested along with PROCESS_SYNCHRONIZE; when only the synchronize right is granted the launcher is still waited on and the answer falls back to asking it to close, instead of reporting a live launcher as gone and writing the payload over it. * [Installer] Say what the end answer ends, and report a failed end The prompt offered "end every program listed above", but EndHolders only ends the programs the payload installs: a scanner holding a payload DLL, or a service the Restart Manager names by its long name, was listed and then silently left alone, so Yes looked like it did nothing and the same dialog came back unchanged. The wording now says which programs Yes ends and that anything else has to be closed by hand, and the round after an end that did not free the files says so, so the same dialog no longer reappears word for word. The three prompts are one macro so they cannot drift apart again. The added sentences eat into the 1024 characters one NSIS string holds, so the holder line's budget drops from 400 to 320 characters to keep the longest message (cancel line included) inside it: 977 characters, measured against the worst case the probe can produce. --------- Co-authored-by: sentry[bot] <39604003+sentry[bot]@users.noreply.github.com> Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-27 19:09:21 +01:00
sentry[bot]	30d3afc7b4	[Updater] Close a running Cockatrice when the installer asks (#7672) ... * [Updater] Refuse a close that arrives while one is already asking MainWindow::closeEvent() had a re-entrancy guard that returned without touching the event. A QCloseEvent is accepted unless something ignores it, so a second close request - an installer replacing our files posts one every 30 s - accepted the close while the first one was still blocked on its own confirmation. close() then hid this window, hid the confirmation dialog with it, and left the process running inside the nested loop that dialog had opened: no window, no way to answer it, and every later close request accepted into the same dead end. That is what an update looked like when it could not close a running client, and it is why the installer could name the process, bring it forward and ask it to close for minutes without anything happening. Track how far the shutdown has got instead. While a confirmation is up, a close from anywhere else is refused, which leaves the question in front of the user; once the shutdown has been accepted, a duplicate close (Qt delivers the event twice on some platforms) is accepted again so it cannot cancel the quit. * [Installer] Leave an instance that is asking a question alone An instance that answered a close by hiding rather than quitting - the state the client used to get into - has no visible window left, and the confirmation it is waiting on is hidden with the window that owns it. The close probe only ever looked at visible windows, so it restored the main window, posted WM_CLOSE into the same dead end, and reported "still running" without saying why. Show every window the instance left hidden before choosing the one to close, and skip the close when the window it would reach is disabled: a modal dialog of the instance's own is up, and posting the close then only hides the question again. Name what is left of the window in the report as well - gone, still open, hidden again, and whether the thread answers at all - so the log tells a refused close from one that was never delivered. * [Installer] Offer to end a Cockatrice that will not close A close is a request, and an instance that does not answer it - waiting on a question nobody is looking at, or stuck where a close cannot reach - leaves the user with no way forward: the files cannot be replaced while it runs, and clicking Yes again only repeats the request. After a second close that changed nothing, offer the only thing that can free the files: end it. The prompt says what it costs - an unsaved deck, a running game or a setting it has not written yet - the default button is the safe one, and it is a separate answer rather than a relabelled "Yes", so it is not reached by clicking through the close prompt. Only cockatrice.exe is ever ended: Oracle writes the card database in place and Servatrice is a service, so both are named and left to the user, exactly as they are for the close. The probe gains an --end-holders mode for it, and the uninstaller's guard gets the same offer. * [Installer] Never name the process that is doing the asking The old uninstaller is started with _?= so it runs in place, from the very directory it is emptying, and an installer can be downloaded into the folder it installs to. Both are then processes running from the directory, so the probe named them - and the guard asked the user to close the program that was asking. That question cannot be answered: a close and the end offer both skip anything that is not cockatrice.exe, so the guard repeated itself until the update or the uninstall was cancelled. The probe and the processes that started it are now never named, by either lookup. The walk up the parent chain stops at the first program the payload installs, because in an in-app update the installer's own parent is the Cockatrice instance being replaced - the one the guard exists to name. The Windows check held its locked file in the script that starts the probe, so that holder is excluded by design now and the check read it as "nothing found". It holds the file from a process of its own instead, and asserts the exclusion itself: a file that only the asking process holds comes back as nothing. * [Installer] Restore only the windows a user could answer Showing every hidden window an instance owns put Qt's own bookkeeping windows on screen: the tray icon keeps one to receive the TaskbarCreated message, styled WS_OVERLAPPED and titled QTrayIconMessageWindow. Restored, it is an empty white rectangle in the taskbar with no title bar to close it - it has no window procedure that would hide it again, and the process is busy in the very loop the restore is meant to break, so it stayed until the process was force-ended. Only framed, non-empty windows are restored and considered for the close now. That also keeps the close off Qt's tray window, which answers WM_CLOSE by asking the application to terminate - a quit that skips the confirmation the close is supposed to reach. * [Installer] Uninstall the previous version before installing over it A regular install over an existing one asked "a previous version must be uninstalled", then ran the old uninstaller interactively. That uninstaller put its confirmation page behind the installer window, where it could not be answered, and it only removed the installation after the installer had already written the new one over it. Run the previous version's uninstaller silently instead. The installer has already asked the question the user answered, so a second, hidden confirmation is pure risk: with /S there is no window to be behind, and ExecWait is then waiting for something that cannot outlive it. QuietUninstallString is used when the old installation has one, otherwise /S is appended. ExecWait only waits while the uninstaller runs in place: one that did not get a usable _?= copies itself to %TEMP% and returns at once, while the copy keeps deleting - which is how an uninstall can finish after the install it was supposed to precede. Log the exit code and wait for the old cockatrice.exe to disappear before restoring user data or writing anything, and abort with a message instead of installing into a directory that is still being emptied. Cancelling the "must be uninstalled" prompt now quits the installer; it used to skip the page and install over the old version anyway. * [Installer] Do not show windows the application has hidden The guard restored every hidden window an instance owned before asking it to close, so that a confirmation hidden together with its window would come back. Windows does as it is told and shows them; the application does not, because Qt still believes they are hidden and never paints them. What the user gets is a blank white rectangle, on screen and on the taskbar, that answers nothing - and the question it was meant to bring back is not answerable in it either. An instance with no window a user could answer is named and left to the user instead, and the prompt says what to do about it: open it from the notification area. Ending it stays the last resort, offered once a close has been asked for twice. The abort after a failed uninstall now says what it saw - the old version is still there after its uninstaller ran - instead of promising a removal that is not happening, which is the state a cancelled old uninstaller leaves behind. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-27 11:19:49 +01:00
sentry[bot]	d42b9607c5	[Installer] Check for running instances with the Restart Manager probe (#7671) ... * [Installer] Check for running instances with the Restart Manager probe The running-instance guard was built on powershell.exe started from the 32-bit NSIS stub, which is the 32-bit Windows PowerShell: its Get-Process cannot read the path of a 64-bit process, so a running 64-bit Cockatrice was reported as not running, the update went ahead, and the purge then failed on the DLLs that instance still had mapped. Use tools/installer-holder-probe instead - the same Restart Manager lookup the abort path already had - before anything is replaced and in the uninstaller as well. It is bitness-agnostic, so the Sysnative and WMI fallbacks are gone. The guard looks only at the payload, asks Cockatrice to close once by itself (WM_CLOSE, the same request as the window's close button) and then offers close again / retry after closing by hand / cancel for whatever the close cannot reach - Oracle writes the card database in place, Servatrice has no window - without force-stopping anything. A failed purge offers the same close-and-retry, tries one last purge when nobody is named, and every dialog shows in every mode: a silent reinstall stays silent until something goes wrong. * [Installer] Name processes running from the install directory The running-instance guard answers from the Restart Manager, which reports who has a file open. A running instance does not have to have one open: its own image and the modules it loaded are mapped into it rather than opened by it, and a mapping is not reliably reported. That is the state the probe was added for - every DLL still on disk, an instance running from the directory, and "nothing is holding them any more" as the answer. A guard built on file handles alone is blind to exactly that instance, so it passes, the purge fails, the holder lookup after it names nobody either, and the install ends in a warning that no running program was found: no close is attempted and no retry is offered. A manual install with another instance open never asks it to close at all. Name every process whose image lives in the directory being replaced as well, with the same bitness-safe QueryFullProcessImageNameW the probe already uses to label its holders. The image lookup is listed first - it is the instance the user is asked to close - and the Restart Manager entries follow with the pids already named dropped, so the close still reaches everything that holds a file. A Restart Manager call that fails only makes the probe unable to answer when the image lookup named nobody either. Ask instead of dead-ending when the probe cannot answer at all: Retry checks again, Ignore carries on, Abort cancels, in the installer and the uninstaller alike, and the abort dialog says the check failed instead of claiming no running program was found. The Windows CI probe check covers the new lookup with a process started from the directory that holds no file open. * [Installer] Offer to wait again when the launcher has not exited A client that is still closing after 60 s is usually not hung: it is showing its own "quit anyway?" confirmation for an unsaved deck, an open game or a card database update, and the user is the one who has to answer it. The installer answered that with a plain warning and stopped, so the only way forward was to close Cockatrice by hand and run the update again - which on an in-app update means finding the downloaded installer. Ask instead: Retry brings the client to the front, asks it to close again (WM_CLOSE, nothing forced) and keeps waiting on its handle, Cancel stops as before. There is no "install anyway" answer because a live process has its image and Qt DLLs mapped, so writing the payload over them is the broken install this wait exists to prevent - and the guard that runs right after names the same process by its image path and stops there, so ignoring would only move the same question a moment later. * [Installer] Ask about a launcher that has not exited after ten seconds A minute of silence is a long time to sit in front of an installer that has no window yet, and the case it is waiting for is not a slow flush: a client that started an update exits in well under a second, so a minute means it is almost always showing its own "quit anyway?" confirmation with nobody looking at it. Wait ten seconds for the first question instead, and the full grace for the ones after it. The normal path is untouched - WaitForSingleObject returns as soon as the handle signals, so a client that exits in 200 ms still costs 200 ms - and answering the first question once does not turn into a stream of prompts while the user is in Cockatrice's window. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-26 19:25:10 +01:00
sentry[bot]	4793c1fc04	[Installer] Offer to close blocking processes and retry purge on upgrade (#7664) ... * [Installer] Offer to close blocking processes and retry purge on upgrade * [Installer] Retry the purge after closing only our own applications The first version of this fix closed every Restart Manager holder through RmShutdown, forcing what refused to close. RmShutdown also stops services, and the only API that brings them back is RmRestart, which would restart Cockatrice itself into the files that are about to be replaced; the forced pass also contradicts the running-instance guard, which never force-closes Cockatrice because it may be holding an unsaved deck. The guard ran first anyway, so for the case the fix exists for - a Cockatrice restarted during the update - the probe never got to run: the guard waited 60 s and aborted. Keep the prompt and the retry, but ask only Cockatrice, Oracle and Servatrice to close, with WM_CLOSE and nothing else, and leave every other holder named by the probe to the user. Repeat the prompt while the user keeps saying Yes, refresh the names after a failed retry, and keep the /R abort message pointing at the downloaded installer. Also clear the read-only attribute before every purge attempt. Delete and RMDir leave such a file in place, so the retry could never make progress, and the diagnostics branch that named the cause had no action behind it. The holder probe goes back to being diagnostic-only, so its Restart Manager code and the --close argument are dropped. * [Installer] Make an accepted close of the running client actually land WM_CLOSE is a request, and Cockatrice answers it: while a card database update is running, a game is open or a deck is unsaved it puts up its own "are you sure?" confirmation. That dialog opened behind the installer's prompt, so the user saw nothing happen; the next Yes was posted to a main window the app's own modal dialog had disabled, so it was ignored as well, and the identical yes/no prompt came back with no hint of why. - Activate the matching window before posting WM_CLOSE, so the app's own confirmation is in front where it can be answered. - Wait up to 30 s for cockatrice.exe to exit instead of purging after a fixed 2 s, so the purge measures the app gone rather than its dialog. - On the second and later rounds ask with Retry/Cancel and say what is needed, instead of repeating the same offer that just did nothing. - Stop promising Oracle and Servatrice: they are console applications, so CloseMainWindow() has nothing to send WM_CLOSE to. They are not force-stopped either - Oracle writes the card database in place. * [Installer] Close the client from the holder probe, not PowerShell Accepting the offer to close did nothing on a real machine: the instance stayed up, never came forward, and the same prompt came back. The prompt names its holders from the Restart Manager probe, but the close itself went through powershell.exe: Get-Process -Name, a strict "path starts with $INSTDIR" filter, then Process.CloseMainWindow() and a WScript.Shell AppActivate. Every step of that is silent. A process whose path cannot be read is filtered out, a process .NET finds no main window for makes CloseMainWindow() return false without posting anything, and AppActivate is refused for a background caller - so an attempted close, a missed close and a close request the client ignored all looked the same in the log: nothing. Ask the probe instead. installer-holder-probe --close-holders closes exactly the processes Restart Manager just named as holding a file of the version being replaced, so no executable path has to be guessed and a third party application that merely shares the image name is never in the set. Per instance it restores and brings the top-level window forward (AttachThreadInput, so the client's own "really quit?" confirmation is on screen rather than behind the installer), posts WM_CLOSE to the main window, and waits up to 30 s for the process to exit. Its report names every holder with what happened to it, including the ones left to the user, and goes into the installer log as one line. That also removes the separate PowerShell polling loop that used to wait for the close: the probe holds a handle on the process it asked, so the purge that follows measures a settled directory. Oracle and Servatrice are still never closed, and nothing is force-stopped. --------- Co-authored-by: sentry[bot] <39604003+sentry[bot]@users.noreply.github.com> Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-26 09:45:52 +01:00
BruebachL	bbc6003f0a	[CrashReporting] Name the files and processes behind a failed installer purge (#7590) ... * [CrashReporting] Log which files and processes blocked the installer purge A purge that fails aborts the upgrade with a message that can only guess at the cause, and the log only listed which DLLs survived. Record what Windows reports for each survivor and which processes still have the install directory mapped, then repeat the holder list in the abort message. The diagnostics are additive and run only on the abort path: they open each survivor for DELETE access and close it again without deleting, so a failed upgrade can never end up half-removed. The purge itself is unchanged. * [CrashReporting] Name the holders of a failed purge with Restart Manager The process-and-module scan could only name a holder whose image lives in the install directory or that loaded one of its DLLs, so the case this diagnostic exists for - an antivirus scanner holding a plain handle - was reported as "no holder named, only a code". Reaching the Restart Manager from the NSIS script would have meant marshalling RM_PROCESS_INFO through System::Call as a table of hand-computed offsets, which cannot be checked without a Windows toolchain, and that is why it was dropped when this diagnostics was written. Move the call into tools/installer-holder-probe: a small executable the same Windows build compiles, linking nothing from this project so it still starts when the installed runtime is what the purge could not replace. It rides inside the installer and is extracted to $PLUGINSDIR only when the purge has already failed, so the successful path is unchanged and nothing new is installed. .ci/compile.sh runs it against a file held with FileShare.None on the Windows runners, so the lookup is exercised on real Windows instead of only compiled. * [CrashReporting] Fix the holder probe check and cap the holder line The probe block ran after the package steps, where the working directory is already the build dir, so its $BUILD_DIR-prefixed paths named build/build and the PowerShell file could not be written. Move it ahead of install/package, where the build dir is still the cwd, and name both files relative to it. Guard it on MAKE_NO_CLIENT, since the probe is only built with the client. Cap the rendered holder line at HOLDER_LINE_CHAR_MAX: the count limit alone does not keep long service names inside the NSIS string that also carries the abort text and the log path. Whole entries are kept and the rest counted, with the first holder always shown. Also run cmake-format on the probe's CMakeLists so the lint job accepts it. * [CrashReporting] Report a read-only purge survivor and bound the probe check --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 00:46:54 +02:00
BruebachL	870ab23608	[Tooling] Add IWYU Qt6 mapping, generator, and runner script (#7454) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-08 11:17:01 +02:00