* [Tests] Register each test case with CTest instead of each test binary
Registering a test cost four edits across a dozen CMakeLists files: add_test,
add_executable, a conditional add_dependencies on gtest, and target_link_libraries.
The conditional branch was the trap -- it is only needed when GTest was fetched and
add_subdirectory'd, and omitting it yields undefined gtest symbols at link time --
so it was easy to leave out and impossible to notice until the link failed.
Fold all four steps into cockatrice_add_test() and migrate every test directory
onto it, with a cockatrice_add_manual_test() wrapper for the three benchmarks that
are built but deliberately kept out of ctest. The calls now read as a declaration
of what a test is rather than a transcript of how to register one.
While rewriting the registrations, replace add_test(NAME x COMMAND x) with
gtest_discover_tests(). Naming the binary as a single CTest entry meant a CI failure
reported only which binary failed, and ctest -R Suite.Case could not select an
individual case. Discovery raises the suite from 35 opaque entries to 469 real ones:
ctest -R ThemeMigrationTest.IsIdempotent now runs exactly that case, and
ctest -L server / -LE bench work off labels applied at registration.
Give every test a 60s TIMEOUT. CTest's implicit default is 1500s, so one hung
socket wait would stall CI for 25 minutes, and single_instance_manager_test already
does real QLocalSocket waits.
Dropping per-case granularity costs wall-clock time, since the suite becomes
process-spawn bound rather than CPU bound: serial ctest went from 3.8s to 30.8s. Run
it with -j in CI to recover it -- 7.6s at -j4, and 3.5s at -j8, both at or below
the old serial time. The binaries are parallel-safe: the only test claiming a fixed
resource scopes its local socket name to its own pid, so concurrent copies cannot
collide.
Also delete dummy_test, which asserted 1 == 1 and only proved the harness was
wired up -- something the other 468 cases already establish.
No test is added, removed, or changed by this commit; the 469 cases are the same
ones the 35 binaries contained.
* [Tests] Make QtTest available to test targets
QtTest was not among the modules test targets could link, so the Qt model and
signal contracts had no way to be verified from a test: QAbstractItemModelTester
and QSignalSpy both live there.
Add Test to _TEST_NEEDED in cmake/FindQtRuntime.cmake. That is the single place the
union of test-only Qt modules is declared, so this is the only file that needs to
change to make the module reachable from every test target.
Nothing uses it yet. This lands the capability ahead of the model-layer tests that
need it, so those can be added as tests alone rather than as test plus build-system
plumbing.
* [Tests] Correct the note on the oracle test compression defines
add_definitions() populates the directory's COMPILE_DEFINITIONS property, which is
consumed at generate time, so it reaches every target in the directory no matter
where it is called relative to add_executable(). The previous note claimed the
flags stayed confined to the benchmark because the find_package block came after
it; oracle_importer_test, created above that block, carries both defines too.
Verified harmless rather than a live bug: HAS_ZLIB and HAS_LZMA gate code only in
oracle/src/pages.cpp and oracle/src/pagetemplates.cpp, and no test target compiles
either. The ordering and the leaked defines are both pre-existing, so this only
corrects the explanation.
* [Tests] Carry one CTest label per test instead of several
gtest_discover_tests() can hand CTest exactly one label. GoogleTestAddTests.cmake
accumulates its generated script with `foreach(arg ${ARGN})`, so a label list reaches
the CTestTestfile as bare `LABELS ci server`, and CTest reads only the first value of a
property and drops the rest without a word.
The `ci` label that is appended to every registered test was therefore absent from every
test that also asked for `server` or `bench`: `ctest -L ci` reported 400 of 469 cases,
and `ctest --print-labels` never listed a second label anywhere in the build.
Reduce each test to exactly one of `ci`, `server`, or `bench`, which is all the
selections need. The three now partition the suite exactly, 400 + 64 + 5 = 469, and
`ctest -LE bench` still means everything but benchmarks. A second label is now a
configure-time FATAL_ERROR rather than a line that quietly means something else.
Anything orthogonal to a test's kind belongs in a helper flag beside the label, so it
composes with the group instead of competing for the single slot.
Also raise DISCOVERY_TIMEOUT off GoogleTestAddTests' 5s default. A plain debug binary
answers --gtest_list_tests in 0.04s, but that budget is thin once several binaries
discover concurrently behind a -j build, and being over it fails at the *link* step with
a bare "Process terminated due to timeout" that points nowhere near the cause.
* [Tests] Link gtest_main on the fetched-gtest path
The downloaded-gtest branch set GTEST_BOTH_LIBRARIES to `gtest` alone, while
FindGTest sets it to both halves. Every test target links that list rather than
picking an entry point, so on this path nothing provides main() and any test
source that does not define its own fails at link with `undefined reference to
main` pointing at crt1.o, naming neither gtest nor the line responsible.
That stayed latent while every test carried its own four-line main(). A test that
omits it now fails, and the error points at the C runtime rather than at gtest,
which is a long way from the cause. Restoring both halves makes the two paths
agree and drops the boilerplate requirement on new test sources.
The 18 sources that still define main() keep linking: gtest_main.cc defines
nothing but main, so the linker leaves its object in the archive unused rather
than reporting a duplicate.
* [Build] Add an ENABLE_SANITIZERS option for ASan and UBSan
Adds -DENABLE_SANITIZERS, off by default, building with AddressSanitizer and
UndefinedBehaviorSanitizer. The bulk of the work is in the three ways the obvious
implementation silently does the wrong thing.
Probe the flags on the link step, not just the compile step. check_cxx_compiler_flag()
only compiles, so every sanitizer flag comes back unsupported, because linking an ASan
object without -fsanitize=address leaves __asan_init undefined. The result is not a
build failure but a build that appears instrumented and is not, which is worse. Use
check_cxx_source_compiles() with CMAKE_REQUIRED_LINK_OPTIONS instead, and treat an
unsupported sanitizer pair as fatal since the cosmetic flags are allowed to degrade.
Opt vendored sources out per source, through a cockatrice_disable_sanitizers_for()
helper rather than a list of set_source_files_properties() calls at the root. The
helper has to exist because CMake resolves a source-file property against the directory
scope its target was declared in: setting the property from the root with absolute paths
is a no-op, silently, which is why the call sites sit next to the add_library and
add_executable that pull the vendored code in. SFMT, minizip, the LZMA SDK and Qxt SMTP
are excluded. oracle/src/qt-json is in the history but not in the tree, removed in
#7214.
Also mark those sources SKIP_PRECOMPILE_HEADERS. The PCH is built with the sanitizer
flags, so it defines __SANITIZE_ADDRESS__; a translation unit compiled with
-fno-sanitize=all does not and GCC then refuses the PCH, which is a fatal
-Werror=invalid-pch in the servatrice and oracle builds.
-fno-sanitize=vptr is not optional. Qt constructs QObject subclasses into raw storage
and writes the vptr afterwards, so the vptr check reports on essentially every QObject
instantiation, and it has no value here because nothing outside moc-generated code
inherits QObject.
Verified on the resulting build: our own translation units carry ASan and UBSan calls,
SFMT.o carries neither, and the full suite of 464 cases passes clean under
ASAN_OPTIONS=detect_leaks=0:abort_on_error=1 with UBSAN_OPTIONS=halt_on_error=0.
The test suite needs two adjustments to make this option usable at all, both of which
land here because they are consequences of COCKATRICE_SANITIZERS existing rather than
independent changes.
DISCOVERY_TIMEOUT rises from 60s to 300s under sanitizers. An instrumented binary takes
2.8s to answer --gtest_list_tests against 0.04s uninstrumented, and discovery runs
several binaries at once behind a -j build.
One target is excluded via a NO_SANITIZE flag, server_developer_role_test. Reaching
google::protobuf::TextFormat::Printer's destructor aborts on an absl assertion inside
system protobuf 33.4 whenever the consumer translation unit is built without NDEBUG,
which a Debug sanitizer build is. This reproduces with no Cockatrice code at all, just
"TextFormat::Printer p; p.PrintToString(msg, &out);" built with -fsanitize=address, so it
is upstream rather than ours. It is a flag and not a fourth label because "skip this in
the sanitizer leg" has to compose with a test's group rather than compete for the single
label slot, and because a flag excludes by not registering the cases at all, which
cannot rot the way a label silently can. The target still builds and still runs on the
legs without sanitizers.
* [CI] Run the suite once under ASan and UBSan
Adds --sanitize to .ci/compile.sh, mirroring --test, and turns it on for one entry of
the existing Linux Docker matrix: Ubuntu 26.04, which already had a test-enabled leg.
That reuses the image, the ccache layer and the existing step shape, so the CI diff is a
matrix key plus the argument plumbing. Debian 13 and Fedora 44 keep covering the
uninstrumented suite, so nothing is lost by instrumenting one leg.
Sanitizers stay off the release and package legs, which build with --release for
packaging: instrumenting those would change the shipped binaries' optimization profile
and build time for no benefit. macOS and Windows stay uninstrumented too, since ASan is
unreliable against the Qt build there and MSVC has no equivalent without /fsanitize=address.
--sanitize does not imply --test, so an instrumented build can be produced locally
without paying for ctest. When both are given, ctest runs with detect_leaks=0 because Qt
and the sanitizer runtimes both leak at exit by design and LeakSanitizer's default buries
real findings under hundreds of process-teardown reports, and with UBSan halt_on_error=0 so
one run collects many findings instead of stopping at the first. ASan keeps
abort_on_error=1, since a bad access leaves the process unusable and continuing only
produces a second, more confusing report from the wreckage.
* [CI] Publish a gcovr line-coverage report from the test run
Sanitizers tell us what a run did wrong; they say nothing about what it never
reached. This adds the other half: an instrumented build whose report says which
of our own lines no test executes.
Add an ENABLE_COVERAGE option that compiles with --coverage -O0 -g, mirroring the
ENABLE_SANITIZERS opt-in including the per-source carve-out that keeps vendored
trees out of the denominator. -O0 is deliberate: at higher optimisation levels GCC
merges and relocates lines, so the report would describe code that no longer exists
in that form. Only GCC is supported, since Clang's intermediate format needs
llvm-cov; asking for coverage under Clang is a hard error rather than a build that
silently produces unreadable .gcno files.
Keep the filters in a committed gcovr.cfg rather than in the invocation. The tests
themselves are excluded because they are compiled with the same instrumentation
and are only ever executed by the run doing the measuring, so leaving them in would
report a healthier project than we have. The process entry points and the client's
window chrome go too: each needs a display, an interactive terminal or a live
database before it does anything a headless test could observe, so they would
otherwise sit at 0% forever and bury real movement.
Give coverage its own matrix leg rather than a second flag on the sanitizer leg.
The two answer different questions, and combining them slows both down without
telling us more. The new variant key gives the leg its own Docker image and ccache
entry so the two legs cannot race on the same tag.
The leg publishes an HTML report with per-file pages, LCOV, Cobertura XML and a
JSON summary. gcovr is a report-time dependency rather than a build dependency, so
a missing one warns and skips instead of failing an otherwise green build.
* [CI] Resolve the coverage source root before the build dir cd
The previous commit computed SRC_ROOT after `cd "$BUILD_DIR"`, under a comment
claiming it ran before. `$0` is relative to the directory the script was invoked
from, so from inside the build dir `dirname "$0"` no longer resolves and the
subshell's `cd` fails. Under `set -e` that is fatal rather than an empty variable,
which took down every leg in the matrix, coverage or not, including the ones this
change does not otherwise touch.
Move it above the cd and guard it on MAKE_COVERAGE, since the coverage report is
the only consumer. Resolving it unconditionally meant a coverage-only detail was
paid for by every build in the fleet, and gave every one of them a way to fail.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Tests] Register each test case with CTest instead of each test binary
Registering a test cost four edits across a dozen CMakeLists files: add_test,
add_executable, a conditional add_dependencies on gtest, and target_link_libraries.
The conditional branch was the trap -- it is only needed when GTest was fetched and
add_subdirectory'd, and omitting it yields undefined gtest symbols at link time --
so it was easy to leave out and impossible to notice until the link failed.
Fold all four steps into cockatrice_add_test() and migrate every test directory
onto it, with a cockatrice_add_manual_test() wrapper for the three benchmarks that
are built but deliberately kept out of ctest. The calls now read as a declaration
of what a test is rather than a transcript of how to register one.
While rewriting the registrations, replace add_test(NAME x COMMAND x) with
gtest_discover_tests(). Naming the binary as a single CTest entry meant a CI failure
reported only which binary failed, and ctest -R Suite.Case could not select an
individual case. Discovery raises the suite from 35 opaque entries to 469 real ones:
ctest -R ThemeMigrationTest.IsIdempotent now runs exactly that case, and
ctest -L server / -LE bench work off labels applied at registration.
Give every test a 60s TIMEOUT. CTest's implicit default is 1500s, so one hung
socket wait would stall CI for 25 minutes, and single_instance_manager_test already
does real QLocalSocket waits.
Dropping per-case granularity costs wall-clock time, since the suite becomes
process-spawn bound rather than CPU bound: serial ctest went from 3.8s to 30.8s. Run
it with -j in CI to recover it -- 7.6s at -j4, and 3.5s at -j8, both at or below
the old serial time. The binaries are parallel-safe: the only test claiming a fixed
resource scopes its local socket name to its own pid, so concurrent copies cannot
collide.
Also delete dummy_test, which asserted 1 == 1 and only proved the harness was
wired up -- something the other 468 cases already establish.
No test is added, removed, or changed by this commit; the 469 cases are the same
ones the 35 binaries contained.
* [Tests] Make QtTest available to test targets
QtTest was not among the modules test targets could link, so the Qt model and
signal contracts had no way to be verified from a test: QAbstractItemModelTester
and QSignalSpy both live there.
Add Test to _TEST_NEEDED in cmake/FindQtRuntime.cmake. That is the single place the
union of test-only Qt modules is declared, so this is the only file that needs to
change to make the module reachable from every test target.
Nothing uses it yet. This lands the capability ahead of the model-layer tests that
need it, so those can be added as tests alone rather than as test plus build-system
plumbing.
* [Tests] Correct the note on the oracle test compression defines
add_definitions() populates the directory's COMPILE_DEFINITIONS property, which is
consumed at generate time, so it reaches every target in the directory no matter
where it is called relative to add_executable(). The previous note claimed the
flags stayed confined to the benchmark because the find_package block came after
it; oracle_importer_test, created above that block, carries both defines too.
Verified harmless rather than a live bug: HAS_ZLIB and HAS_LZMA gate code only in
oracle/src/pages.cpp and oracle/src/pagetemplates.cpp, and no test target compiles
either. The ordering and the leaked defines are both pre-existing, so this only
corrects the explanation.
* [Tests] Carry one CTest label per test instead of several
gtest_discover_tests() can hand CTest exactly one label. GoogleTestAddTests.cmake
accumulates its generated script with `foreach(arg ${ARGN})`, so a label list reaches
the CTestTestfile as bare `LABELS ci server`, and CTest reads only the first value of a
property and drops the rest without a word.
The `ci` label that is appended to every registered test was therefore absent from every
test that also asked for `server` or `bench`: `ctest -L ci` reported 400 of 469 cases,
and `ctest --print-labels` never listed a second label anywhere in the build.
Reduce each test to exactly one of `ci`, `server`, or `bench`, which is all the
selections need. The three now partition the suite exactly, 400 + 64 + 5 = 469, and
`ctest -LE bench` still means everything but benchmarks. A second label is now a
configure-time FATAL_ERROR rather than a line that quietly means something else.
Anything orthogonal to a test's kind belongs in a helper flag beside the label, so it
composes with the group instead of competing for the single slot.
Also raise DISCOVERY_TIMEOUT off GoogleTestAddTests' 5s default. A plain debug binary
answers --gtest_list_tests in 0.04s, but that budget is thin once several binaries
discover concurrently behind a -j build, and being over it fails at the *link* step with
a bare "Process terminated due to timeout" that points nowhere near the cause.
* [Tests] Link gtest_main on the fetched-gtest path
The downloaded-gtest branch set GTEST_BOTH_LIBRARIES to `gtest` alone, while
FindGTest sets it to both halves. Every test target links that list rather than
picking an entry point, so on this path nothing provides main() and any test
source that does not define its own fails at link with `undefined reference to
main` pointing at crt1.o, naming neither gtest nor the line responsible.
That stayed latent while every test carried its own four-line main(). A test that
omits it now fails, and the error points at the C runtime rather than at gtest,
which is a long way from the cause. Restoring both halves makes the two paths
agree and drops the boilerplate requirement on new test sources.
The 18 sources that still define main() keep linking: gtest_main.cc defines
nothing but main, so the linker leaves its object in the archive unused rather
than reporting a duplicate.
* [Build] Run the test suite under ASan and UBSan (#7400)
* [Build] Add an ENABLE_SANITIZERS option for ASan and UBSan
Adds -DENABLE_SANITIZERS, off by default, building with AddressSanitizer and
UndefinedBehaviorSanitizer. The bulk of the work is in the three ways the obvious
implementation silently does the wrong thing.
Probe the flags on the link step, not just the compile step. check_cxx_compiler_flag()
only compiles, so every sanitizer flag comes back unsupported, because linking an ASan
object without -fsanitize=address leaves __asan_init undefined. The result is not a
build failure but a build that appears instrumented and is not, which is worse. Use
check_cxx_source_compiles() with CMAKE_REQUIRED_LINK_OPTIONS instead, and treat an
unsupported sanitizer pair as fatal since the cosmetic flags are allowed to degrade.
Opt vendored sources out per source, through a cockatrice_disable_sanitizers_for()
helper rather than a list of set_source_files_properties() calls at the root. The
helper has to exist because CMake resolves a source-file property against the directory
scope its target was declared in: setting the property from the root with absolute paths
is a no-op, silently, which is why the call sites sit next to the add_library and
add_executable that pull the vendored code in. SFMT, minizip, the LZMA SDK and Qxt SMTP
are excluded. oracle/src/qt-json is in the history but not in the tree, removed in
#7214.
Also mark those sources SKIP_PRECOMPILE_HEADERS. The PCH is built with the sanitizer
flags, so it defines __SANITIZE_ADDRESS__; a translation unit compiled with
-fno-sanitize=all does not and GCC then refuses the PCH, which is a fatal
-Werror=invalid-pch in the servatrice and oracle builds.
-fno-sanitize=vptr is not optional. Qt constructs QObject subclasses into raw storage
and writes the vptr afterwards, so the vptr check reports on essentially every QObject
instantiation, and it has no value here because nothing outside moc-generated code
inherits QObject.
Verified on the resulting build: our own translation units carry ASan and UBSan calls,
SFMT.o carries neither, and the full suite of 464 cases passes clean under
ASAN_OPTIONS=detect_leaks=0:abort_on_error=1 with UBSAN_OPTIONS=halt_on_error=0.
The test suite needs two adjustments to make this option usable at all, both of which
land here because they are consequences of COCKATRICE_SANITIZERS existing rather than
independent changes.
DISCOVERY_TIMEOUT rises from 60s to 300s under sanitizers. An instrumented binary takes
2.8s to answer --gtest_list_tests against 0.04s uninstrumented, and discovery runs
several binaries at once behind a -j build.
One target is excluded via a NO_SANITIZE flag, server_developer_role_test. Reaching
google::protobuf::TextFormat::Printer's destructor aborts on an absl assertion inside
system protobuf 33.4 whenever the consumer translation unit is built without NDEBUG,
which a Debug sanitizer build is. This reproduces with no Cockatrice code at all, just
"TextFormat::Printer p; p.PrintToString(msg, &out);" built with -fsanitize=address, so it
is upstream rather than ours. It is a flag and not a fourth label because "skip this in
the sanitizer leg" has to compose with a test's group rather than compete for the single
label slot, and because a flag excludes by not registering the cases at all, which
cannot rot the way a label silently can. The target still builds and still runs on the
legs without sanitizers.
* [CI] Run the suite once under ASan and UBSan
Adds --sanitize to .ci/compile.sh, mirroring --test, and turns it on for one entry of
the existing Linux Docker matrix: Ubuntu 26.04, which already had a test-enabled leg.
That reuses the image, the ccache layer and the existing step shape, so the CI diff is a
matrix key plus the argument plumbing. Debian 13 and Fedora 44 keep covering the
uninstrumented suite, so nothing is lost by instrumenting one leg.
Sanitizers stay off the release and package legs, which build with --release for
packaging: instrumenting those would change the shipped binaries' optimization profile
and build time for no benefit. macOS and Windows stay uninstrumented too, since ASan is
unreliable against the Qt build there and MSVC has no equivalent without /fsanitize=address.
--sanitize does not imply --test, so an instrumented build can be produced locally
without paying for ctest. When both are given, ctest runs with detect_leaks=0 because Qt
and the sanitizer runtimes both leak at exit by design and LeakSanitizer's default buries
real findings under hundreds of process-teardown reports, and with UBSan halt_on_error=0 so
one run collects many findings instead of stopping at the first. ASan keeps
abort_on_error=1, since a bad access leaves the process unusable and continuing only
produces a second, more confusing report from the wreckage.
* [Build] Fix sanitizer flag leak into release package and make UBSan fail CI
- compile.sh always passes -DENABLE_SANITIZERS explicitly so the
release-package reconfigure in the same build dir cannot inherit ON
from the sanitized debug step (which shipped libasan/libubsan DEB deps).
- Sanitizers.cmake resets COCKATRICE_SANITIZERS to OFF when the option is
off (CACHE INTERNAL otherwise sticks forever, keeping NO_SANITIZE skips
and the 300s discovery timeout).
- UBSan now fails the job: -fno-sanitize-recover=undefined at compile time
plus UBSAN_OPTIONS halt_on_error=1 (recover mode exits 0, so the old
halt_on_error=0 could never fail).
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Client] Improve card database update visibility
Addresses Cockatrice/Cockatrice#7431.
Cockatrice previously offered no in-client feedback while the card
database updater ran: the only progress UI lived in the first-run
wizard, stderr/stdout were not parsed in interactive runs, and starting
a second update with Oracle already open or with a hidden background run
active just showed a confusing 'already running' guard - even though
Oracle is launched as a separate process with no lifecycle tracking.
- Add a status-bar widget (CardDatabaseUpdateStatusBar) that appears
while an update runs and shows the Downloading/Parsing/Importing
stages with percent progress; it is also used in the quit-confirm
prompt so users see an unfinished update before cancelling it.
- Parse the updater's PROGRESS lines (new CardUpdateProgressParser,
unit-tested) in both foreground and background runs and log stage
changes to the new card_database.update category, throttled to at
most one line per second; forward Oracle stderr to the logs.
- Show a tray balloon when a background update starts and on finish or
failure instead of staying silent.
- Request a running Oracle instance to raise itself (QLocalServer
CockatriceOracleRaise-<user>) when the user starts another update, and
demote the 'already running' guard to an informative message only when
no running instance can be found.
- Emit download/scan/import progress unconditionally from Oracle so
interactive and background runs behave the same.
- Document the new log category in the troubleshooting guide.
* [Client] Address card database update review feedback
* [Client] Add setting to control card database update tray notifications
* [Client] Address remaining card database update review nits
- Rename card_update_progress_parser.{h,cpp} to card_update_progress.{h,cpp}
- Store the CardUpdateProgress struct in the status bar widget
* Lint.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [CardDB] Drop rebalanced-card filtering from the v4 parser
Rebalanced cards no longer exist, so the includeRebalancedCards
preference has no data to filter. Always keep printings marked
isRebalanced and remove the now-unused ICardPreferenceProvider
plumbing from CockatriceXml4Parser and CardDatabaseLoader.
The setting itself (CardsDisplaySettings, Manage Sets checkbox,
Oracle attribute mapping) is removed in a follow-up.
* [CardDB] Drop the rebalanced-cards setting entirely
Rebalanced Alchemy cards no longer exist, so remove the
includeRebalancedCards preference surface: the CardsDisplaySettings
getter/setter/signal, the ICardPreferenceProvider and
ICardsDisplaySettingsProvider methods, the Manage Sets checkbox, the
legacy settings migration mapping, the isRebalanced attribute mapping
in the Oracle importer, and the isRebalanced attribute in the v4
schema.
Builds on #7448, which already stopped the v4 parser from filtering
on the preference.
* [CardDB] Drop the unused isOnlineOnly printing property
The Arena-card detection switched from isOnlineOnly to isRebalanced in
#5778, so nothing has read this printing property since; it only
round-trips from the Oracle importer into cards.xml. Remove the
importer mapping, the benchmark fixture field and the v4 schema
attribute so regenerated databases stop carrying it.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [DeckList] Apply include-what-you-use to libcockatrice_deck_list
* [IWYU] Apply include-what-you-use across the tree
Run one whole-tree IWYU pass over the libcockatrice_* libraries, the
Cockatrice client, Oracle, Servatrice and the test suite, so each
translation unit includes what it uses directly and forward-declares
what it does not need.
IWYU only analyses real translation units, never the moc code CMake
generates from Q_OBJECT headers, so it strips includes that moc output
silently relies on. Where a type is passed by value (or nested in a
QList/QMap) in a signal or slot signature, the generated moc code needs
the complete type; those includes are kept with an explanatory
`// IWYU pragma: keep`. The same holds for Q_DECLARE_METATYPE targets
such as QSqlDatabase.
A handful of includes are added by hand where callers brace-initialize a
const-reference parameter, which also requires the complete type.
Applied as a single commit on purpose: stripping includes from the
libcockatrice_* headers is precisely what breaks the client, test and
server translation units, and the fixes for those live in the same
translation units. Splitting by component would therefore leave
intermediate commits that do not compile.
All 426 modified Q_OBJECT/Q_GADGET headers were verified to be
moc-self-contained by compiling each generated moc_*.cpp standalone;
several built only because of moc include ordering in
mocs_compilation.cpp before the keep-includes were added.
* [Tooling] Emit public Qt headers and fix IWYU fallout CI found
Three problems the local build could not see, all because a green local
build only proves the configuration it was run under.
Private Qt headers. IWYU emitted private, lowercase Qt headers, and
qtypes.h does not exist at all before Qt 6.9, so the Debian 12 and
Ubuntu 24.04 jobs on Qt 6.4.2 failed to compile. The generator only
emitted a mapping when the capital header name mirrored the private one
(QAbstractAnimation for qabstractanimation.h), so qtypes.h, which is
wrapped by QtTypes instead, got no mapping and kept the private
spelling. Map it explicitly to <QtTypes>, which is public since Qt 5 and
provides the same typedefs either way, and rewrite the 100 affected
includes.
Do not generalize this to "prefer any Qt* wrapper". The table is
generated from whichever Qt is installed, and the wrappers are not
equally old: QtLogging only appeared in Qt 6.8 and QtMinMax in 6.5, so
that heuristic trades one breakage for another. Every other lowercase
header still in the tree has shipped publicly since Qt 5, so those are
left alone.
Platform-guarded includes. IWYU only sees the preprocessor configuration
it is handed, so it dropped an include that only the macOS branch of
main.cpp needs, and the macOS jobs failed on an undeclared
UrlSchemeEventFilter. Restore the include. Force-compiling every file
that carries a platform guard under Q_OS_MAC, Q_OS_MACOS and __APPLE__
reports nothing else, so the macOS branches are covered rather than
assumed.
shellcheck. Drop a leftover variable and stop assigning the
include-what-you-use lookup, which was only ever an existence check.
* [Tooling] Map Qt 6.5+ split headers to QtGlobal for Qt 6.4 compatibility
IWYU emitted QtTypes, QtPreprocessorSupport, QtVersionChecks, QtAssert,
QtMinMax, QtClassHelperMacros, QtEnvironmentVariables and QtTranslation.
Qt 6.5 split those declarations out of qglobal.h into separate headers, so
neither the Qt* wrapper nor the q*.h private name exists on the oldest Qt we
support (6.4.2), and Debian 12 / Ubuntu 24.04 fail with "No such file or
directory". qtypes.h is worse still: it only appeared in Qt 6.9.
QtGlobal is the one spelling that works across the whole supported range. It
has been public since Qt 5, defines these declarations itself up to Qt 6.4, and
includes the split headers from Qt 6.5 on, so redirect all eight private
headers to it and collapse the affected includes in the tree.
Curated overrides now take precedence over the name-mirroring rule, which
cannot know about Qt version floors because the mapping is generated from
whatever Qt is installed. That rule was mapping qtversionchecks.h to
<QtVersionChecks> even with an override present, because the override was only
consulted as a fallback. A curated key that matches nothing is now a hard
error rather than a silent fallback, and the redirected headers are no longer
advertised as the home of a symbol.
Verified every Qt include in the tree resolves against the real
qt6-base-dev 6.4.2 package: 15 distinct includes, 0 missing.
* [Tooling] Map QOverload to QtGlobal and drop the QMetaMethodArgument include
Two more headers IWYU emitted do not exist on Qt 6.4.2:
QOverload was split out of qglobal.h in Qt 6.5, so on 6.4.2 it is declared in
qglobal.h directly and the standalone header is a hard error. QtGlobal covers
both, so map qoverload.h to it like the other 6.5+ split headers.
QMetaMethodArgument is never referenced anywhere in the tree. It is a bare
forwarder for qobjectdefs.h that our generator advertised as a class symbol,
which is how IWYU came to add the include at all. The symbol mappings are
generated from header names, so they cannot tell a forwarder that happens to be
capitalised from a real class; removing the unused include is the fix, and the
generic case stays a known limitation of the generator.
Extending the audit to every Q* header (an earlier pass only matched headers
starting with "Qt" or lowercase q*.h, so it missed all of them) against the real
qt6-base-dev, qt6-multimedia-dev, qt6-declarative-dev, qt6-svg-dev and
qt6-websockets-dev 6.4.2 packages: 341 distinct Qt includes, 0 missing.
* [Game] Give moc the complete CardItem type in player_actions.h
player_actions.h forward declares CardItem but passes QList<CardItem *> by
value in actPlay/actPlayFacedown/actHide. moc instantiates the metatype for
those parameters, and on Qt 6.4 that expands to sizeof(CardItem), so Ubuntu
24.04 fails with "invalid application of 'sizeof' to incomplete type
'CardItem'". Newer Qt tolerates the incomplete type, which is why only the
6.4.2 jobs failed.
Include the defining header with an IWYU pragma keep, matching how the other
MOC-required includes in this area are handled.
* [Game] Give moc the complete ServerInfo_Card type
player_logic.h, game_scene.h, view_zone.h and view_zone_widget.h forward
declare ServerInfo_Card but pass QList<const ServerInfo_Card *> through signal
and slot signatures. moc instantiates the metatype for those parameters, which
Qt 6.4 expands to sizeof(ServerInfo_Card), so the connect in game_scene.cpp
fails on Debian 12 and Ubuntu 24.04 with "invalid application of 'sizeof' to
incomplete type 'const ServerInfo_Card'". Newer Qt tolerates it, so only the
6.4.2 jobs failed.
Include the generated protobuf header with an IWYU pragma keep, following the
pattern already used for ServerInfo_Player and ServerInfo_User in
game_event_handler.h.
* [Client] Complete the types Qt 6.4 needs for connect and moc
Qt 6.4 expands QMetaType::fromType on the normalised argument list of a
PMF connect and on moc-generated metatypes, which requires sizeof on every
signal and slot parameter. Newer Qt tolerates forward declarations there,
so only the Debian 12 and Ubuntu 24.04 jobs failed, with
"invalid application of 'sizeof' to incomplete type" for QMouseEvent,
QPrinter and GameReplay.
Replace the forward declarations with the real includes:
- QMouseEvent in the nine widget headers that pass it through signals
- QPrinter in abstract_tab_deck_editor.cpp, for the actPrintDeck lambda
- game_replay.pb.h in tab_replays.h. GameReplay is a protobuf message, so
the project's game/replay.h only forward declares it and cannot supply
the complete type.
Found by recompiling all 1918 project TUs against the Debian Qt 6.4.2
headers, which reproduces those two CI jobs locally in one pass.
* [Client] Complete Release and QMenu for Qt 6.4 moc and connect
Continuing the Qt 6.4 complete-type sweep:
- window_main.cpp connects ClientUpdateChecker::finishedCheck to
MainWindow::checkClientUpdatesFinished, whose Release * parameter made
moc 6.4 instantiate the metatype. GameReplay turned out to be a protobuf
message, so Release likewise needed release_channel.h in the three
headers declaring those signals: window_main.h, dlg_update.h and
client_update_checker.h.
- moc 6.4 also needs sizeof(QMenu) for the QList<QMenu *> carried by
TabSupervisor::setMenu and MainWindow::updateTabMenu.
Verified by regenerating moc output with the Debian moc 6.4.2 for all 434
Q_OBJECT/Q_GADGET classes and compiling it, plus recompiling all 1612
source TUs, against the Qt 6.4.2 headers: no remaining failures.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Translations] Load Qt's own translations and build ours with the binary
Three separate bugs kept translations from working.
installNewTranslator() loaded the application translation into
qtTranslator. QTranslator discards its previous contents on every load, so
that wiped the qt_<lang>.qm loaded one line earlier and installed an empty
translator instead. Qt's own strings were never translated on any platform.
Give each file its own translator.
QLibraryInfo::path(TranslationsPath) was the only directory searched for
Qt's translations. A relocated Qt can report a path that does not exist: the
KDE Flatpak runtime reports /usr/translations while its files live in
/usr/share/qt6/translations. Probe the usual install layouts and only hand
back the ones that exist.
The .qm files were attached to the default build target only, so building
the executable on its own left it without any translations and the language
selector empty. Attach them to the target as well.
Move the shared lookup into TranslationLoader so client and Oracle cannot
drift again, and have it report a missing translation at debug level. An
unset language is the default for English, which has no file to begin with,
and warning about it only added noise to every fresh debug log.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Tests] Define main() in translation_loader_test
Without a GTest installation the fallback in tests/CMakeLists.txt links
only gtest, not gtest_main, so the test has to bring its own main(). Every
other test already does; only this one relied on the distribution package
and failed to link on CI.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Tests] Put the translation loader fixture next to the test executable
A multi-config generator (MSBuild, Xcode) writes the executable to a
per-config subdirectory while the .qm stays in the current binary
directory, so applicationDirPath() never saw the fixture and
ABuildTreeFindsTheTranslationsNextToTheExecutable failed on Windows.
* [Translations] Depend on Qt's lrelease target and skip the loader test without lrelease
Attaching the .qm custom commands to a second custom target races with
Qt's own <Project>_lrelease target on MSBuild/Makefiles and is rejected
by Xcode, so depend on Qt's target instead. Only build the translation
loader test when Qt6::lrelease is available.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Co-authored-by: ZeldaZach <zahalpern+github@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* [Settings] Back up the settings folder before migrating
The per-file settings migration only preserved global.ini, as
global.ini.old. Everything else the migrations write was overwritten in
place with no way back: the legacy migration and the 17 per-domain
migrateXxxSettings functions all write straight into the per-domain .ini
files, so any of them that got a key mapping wrong silently replaced a
working file. The re-migration path is the sharpest case, because
migrateSettingsFromGlobalIni() runs again whenever an older build wrote
non-sentinel keys back into global.ini, and those values then land on
top of per-domain files the user had already edited.
Snapshot the whole settings folder before either migration runs, into a
timestamped sibling settings-backup-<yyyyMMdd-HHmmss>. A sibling rather
than a child, so a backup is never copied into the next backup and the
"Open Settings Folder" action keeps showing only live files. Keep every
snapshot; settings files are kilobytes, so growth is not a concern.
SettingsMigration::isMigrationPending() gates the copy so a normal start
creates nothing. It reuses the same condition migrateSettingsFromGlobalIni()
uses to decide whether it has work, factored into a shared helper so the
two cannot drift, and it ignores the legacy migration on an empty profile
where that migration only writes its sentinel. The backup itself skips a
folder whose files are all empty, which covers a fresh profile whose
global.ini was created but never written.
A failed copy logs a warning and returns an empty path rather than
aborting the migration, since a full disk or an unwritable data folder
must not leave the client unable to start. global.ini.old still works as
the single-file escape hatch.
Document the folder layout, the automatic backups, and the fact that
migrations only run forwards, so users know to copy the settings folder
before downgrading to a version that cannot read the per-group files.
* [Client] Match the desktop file name case for the portal app ID
QGuiApplication::setDesktopFileName() was given "Cockatrice"/"Oracle"
while the installed desktop entries are cockatrice.desktop and
oracle.desktop. Linux paths are case-sensitive, so xdg-desktop-portal
failed the app-info lookup for "Cockatrice" and Qt warned on every
QDesktopServices call that it could not register with the host portal.
The same string becomes the xdg-shell appId, so the window icon lookup
failed on Wayland for the same reason.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Build] Keep Windows installs free of build-tree artifacts
Several Windows packaging gaps could leak Visual Studio CMake build
output into the installed application or the NSIS installer:
- The per-app DLL sweep used
${CMAKE_BINARY_DIR}/${PROJECT_NAME}/${CMAKE_BUILD_TYPE}, which is
empty on multi-config generators, collapsing the recursive
DIRECTORY install into the whole build tree (containing *.dir,
*_autogen, .qt, .qsb, x64, ...). Point it at the real per-config
output with $<TARGET_FILE_DIR:...> and exclude build artifacts.
- install(FILES ${OPENSSL_INCLUDE_DIRS} ...) tried to install OpenSSL
include directories as files. CMake refuses this
("install FILES given directory"); it only slipped through CI
because the vcpkg OpenSSL config leaves the variable empty. Remove it;
fixup_bundle already ships the OpenSSL runtime DLLs.
- The NSIS uninstaller only deleted *.exe/*.dll and a few known files,
so build-tree leftovers survived an uninstall/reinstall cycle. Wipe
the whole directory tree instead.
- Add a Windows CI gate that lists the packaged installer with 7-Zip
and fails the build if any build-tree artifact path is found.
* Update .ci/compile.sh
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* [Build] Rework Windows installer artifact exclusions per review
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* [Client] Show localized card names, texts and pictures
Localization wiring now runs end to end: the oracle importer collects
foreignData for the configured language and the client renders it.
- [Oracle] Import localized names and rules texts for the selected cardLang
- single-face cards store their foreignData name and full text
- multi-face (split/adventure/aftermath/prepare) cards collect the joined
name once and join each face's translated text with the same separator
as the English merge; an incomplete translation falls back to English;
the joined text follows the same highest-priority-set policy as the
single-face path and is only collected when localization is enabled
- the wizard switching languages re-imports the card database
- [Client] Display localized card info throughout the client
- card info text/picture widgets and the game board re-render on language
change
- pictures resolve cardLang art through Scryfall's named endpoint using the
localized name, falling back to id-based art when no match exists
- deck editor keeps canonical English names as card identity (EditRole)
while showing localized names (DisplayRole), so decks and wire names
stay stable
- [Card] Add CardLocalization-backed name/text lookup and cards.xml v4
localization elements with a bounded-size translation cache
- [Tests] Cover oracle foreignData import (incl. multi-face joins, priority
and fallback paths), XML v4 localization parsing, deck model localized
display and the language-aware settings default
Existing installations need to re-run Oracle to see translations: localized
data only lands in cards.xml when the Oracle app is started with the
preferred language selected — launch the separate "Oracle" program that
ships with Cockatrice, pick the language in the wizard and let it re-import
the card database.
The client's database cache (cards.xml.cache) is invalidated by the cache
format bump and the source-hash checks, but a cache written before the
re-import can still hold English-only entries (the hash uses file size and
mtime, so a same-size/same-timestamp rewrite may be served as-is); delete
cards.xml.cache and relaunch if no localized names/texts show up after
re-importing.
* [Card] Pass localized card names and texts into CardInfo construction
Address review: instead of constructing the card and then calling
setLocalizedName/setLocalizedText (which emit a cardInfoChanged signal per
language), both constructors, both newInstance overloads and their callers
(cards.xml v4 parser and the binary cache reader) now pass the localized maps
as constructor arguments.
* [Client] Rename LocalizedCard:: helpers namespace to CardLocalization
The namespace now matches its header file name, as the review pointed out;
LocalizedCard reads more like a class or struct. Callers (card info text
widget, board card name rendering) are updated to match.
* [Client] Drop unused info member from the card info text widget
The CardInfoPtr member was only ever initialized to nullptr and never read;
remove it together with its initializer.
* [PictureLoader] Add the localized picture URL explicitly, not implicitly
Address review: silently prepending the Scryfall named-picture URL to the
download list whenever a non-English card language was active was surprising,
consumed quota per card when it failed, and could grab the wrong (canon) art on
name collisions, with no way to turn it off.
The insert is now opt-in and user-controlled: changing the card language adds
the template to the top of the download URLs once (persisted, documented in the
re-import prompt, and editable/removable in the deck editor settings), while the
picture loader no longer injects it at request time.
* [Card] Show card languages in the same native (English) format as the UI
Address review: the card text & images language dropdown listed bare native
names, some in inconsistent lowercase (e.g. "čeština", "español de España"),
which makes the languages easy to mix up for users that do not read the script
(e.g. 日本語 vs 한국어). It now mirrors the UI language dropdown and always pairs
the native name with its English name (e.g. "Deutsch (German)",
"日本語 (Japanese)"), using the same fixed casing.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Add scheme-variant theme asset resolution (#7209-1)
ThemeManager::assetPath() and schemeVariantPath() resolve a theme asset to its scheme-variant file (prefix-light/dark.png) with fallback to the plain asset, and themePixmap()/loadBrush()/loadExtraBrush() use them. CSS files load style-dark.css or style-light.css when present. Home widget re-resolves its background on theme change.
Link pixel_map_generator.cpp into the oracle target, which needs Qt6::Xml for QDomDocument.
* Fix clang-format wrap of theme format probe lists
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Server] Instrument command processing, game starts, and event loops
Add a lock-free MetricsRegistry that accumulates per-command processing
times in preallocated histogram slots (one per protobuf command type,
bucketed at 1/5/10/25/50/100/250/500/1000/2500/5000 ms +Inf). The
hot-path observeCommand() uses only relaxed atomic adds — no locks,
no allocations, no cache-line ping-pong beyond the unavoidable counter
updates.
Wire the registry into AbstractServerSocketInterface::processCommandContainer()
so every processed command is attributed with its container's wall-clock
time. When a container exceeds metrics/slow_command_ms (default 500),
a warning is logged including the connected username.
Add an EventLoopWatchdog heartbeat that runs on every socket pool thread.
If a heartbeat overshoots metrics/stall_warn_ms (default 2000 ms), the
overshoot is recorded in atomic counters and a warning is logged. Both
thresholds are configurable in servatrice.ini; setting stall_warn_ms to 0
disables the watchdogs entirely.
Track game-start durations via a separate histogram in MetricsRegistry.
Server_Game::startGameNow() measures the time from zone creation through
player materialization and reports it via Server::observeGameStartDurationMs().
Add a live card-count gauge: Server_Game exposes getCardsInGame() and
Servatrice::getCardsInGamesTotal() sums across all running games under
the appropriate read locks.
Include a standalone metrics_registry_test (Google Test) that validates
empty registries, single/multi-sample histograms, kind encoding,
overflow-slot collapse, negative-duration clamping, gauge rendering,
and the game-start histogram separation.
Took 10 minutes
* [Client/Server/Protocol] Surface live metrics in the Developer tab
Extend Response_GetServerStats with live counters from the in-process
MetricsRegistry: cards in games, event loop stall totals/worst,
total commands processed, average command time, active command types,
and game-start count/duration. Add a repeated CommandStats message
carrying per-command breakdowns (kind, extension number, resolved
protobuf name, count, total ms) for every type that has seen at
least one sample.
Server-side cmdGetServerStats() populates all new fields after the
existing DB uptime snapshot query, resolving protobuf extension names
via the descriptor pool for human-readable labels like
session/Command_Ping.
Expand TabDeveloper with two tables: an overview section (existing
DB stats plus the new live metrics) and a per-command breakdown table
(Command / Count / Total ms / Avg ms) sorted by total_ms descending
so the hottest commands surface first.
Took 55 minutes
Took 47 seconds
* [Server] Drop dead Prometheus histogram, add developer command metrics, fix watchdog init order
- metrics_registry: remove toPrometheusText/appendCumulativeBuckets and the time-bucket histogram that nothing in production ever emitted (the future /metrics exporter can bring it back); keep counts/totals read by the Developer tab
- Fix +Inf bucket routing that never incremented, and its test that locked the bug in
- Instrument developer_command container (kind 6) in processCommandContainer and stats label resolution
- Read metrics/{slow_command_ms,stall_warn_ms} at the top of initServer() so stall_warn_ms=0 disables the watchdogs before pool threads start
- Shrink KindStride to 1280 (largest extension in use is 1206) with a static_assert; document scrape cost of getCardsInGamesTotal; note slow_command logging has no rate limit in servatrice.ini.example
* [Tests] Give metrics_registry_test an explicit main
* [Server] Record only the dispatched command family; drop unused totals
processCommandContainer recorded every family in a container even though
the base if/else-if dispatch processes at most one. An unauthenticated
client could batch a session command (login) with fabricated developer,
moderator, and admin entries and forge genuine-looking samples that were
never executed or authorized. Mirror the base's selection, skip when the
handler was already deleted, and skip entries whose extension number is
-1 (which would otherwise wrap into the previous kind's id range).
[Server] Drop dead process-lifetime byte/uptime counters
txBytesTotal/rxBytesTotal added an atomic RMW to every socket write and
read for counters nothing consumes (cmdGetServerStats fills tx_bytes,
rx_bytes, and uptime_secs from the DB snapshot). Remove the two atomics
and the getTxBytesTotal/getRxBytesTotal/getUptimeSeconds getters; the
incTxBytes/incRxBytes slots and mutexes remain for the ISL legacy
counters.
[Protocol] Document kind 5 as developer in CommandStats
NumKinds is 6 and the server emits kind_index = 5 for developer
commands; the comment stopped at 4.
* [Client] Togglable auto-refresh for Developer stats tab
* [Oracle] Fix clang-format alignment of card type priority list
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Oracle/Client] Report card database download progress
Card database updates ran invisibly: MTGJSON parsing spun an indeterminate
bar on the UI thread and the set import blocked the window, while the
onboarding wizard spawned `oracle -b` with no progress to show at all.
- Add byte-level scan progress to `RawJson::scanSetRanges` via an optional
callback, throttled to ~100 reports per scan.
- Emit `OracleImporter::dataReadProgress` during the scan and import sets on a
worker thread, driving the wizard's progress bar per set.
- With `-b`, write machine-readable `PROGRESS <stage> <done> <total>` lines to
stdout for the download/scan/import stages; stderr keeps the log output.
- Parse the oracle stdout in `MainWindow` and forward it to the onboarding
wizard, giving the card database step a determinate bar with stage-specific
status text.
- Guard the async workers against the wizard being closed mid-run.
- Add Google Test coverage for scan progress reporting.
* [Oracle/Client] Harden oracle progress workers and quit prompt
Address review feedback on the download-progress change: decompress and read
sets files off the UI thread, cancel the load/import workers before the
wizard can tear down the importer, and show an 'Extracting file...' status
plus a clean 100% tail so the poll never looks stuck. Quitting Cockatrice
while a card database update runs now asks for confirmation.
* Show 100% for 500ms on complete.
* Disable buttons on set import until done.
* Clean up progress bar.
* Drop wrapper around lambda
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Oracle] Prefer higher-priority maintype when merging split cards
Adventure cards (e.g. Bonecrusher Giant, Virtue of Knowledge) are stored as
split cards in MTGJSON, with a Creature/permanent face and an Instant/Sorcery
adventure face. When the two faces are merged into a single card, the code
previously discarded the second face's maintype entirely, keeping whichever
face was processed first.
If the Instant/Sorcery adventure face appeared first, the merged card got
maintype 'Instant' with tableRow 3. At runtime this made double-clicking the
card on the stack send it to the graveyard instead of the table
(PlayerActions::playCard).
Fix the merge to follow the same priority order used by getMainCardType()
(Planeswalker > Creature > Land > Sorcery > Instant > Artifact > Enchantment),
so the permanent Creature type wins for adventure cards regardless of face
order, matching the physical card and the reported expectations.
Closes#4394
* Extract helper.
* Simplify const
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Oracle] Parse sets lazily to slash importer peak memory
- Add a raw JSON scanner that splits the document into per-set byte ranges
without materializing the JSON tree
- Keep only the raw document bytes and parse one set at a time in startImport
- Take readSetsFromByteArray by value so the wizard's buffer is moved, not copied
- Clear the retained raw data in releaseSetData()/clear()
- Cover the scanner and lazy parsing with tests
Took 2 minutes
* [Oracle] Fix nesting-depth cap, tolerate unescaped control chars, lazy-parse review fixes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Build] Add precompiled headers for Qt-backed executables
Reparsing QtCore/QtGui/QtWidgets/QtNetwork in ~460 client translation
units is the dominant compilation cost. Precompile the two common layers:
- qtcore_pch.h (Qt Core only; safe even for headless Servatrice)
- qtwidgets_pch.h (adds Gui/Widgets/Network; used by Cockatrice and Oracle)
target_precompile_headers() requires CMake 3.16, now the project minimum.
Estimated 30-50% faster client rebuilds.
* [Build] Format qtwidgets precompiled header
clang-format include regrouping and a missing trailing newline.
* [Build] Add PCH-aware ccache sloppiness config; format cmake/pch headers
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Oracle] Add oracle importer tests and fix set parsing details
- Add oracle_importer_test and oracle_importer_benchmark_test targets
- Preserve the first printing's legalities when an existing card is reused
- Concatenate split-card coloridentity and sort/dedupe card colors
- Use a raw string for the Basic Land format regex
- Pre-allocate the card hash and micro-optimize string handling
Took 2 minutes
* [Oracle/Tests] Pin cmc coercion in CI run; scope the reserve pass
The #7214 coercion assertion lived only in oracle_importer_benchmark_test,
which gets no add_test and so never runs under ctest. Add NumericManaValueCoercedToCmc
and LegacyConvertedManaCostCoercedToCmc to oracle_importer_test (a CI-ran
binary): manaValue/convertedManaCost are JSON numbers in AllPrintings, and
QJsonValue::toString() would drop them to an empty cmc without the
#7214 coercion fix.
Wrap the distinct-name reserve pass in a bare block so the ~35k name
QStrings are handed back before the memory-heavy import loop starts.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Oracle] Replace vendored QtJson with native QJson for set import
- Drop the vendored oracle/src/qt-json/json.{h,cpp} implementation
- Switch SetToDownload and importCardsFromSet from QList<QVariant> to
native QJsonArray/QJsonObject
- Release set JSON data after import in the save sets page
Took 20 minutes
* [Oracle] Restore property coercion and legality merge in native JSON import
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Cards] Artist attribution
Took 7 minutes
Took 4 minutes
* Nudge attribution pill on home screen to align
Took 3 minutes
Took 28 seconds
Took 38 seconds
* Lint.
Took 3 minutes
* Lint.
Took 2 minutes
* Fix rebase whoopsie
Took 5 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [CI] Remove Qt5
Took 10 minutes
Took 9 minutes
* Revert CI failure and fix up comments
Took 4 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Card Database] Improve loading times through binary cache
Took 10 minutes
Took 9 minutes
Took 16 seconds
* [Card Database] Remove lib qt include
Took 18 minutes
Took 14 seconds
* Downgrade to 6.3 datastream
Took 5 minutes
* go up to 6.4 datastream
Took 1 minute
* Address comments
* Small bug fixes
Took 20 minutes
Took 10 seconds
* More fixes.
Took 4 minutes
Took 4 seconds
* Even more fixes.
Took 11 minutes
Took 4 seconds
* More fixes.
Took 6 minutes
Took 26 seconds
Took 8 minutes
* Namespace instead of class
Took 6 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Settings] Split cache_settings into multiple files
Took 9 minutes
Took 4 minutes
* [Settings] Fwd declare settings classes in cache_settings
Took 15 minutes
* Fix oracle includes.
Took 8 minutes
* Address comments, fix windows CI
Took 8 minutes
* fix copy constructor visibility
Took 3 minutes
* lint
Took 2 minutes
* Fix native format tests.
Took 5 minutes
* Remove test header guard
Took 4 seconds
* Remove tests invalid in CI environ
Took 24 seconds
* Adjust to rebase.
Took 11 minutes
* Change settings file name.
Took 8 minutes
---------
Co-authored-by: Lukas Brübach <lukas.bruebach@bdosecurity.de>
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [App/Theme] Palette Editor
Took 1 minute
Took 1 hour 47 minutes
Took 6 seconds
Took 3 minutes
Took 5 minutes
Took 3 minutes
* Add oracle, add palette files and configs.
Took 10 minutes
* Fix a stupid include mistake, thanks IDE
Took 3 minutes
Took 20 seconds
* Includes.
Took 4 minutes
* Fix ampersand not displaying correctly.
Took 14 minutes
* Longer variable names.
Took 10 minutes
Took 5 seconds
* Change ampersand everywhere
Took 23 seconds
* Doxygen properly.
Took 1 minute
* Remove namespace, fold I/O into structs.
Took 12 minutes
* Remove namespace, fold I/O into structs.
Took 33 seconds
* Alphabetize.
Took 35 seconds
* Lint.
Took 49 seconds
* Add a combo box to quick switch settings.
Took 19 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* style: Add braces to all control flow statements
Standardize code style by adding explicit braces to all single-statement
control flow blocks (if, else, for, while) across the entire codebase.
Also documents the InsertBraces clang-format option (requires v15+) for
future automated enforcement.
* InsertBraces-check-enabled
the adventure side of adventure cards used to be the first entry in
mtgjson, at some point this changed to the second entry, better
reflecting its secondary nature, however cockatrice has hardcoded the
treatment of the card to assume the second part was the "main" part,
when implementing the treatment of prepare layout cards (#6792) I
copied the behavior over which was then already incorrect, this pr
removes the special treatment of this card layout bringing the result
back in line with expectation: the main part of the card provides the
main type used in cockatrice for sorting and behavior
* Use fusions own palette.
Took 6 minutes
* Start from default palette always.
Took 4 minutes
* Add modern style.
Took 24 seconds
* Scope this fix to Windows.
Took 4 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Translate oracle/oracle_en@source.ts in de
100% translated source file: 'oracle/oracle_en@source.ts'
on 'de'.
* Translate oracle/oracle_en@source.ts in de
100% translated source file: 'oracle/oracle_en@source.ts'
on 'de'.
---------
Co-authored-by: transifex-integration[bot] <43880903+transifex-integration[bot]@users.noreply.github.com>
* [Card DB] Properly pass along set priority controller to parsers
Took 16 minutes
Took 35 seconds
* More adjustments.
Took 13 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
