* [VisualDatabase] Draw the card grid with a model/view instead of a widget per card
The visual card database built one CardInfoPictureWithTextOverlayWidget per
card, 100 per page, and tore them down on every search, resize and scroll
page. It also looked each card up again by name from the model row, kept a
shadow QList<ExactCard>, and carried paging state plus a 5 s timer that only
existed to defer the first page.
Replace that with a real view on a flattened model:
- CardDatabaseDisplayModel gains CardInfoRole and cardInfoAt(), so a view can
get the CardInfoPtr behind a proxy row without a name round trip.
- New CardDatabaseVisualDisplayModel (libcockatrice_models) flattens the
filtered and sorted proxy into one entry per displayed card picture: the
preferred printing normally, every printing of the selected sets while set
filters are active. Proxy changes rebuild it on a 30 ms coalescing timer.
- New CardDatabaseVisualView (QListView IconMode) paints only visible rows
through the new CardPictureDelegate, keeps the old interaction contract
(left/right/middle press -> cardClicked, hover -> cardHovered, Ctrl+wheel
resize, no selection, no focus stealing, scroll to top on a new result) and
repaints when CardPictureLoader reports an async image.
- CardSizeWidget::enableCtrlScrollResize() also watches scroll-area viewports,
which is what makes Ctrl+wheel work over a QListView.
- VisualDatabaseDisplayWidget drops the paging, the shadow list, the dead
members and the 5 s timer.
Behaviour-preserving: no gameplay change, no new user-facing strings.
* [VisualDatabase] Fix the card grid wheel step
QListView hands the delegate's item height to the scroll bar as its single step under ScrollPerPixel, so QAbstractSlider moved wheelScrollLines() whole card rows per notch. Handle the wheel in the view instead: one line is an eighth of the grid cell, so a notch moves about a third of a card row at any card size and still follows the OS line count.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
The local picture loader walked the whole custom picture tree every ten
seconds on the GUI thread. Watch the root and every subdirectory with
QFileSystemWatcher, debounce bursts of events into a single 500 ms refresh,
and keep a five-minute fallback poll for filesystems where watching fails.
Add an explicit-path constructor and indexedPaths() so the indexing can be
tested without SettingsCache, and emit indexChanged() after a rebuild.
Verification: cockatrice built.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Network] Add a configured QNetworkAccessManager factory
Every HTTP caller built its own QNetworkAccessManager, so the system proxy
and a transfer timeout were easy to omit. Add NetworkManagerFactory::create()
as the single place that applies the process-wide proxy configuration and a
transfer timeout, and use it at all 14 construction sites.
Per-site settings such as disk caches and manual redirect policies stay with
their callers.
* [Tests] Link libcockatrice_network into the tests that compile its headers
release_channel.cpp and card_picture_loader_worker.cpp now include
libcockatrice/network/network_manager.h, but the test targets that compile
them only linked libcockatrice_settings, so the include directory never
reached them and every platform failed with "file not found":
loader_local_matching_test and picture_loader_benchmark_test.
libcockatrice_network is an INTERFACE library, so linking it costs these
targets nothing but hands over the include path.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [CardDB] Avoid copying printing maps and property strings
Reading a card's sets was a measured hotspot: `SetToPrintingsMap setMap =
card->getSets();` copies the whole QMap, and then iterating it with a
non-const iterator detaches and deep-copies every PrintingInfo, including
its property hash, on first use. A micro-benchmark of that exact pattern
(copy plus non-const iteration) came out about 19x slower than a const
reference over the same data.
The querier, the cache writer, the XML writer, the picture loader and the
printing/set selection widgets now take `getSets()` by const reference and
only use const iterators. The tests that iterate generated data are
covered by the existing card database and picture loader suites.
String accessors were also returning by value where the value lives in a
hash that has already been materialized:
- CardInfo::getProperty() and the legacy getCardType()/getColors()/
getManaCost()/getCmc()/getPowTough()/getLoyalty() accessors,
- PrintingInfo::getProperty(), getUuid(), getFlavorName(), getArtist(),
and getSet(),
- ExactCard::getPrinting() and getCardPtr(),
- CardSet::getShortName(), getLongName() and getSetType().
getPrinting() in particular copied a PrintingInfo on every call, and a
copy of an unmaterialized PrintingInfo has to take the properties mutex.
Callers that need an owned copy still get one; the rest just read.
Other allocation removals in the same path:
- LazyPropertiesHash::ensureMaterialized() checks an atomic flag before
taking the mutex, so property reads after the first one do not lock.
The flag is release-stored after materialization and acquire-loaded by
readers/copies, preserving the existing locking for the first read.
- CardSet::getCorrectedShortName() no longer rebuilds its QSet of
reserved Windows file names on every call.
- CardSet::getIsKnownIgnored() no longer formats the release date into a
throwaway string just to check its length.
- The querier builds its card-type/format count caches without
`cards.values()` or a properties key list, reserves its result lists,
and picks a random card without materializing `cards.keys()`.
- The querier's pinned-printing path reuses the CardInfoPtr it already
has instead of looking the card up again by name.
- CardDatabaseCache/XML serialization copy the alt-name QSet by
reference.
- The picture loader compiles its !prop!/!set! regular expressions once
instead of per URL template, and walks the transform map with an
iterator instead of keys() plus operator[].
Full build and ctest (628 tests) pass.
* [CardDB] Address review comments
PrintingInfo is a value type: it is stored in QLists and returned by value
from the querier, so a const-ref getter can hand out a reference into a
temporary. Return the QStrings and the CardSetPtr by value again.
The constFind lookup stays, so a property read still never materializes the
lazy property hash - only the last shared-data refcount is paid.
* [CardDB] Undo the const-ref QString return changes
QString is implicitly shared, so returning by value costs only a refcount
and avoids handing out references into a lazily materialized hash. The
constFind lookups stay, so a property read still never materializes the
hash.
* [CardDB] Use QMap::asKeyValueRange() in transformUrl
The range is a view over the map's own iterators and yields references to
the stored key and value, so it keeps the no-allocation property of the
manual const iteration.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [DeckList] Apply include-what-you-use to libcockatrice_deck_list
* [IWYU] Apply include-what-you-use across the tree
Run one whole-tree IWYU pass over the libcockatrice_* libraries, the
Cockatrice client, Oracle, Servatrice and the test suite, so each
translation unit includes what it uses directly and forward-declares
what it does not need.
IWYU only analyses real translation units, never the moc code CMake
generates from Q_OBJECT headers, so it strips includes that moc output
silently relies on. Where a type is passed by value (or nested in a
QList/QMap) in a signal or slot signature, the generated moc code needs
the complete type; those includes are kept with an explanatory
`// IWYU pragma: keep`. The same holds for Q_DECLARE_METATYPE targets
such as QSqlDatabase.
A handful of includes are added by hand where callers brace-initialize a
const-reference parameter, which also requires the complete type.
Applied as a single commit on purpose: stripping includes from the
libcockatrice_* headers is precisely what breaks the client, test and
server translation units, and the fixes for those live in the same
translation units. Splitting by component would therefore leave
intermediate commits that do not compile.
All 426 modified Q_OBJECT/Q_GADGET headers were verified to be
moc-self-contained by compiling each generated moc_*.cpp standalone;
several built only because of moc include ordering in
mocs_compilation.cpp before the keep-includes were added.
* [Tooling] Emit public Qt headers and fix IWYU fallout CI found
Three problems the local build could not see, all because a green local
build only proves the configuration it was run under.
Private Qt headers. IWYU emitted private, lowercase Qt headers, and
qtypes.h does not exist at all before Qt 6.9, so the Debian 12 and
Ubuntu 24.04 jobs on Qt 6.4.2 failed to compile. The generator only
emitted a mapping when the capital header name mirrored the private one
(QAbstractAnimation for qabstractanimation.h), so qtypes.h, which is
wrapped by QtTypes instead, got no mapping and kept the private
spelling. Map it explicitly to <QtTypes>, which is public since Qt 5 and
provides the same typedefs either way, and rewrite the 100 affected
includes.
Do not generalize this to "prefer any Qt* wrapper". The table is
generated from whichever Qt is installed, and the wrappers are not
equally old: QtLogging only appeared in Qt 6.8 and QtMinMax in 6.5, so
that heuristic trades one breakage for another. Every other lowercase
header still in the tree has shipped publicly since Qt 5, so those are
left alone.
Platform-guarded includes. IWYU only sees the preprocessor configuration
it is handed, so it dropped an include that only the macOS branch of
main.cpp needs, and the macOS jobs failed on an undeclared
UrlSchemeEventFilter. Restore the include. Force-compiling every file
that carries a platform guard under Q_OS_MAC, Q_OS_MACOS and __APPLE__
reports nothing else, so the macOS branches are covered rather than
assumed.
shellcheck. Drop a leftover variable and stop assigning the
include-what-you-use lookup, which was only ever an existence check.
* [Tooling] Map Qt 6.5+ split headers to QtGlobal for Qt 6.4 compatibility
IWYU emitted QtTypes, QtPreprocessorSupport, QtVersionChecks, QtAssert,
QtMinMax, QtClassHelperMacros, QtEnvironmentVariables and QtTranslation.
Qt 6.5 split those declarations out of qglobal.h into separate headers, so
neither the Qt* wrapper nor the q*.h private name exists on the oldest Qt we
support (6.4.2), and Debian 12 / Ubuntu 24.04 fail with "No such file or
directory". qtypes.h is worse still: it only appeared in Qt 6.9.
QtGlobal is the one spelling that works across the whole supported range. It
has been public since Qt 5, defines these declarations itself up to Qt 6.4, and
includes the split headers from Qt 6.5 on, so redirect all eight private
headers to it and collapse the affected includes in the tree.
Curated overrides now take precedence over the name-mirroring rule, which
cannot know about Qt version floors because the mapping is generated from
whatever Qt is installed. That rule was mapping qtversionchecks.h to
<QtVersionChecks> even with an override present, because the override was only
consulted as a fallback. A curated key that matches nothing is now a hard
error rather than a silent fallback, and the redirected headers are no longer
advertised as the home of a symbol.
Verified every Qt include in the tree resolves against the real
qt6-base-dev 6.4.2 package: 15 distinct includes, 0 missing.
* [Tooling] Map QOverload to QtGlobal and drop the QMetaMethodArgument include
Two more headers IWYU emitted do not exist on Qt 6.4.2:
QOverload was split out of qglobal.h in Qt 6.5, so on 6.4.2 it is declared in
qglobal.h directly and the standalone header is a hard error. QtGlobal covers
both, so map qoverload.h to it like the other 6.5+ split headers.
QMetaMethodArgument is never referenced anywhere in the tree. It is a bare
forwarder for qobjectdefs.h that our generator advertised as a class symbol,
which is how IWYU came to add the include at all. The symbol mappings are
generated from header names, so they cannot tell a forwarder that happens to be
capitalised from a real class; removing the unused include is the fix, and the
generic case stays a known limitation of the generator.
Extending the audit to every Q* header (an earlier pass only matched headers
starting with "Qt" or lowercase q*.h, so it missed all of them) against the real
qt6-base-dev, qt6-multimedia-dev, qt6-declarative-dev, qt6-svg-dev and
qt6-websockets-dev 6.4.2 packages: 341 distinct Qt includes, 0 missing.
* [Game] Give moc the complete CardItem type in player_actions.h
player_actions.h forward declares CardItem but passes QList<CardItem *> by
value in actPlay/actPlayFacedown/actHide. moc instantiates the metatype for
those parameters, and on Qt 6.4 that expands to sizeof(CardItem), so Ubuntu
24.04 fails with "invalid application of 'sizeof' to incomplete type
'CardItem'". Newer Qt tolerates the incomplete type, which is why only the
6.4.2 jobs failed.
Include the defining header with an IWYU pragma keep, matching how the other
MOC-required includes in this area are handled.
* [Game] Give moc the complete ServerInfo_Card type
player_logic.h, game_scene.h, view_zone.h and view_zone_widget.h forward
declare ServerInfo_Card but pass QList<const ServerInfo_Card *> through signal
and slot signatures. moc instantiates the metatype for those parameters, which
Qt 6.4 expands to sizeof(ServerInfo_Card), so the connect in game_scene.cpp
fails on Debian 12 and Ubuntu 24.04 with "invalid application of 'sizeof' to
incomplete type 'const ServerInfo_Card'". Newer Qt tolerates it, so only the
6.4.2 jobs failed.
Include the generated protobuf header with an IWYU pragma keep, following the
pattern already used for ServerInfo_Player and ServerInfo_User in
game_event_handler.h.
* [Client] Complete the types Qt 6.4 needs for connect and moc
Qt 6.4 expands QMetaType::fromType on the normalised argument list of a
PMF connect and on moc-generated metatypes, which requires sizeof on every
signal and slot parameter. Newer Qt tolerates forward declarations there,
so only the Debian 12 and Ubuntu 24.04 jobs failed, with
"invalid application of 'sizeof' to incomplete type" for QMouseEvent,
QPrinter and GameReplay.
Replace the forward declarations with the real includes:
- QMouseEvent in the nine widget headers that pass it through signals
- QPrinter in abstract_tab_deck_editor.cpp, for the actPrintDeck lambda
- game_replay.pb.h in tab_replays.h. GameReplay is a protobuf message, so
the project's game/replay.h only forward declares it and cannot supply
the complete type.
Found by recompiling all 1918 project TUs against the Debian Qt 6.4.2
headers, which reproduces those two CI jobs locally in one pass.
* [Client] Complete Release and QMenu for Qt 6.4 moc and connect
Continuing the Qt 6.4 complete-type sweep:
- window_main.cpp connects ClientUpdateChecker::finishedCheck to
MainWindow::checkClientUpdatesFinished, whose Release * parameter made
moc 6.4 instantiate the metatype. GameReplay turned out to be a protobuf
message, so Release likewise needed release_channel.h in the three
headers declaring those signals: window_main.h, dlg_update.h and
client_update_checker.h.
- moc 6.4 also needs sizeof(QMenu) for the QList<QMenu *> carried by
TabSupervisor::setMenu and MainWindow::updateTabMenu.
Verified by regenerating moc output with the Debian moc 6.4.2 for all 434
Q_OBJECT/Q_GADGET classes and compiling it, plus recompiling all 1612
source TUs, against the Qt 6.4.2 headers: no remaining failures.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
CardPictureLoaderLocal compared the full file name (including extension)
of the custom-folder candidate against the extension-stripped base name of
each directory entry, so a CUSTOM subfolder image like
pics/CUSTOM/poker/1 of Hearts.png never matched and the card fell through
to the network. Compare the complete base names instead.
Add matcher tests covering CUSTOM subfolder resolution.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* tests: add manual picture loader benchmark against the real card hosts
(cherry picked from commit 588d71d3b9a8278ab98b847802908f322c1035b7)
* tests: address review on picture loader benchmark
- Sandbox via unique app/org names plus Linux-only XDG redirection, derive
the warm-cache probe and data path from SettingsCache, and bail out when the
temporary sandbox cannot be created.
- Run each pass with a fresh worker and shut workers down before reading the
429 counters, so the redirect cache is persisted and no worker thread can
outlive the stack-local counters or the installed message handler.
- Make s_activeCounters atomic and always forward log output when the previous
handler is the built-in (nullptr) one.
- Validate --timeout-min, scale the cached-pass budget with --count, honour the
first --url as the stress template, and add the missing trailing newlines.
- Zero-initialise SettingsCache members so the benchmark mock cannot
dereference an indeterminate pointer.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [PictureLoader] Fix worker thread shutdown and cross-thread cache clearing
clearNetworkCache() ran directly on the UI thread while the worker thread
owned the disk cache and redirect cache, racing cache reads/writes. Make it
a worker-thread slot invoked via a blocking queued call when the thread is
running, so the 'Cached card pictures have been reset.' message is truthful.
The worker thread was also never quit()/wait()ed: both destructors only
deleteLater'd their objects, so Qt warned 'QThread: Destroyed while thread
is still running' and leaked a running loop at exit. Wire the worker's
finished() signal to its own deleteLater() (canonical worker-object
pattern), add shutdownThread() to stop the loop, and let CardPictureLoader
destroy the QThread only after wait() has returned.
* [PictureLoader] Guard cache teardown and stop blocking the UI thread
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [PictureLoader] Add user-configurable per-host request caps
Picture downloads were throttled to a uniform 10 requests/second per host
with no way to tune a specific server. A rate-limited API host (Scryfall
caps at 10 req/s) can trip 429s during bursts, and CDN hosts with no rate
limit were throttled needlessly.
Introduce developer-owned per-host caps that users can only ever lower,
never raise, exposed in the download settings page:
- DownloadSettings::DEVELOPER_HOST_CAPS sets the ceiling per host
(api.scryfall.com 9, cards.scryfall.io unlimited, others 10).
- A new hostRequestLimits setting stores user overrides in downloads.ini;
clampHostRequestLimit() bounds them to [1, devCap] so a user can reduce
api.scryfall.com to 5 but never raise it above 9.
- The picture worker seeds, halves on 429, and recovers its sustained
per-host allowance against the effective ceiling instead of the global
maximum, and skips per-host accounting entirely for unlocked hosts
(cards.scryfall.io) while global pacing and 429 backoff still apply.
- The deck editor settings page gains one spinbox per known host, each
clamped to its developer cap.
* [PictureLoader] Let unlocked hosts skip dispatch pacing; adjust limits per URL
Two refinements to the per-host request caps:
- Unlocked hosts (UNLIMITED_HOST_QUOTA, e.g. cards.scryfall.io) no longer
wait on the 100ms dispatch pacing or consume the global per-second quota.
dispatchQueuedRequest fires their queued requests back-to-back, bounded
only by their 429 backoff window and Qt's per-host connection pool, so
an unthrottled CDN is not artificially slowed.
- The deck editor download settings page replaces the static grid of one
spinbox per known host with an "Adjust Rate Limit" toolbar action on the
URL list. It picks the host out of the selected URL and clamps the entry
against the developer cap table (including for user-added URLs).
Also fixes a review finding: resetRequestQuota could write the
UNLIMITED_HOST_QUOTA sentinel (-1) into the sustained per-host quota when a
host became unlocked mid-run, permanently poisoning its allowance. Stale
entries for unlocked hosts are now dropped, and the per-second seed is
clamped against the effective ceiling so a lowered limit applies immediately.
* [PictureLoader] Cap unlocked host bursts and adapt them to 429s
* [PictureLoader] Store per-host limits readably and show them per URL
* [PictureLoader] Make dispatch and rate-limit bookkeeping key on the real host
Addresses ZeldaZach's round-4 review nits:
- Dispatch now resolves the cached-redirect chain before the in-flight gate,
so a redirect learned after a URL was queued can no longer bypass the
MAX_IN_FLIGHT_PER_HOST cap and drain the whole queue onto the redirect
target, which may carry its own developer cap. processSingleRequest does
the same so the allowance math keys on the host that is actually hit.
- The per-host in-flight slot is released when the reply is destroyed (with
the worker as the connection context) rather than on a 'finished'
connection bound to the work object, so an aborted reply or a work object
deleted while a reply is pending can never permanently shrink the fast
path's concurrency.
- storeSettings only prunes limits for hosts with neither a URL nor a
developer cap, so throttles on redirect targets (api.scryfall.com ->
cards.scryfall.io) survive URL removal.
- Unlocked hosts are offered 0..UNLOCKED_HOST_LIMIT_MAX (50) in the rate
limit dialog, matching clampHostRequestLimit() and the documented
hand-editable range, so values written into downloads.ini are no longer
silently rewritten on the next edit.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [PictureLoader] Seed per-host allowances on demand and skip hosts in 429 backoff
The quota reset re-filled every host's remaining allowance to a full
MAX_REQUESTS_PER_SEC as soon as the queue had a request for it, so a server
that was just rate limited could be hammered again at full speed immediately
after (or even during) recovery.
Only seed a host's allowance the first time it is dispatched in the current
second, seeded from its reduced sustained quota, and skip hosts still inside
their 429 backoff window entirely, handing the entry back to its worker so it
can wait the backoff out or fall through to another source instead of parking
in the queue with no reply pending. Deferrals wait on the host that is
actually blocking the request (cached-redirect targets and the reply host of
a 429) rather than the current card URL's host.
Rebased onto network-requests/request-pacing, which absorbed the earlier
pacing and dispatch-guard commits, and reuses its updateTimerState idle-429
recovery plumbing.
* [PictureLoader] Hand backed-off entries back across the whole dispatch tick
Review fixes on the 429-backoff skip:
- Hand a backed-off queue entry back to its worker via
scheduleDeferredRetry(host) instead of startNextPicDownload(), which was
looping on the pre-redirect host every 100ms tick whenever the queued URL
was a cached-redirect target whose redirect host was the one in backoff.
- Keep scanning the queue after a hand-back (--i; continue) so a backed-off
host at the head no longer consumes the entire dispatch tick, stalling
every healthy host further down.
- Emit imageRequestSucceeded(url) before makeRequest()'s cached-redirect
backoff return so the status bar reclaims the deferred URL's widget instead
of inflating the progress bar forever.
- Only spend a per-second allowance when makeRequest() actually issues a
request: it returns nullptr when the redirect target is backed off and the
work is handed back, so the slot would otherwise be wasted on a no-op.
- Gate the dispatch-time backoff skip on requestTouchesNetwork() so entries
served straight from the disk cache (e.g. with downloads disabled) are not
bounced into a 30-60s deferred retry for a host that 429'd earlier.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [PictureLoader] Pace requests and run the throttle timers on the worker thread
Previously the whole backed-up queue was drained in a burst as soon as a
request was enqueued, sending up to 10 requests back-to-back and then
immediately re-filling the quota one second later. That hard-bursts a
rate-limited API like Scryfall's (10 requests/second) into a 30 second
lockout.
Introduce a pacing timer that dispatches a single queue entry every
100 ms, so the per-second allowance is used smoothly instead of in spikes,
and keep the quota timer at 1 second. Also fix both timers' thread
affinity: they are QTimer value members and so are not QObject children,
meaning moveToThread() on the worker left them on the main thread while
the slot code started them from the picture thread, which was a no-op that
also warned. They are moved to the worker thread explicitly and started
lazily from there.
* [PictureLoader] Guard dispatch timer restarts and drop dead request quota
* [PictureLoader] Reconcile quota-timer lifecycle with idle 429 recovery
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Card] Add a setting for the language used in card search
Localized card names and texts can now be searched too, controlled by a
'Language used in card search' toggle (English, selected card language, or
both) on the general settings page. Untranslated cards always keep matching
in English.
Removed the redundant local copy of the URL templates list in the localized
picture loader while here.
* [Card] Bind search language per FilterString instance
The peg parser rules are set up once per process, so the GenericQuery and
OracleQuery rule actions could not capture per-instance state. Instead of
storing the search language in a process-global that FilterString instance
methods mutate, hand it to the rule actions through a thread-local parse
context and copy it into the filter closures they produce. Card evaluation
in FilterString::check no longer reads any process-global state, and each
instance keeps the language it was built with; constructing one instance no
longer changes what unrelated instances (deck filter, drop-to-hand, zone
views) match against.
The card database display model stores the raw query and rebuilds the
FilterString when the search language changes, since the language is now
bound at parse time.
Add tests for the English/Selected/Both search modes, the English fallback
for untranslated cards, and per-instance language independence.
* [Card] Pass the card search language to deck and zone card searches
Wire the two remaining FilterString consumers to the configured card search
language so card-name matches respect it everywhere:
- DeckFilterString now takes the search language and mode, exposes them to its
[[card name]] rule action via a thread-local parse context (same pattern as
FilterString), and the engine's card database uses them for content search.
- ZoneViewZone reads the card language from CardsDisplaySettings when applying
its search filter, and the reveal-zone widget re-applies the active search
when the language setting changes.
- The deck-storage search re-runs its filter against the current card language
setting, including live re-application when the setting changes.
Game-action targeting (DlgMoveTopCardsUntil) intentionally keeps evaluating
against English card names.
* [Card] Rename CardSearchLanguage to SearchLanguageMode
* [Card] Restore displaced namespace doc in card_localization.h
* [Filters] Pass CardSearchLanguage as a single struct
* [CardSearchModel] Match English and localized names in Both mode
Card names are stored in both English and localized forms, so search for
matches in both during the 'Both' search mode instead of checking only
the localized name.
* [CreateTokenDialog] Fetch cardsDisplay settings inside the apply lambda
Avoid capturing the raw settings pointer in the lambda: resolve the card
language and card search language from the settings cache at call time so
the values are always current when the search language is re-applied.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [PictureLoader] Add local override storage and resolution with matcher tests
* [PictureLoader] Address review comments
- Make deleteAllLocalOverrides static; it does not touch instance state
- Drop the now-unused hasCustomArt dead code
- Rename the override install methods to installPrintingOverride /
installPrintingOverrideOnLoad
* [Tests] Give loader matcher tests a writable HOME in CI
Under GitHub's docker runner the process uid has no passwd entry, so HOME
resolves to '/' and the test-mode qttest data dir cannot be created.
SettingsCache's QSettings then drops every write, getPicsPath() comes back
empty, and the loader searches a blank path. Point HOME at a QTemporaryDir
for the duration of the run.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Client] Show localized card names, texts and pictures
Localization wiring now runs end to end: the oracle importer collects
foreignData for the configured language and the client renders it.
- [Oracle] Import localized names and rules texts for the selected cardLang
- single-face cards store their foreignData name and full text
- multi-face (split/adventure/aftermath/prepare) cards collect the joined
name once and join each face's translated text with the same separator
as the English merge; an incomplete translation falls back to English;
the joined text follows the same highest-priority-set policy as the
single-face path and is only collected when localization is enabled
- the wizard switching languages re-imports the card database
- [Client] Display localized card info throughout the client
- card info text/picture widgets and the game board re-render on language
change
- pictures resolve cardLang art through Scryfall's named endpoint using the
localized name, falling back to id-based art when no match exists
- deck editor keeps canonical English names as card identity (EditRole)
while showing localized names (DisplayRole), so decks and wire names
stay stable
- [Card] Add CardLocalization-backed name/text lookup and cards.xml v4
localization elements with a bounded-size translation cache
- [Tests] Cover oracle foreignData import (incl. multi-face joins, priority
and fallback paths), XML v4 localization parsing, deck model localized
display and the language-aware settings default
Existing installations need to re-run Oracle to see translations: localized
data only lands in cards.xml when the Oracle app is started with the
preferred language selected — launch the separate "Oracle" program that
ships with Cockatrice, pick the language in the wizard and let it re-import
the card database.
The client's database cache (cards.xml.cache) is invalidated by the cache
format bump and the source-hash checks, but a cache written before the
re-import can still hold English-only entries (the hash uses file size and
mtime, so a same-size/same-timestamp rewrite may be served as-is); delete
cards.xml.cache and relaunch if no localized names/texts show up after
re-importing.
* [Card] Pass localized card names and texts into CardInfo construction
Address review: instead of constructing the card and then calling
setLocalizedName/setLocalizedText (which emit a cardInfoChanged signal per
language), both constructors, both newInstance overloads and their callers
(cards.xml v4 parser and the binary cache reader) now pass the localized maps
as constructor arguments.
* [Client] Rename LocalizedCard:: helpers namespace to CardLocalization
The namespace now matches its header file name, as the review pointed out;
LocalizedCard reads more like a class or struct. Callers (card info text
widget, board card name rendering) are updated to match.
* [Client] Drop unused info member from the card info text widget
The CardInfoPtr member was only ever initialized to nullptr and never read;
remove it together with its initializer.
* [PictureLoader] Add the localized picture URL explicitly, not implicitly
Address review: silently prepending the Scryfall named-picture URL to the
download list whenever a non-English card language was active was surprising,
consumed quota per card when it failed, and could grab the wrong (canon) art on
name collisions, with no way to turn it off.
The insert is now opt-in and user-controlled: changing the card language adds
the template to the top of the download URLs once (persisted, documented in the
re-import prompt, and editable/removable in the deck editor settings), while the
picture loader no longer injects it at request time.
* [Card] Show card languages in the same native (English) format as the UI
Address review: the card text & images language dropdown listed bare native
names, some in inconsistent lowercase (e.g. "čeština", "español de España"),
which makes the languages easy to mix up for users that do not read the script
(e.g. 日本語 vs 한국어). It now mirrors the UI language dropdown and always pairs
the native name with its English name (e.g. "Deutsch (German)",
"日本語 (Japanese)"), using the same fixed casing.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
With picture downloads enabled, requests were issued with AlwaysNetwork
cache control, which per Qt never consults the disk cache. A picture that
had already been downloaded was therefore fetched from the network again
on every session start, with the queue bypass letting those re-fetches
skip the rate limit entirely.
Treat the network cache as the intent of the 'Network Cache' storage
method suggests: if the URL is already cached, serve it with AlwaysCache
(no network, no quota); only a genuine miss goes to the network, and only
when downloads are enabled. Cache hits skip the queue for free since they
never consume the per-second request allowance.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Replace remaining QPixmap("theme:...") call sites with themePixmap() so icons, replay controls, card backs, and other images resolve to -dark/-light variants under theme schemes. Stem-exact 1:1 migration; behavior unchanged for non-variant themes.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Settings] Shuffle some settings around
Took 21 minutes
Took 1 hour 25 minutes
* [Settings] Camel case everything
* Revert debug schema change
* Add new classes
* Fix card counters writing to global
* Fix CI tests
* Fix Windows CI
* interface() is a protected keyword for MSVC
Took 5 minutes
Took 5 seconds
* [Settings] Keep menu settings on the appearance settings page
Leave the 'Menu settings' group box on the appearance settings page for
now; relocating it to the user interface settings page will be done in a
separate PR.
Took 6 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Settings] Split cache_settings into multiple files
Took 9 minutes
Took 4 minutes
* [Settings] Fwd declare settings classes in cache_settings
Took 15 minutes
* Fix oracle includes.
Took 8 minutes
* Address comments, fix windows CI
Took 8 minutes
* fix copy constructor visibility
Took 3 minutes
* lint
Took 2 minutes
* Fix native format tests.
Took 5 minutes
* Remove test header guard
Took 4 seconds
* Remove tests invalid in CI environ
Took 24 seconds
* Adjust to rebase.
Took 11 minutes
* Change settings file name.
Took 8 minutes
---------
Co-authored-by: Lukas Brübach <lukas.bruebach@bdosecurity.de>
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [PictureLoader] Allow saving downloaded images to local storage and not just the QNetworkManager cache.
Took 1 hour 11 minutes
Took 4 seconds
Took 25 seconds
* Give people options from a dropdown.
Took 1 hour 6 minutes
Took 3 seconds
* Simplify directory removal code.
Took 5 minutes
Took 8 seconds
* Merge pull request #8
* Create new category for new settings
* Split off storage settings
Took 47 minutes
Took 4 seconds
* Allow toggling between caching methods.
Took 1 hour 30 minutes
Took 9 seconds
* Adjust settings dialog.
Took 5 minutes
Took 59 seconds
Took 22 seconds
Took 6 seconds
* tr() strings
Took 1 minute
Took 6 seconds
* Readjust layout, default naming scheme.
Took 5 minutes
* Add stretch.
Took 9 minutes
* Make scrollable.
Took 2 minutes
* Add icon.
Took 7 minutes
* Change naming to be uniform.
Took 3 minutes
Took 3 seconds
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Co-authored-by: RickyRister <42636155+RickyRister@users.noreply.github.com>
* style: Add braces to all control flow statements
Standardize code style by adding explicit braces to all single-statement
control flow blocks (if, else, for, while) across the entire codebase.
Also documents the InsertBraces clang-format option (requires v15+) for
future automated enforcement.
* InsertBraces-check-enabled
* [NetworkManager] Set Version string as user agent
Took 13 minutes
* Update in oracle.
Took 14 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Cleanup] Unused #includes
Took 44 minutes
* [Cleanup] More unused #includes
Took 55 minutes
* [Cleanup] Include QSet
Took 4 minutes
* [Cleanup] Include QDebug in deck_list.cpp
Took 3 minutes
* [Cleanup] Include protocol stuff in servatrice_database_interface.h
Took 3 minutes
* [Cleanup] Include QDialogButtonBox
Took 8 minutes
* [Cleanup] Include QUrl
Took 8 minutes
* [Cleanup] Include QTextOption in header.
Took 3 minutes
* [Cleanup] Include QMap in user_list_manager.h
Took 8 minutes
* [Cleanup] Adjust qjson
Took 8 minutes
* [Cleanup] include button box.
Took 3 minutes
* [Cleanup] Redo fwd declarations.
* [Cleanup] Redo last removed fwd declarations.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Fix local variable double declaration.
Took 44 seconds
* Mark functions as [[nodiscard]]
Took 31 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Doxygen] Card Picture Loader
Took 25 minutes
Took 16 minutes
# Commit time for manual adjustment:
# Took 12 seconds
Took 14 seconds
* Remove placeholder file description.
Took 1 minute
* ... but do group PictureLoader again
Took 28 seconds
* Link to methods directly.
Took 6 minutes
* Forward declaration.
Took 49 seconds
* Remove redundant .cpp function documentation.
Took 15 minutes
* More fixes.
Took 7 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Fix crash on rejoining game when reconnecting.
Took 2 minutes
Took 13 minutes
* Proper lib include.
Took 1 minute
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Have CardDatabase::getPreferredPrintingInfo respect card provider ID overrides (pinned printings)
Took 13 minutes
Took 37 seconds
Took 10 seconds
Took 10 seconds
# Commit time for manual adjustment:
# Took 30 seconds
Took 15 seconds
Took 8 minutes
Took 21 seconds
* Move settings cache and settings card preference provider out of libcockatrice_settings and into cockatrice
Took 52 minutes
Took 9 minutes
Took 1 minute
* Temp cache.
Took 16 minutes
* Dependency Injection for SettingsCache
* Turn SettingsCache into a QSharedPointer.
* Implement interfaces for settings that need it
Took 2 hours 38 minutes
* Adjust oracle.
Took 5 minutes
* Move abstract/noop interfaces to libcockatrice_interfaces so they can be linked against independently.
Took 52 minutes
* Clean up some links.
Took 3 minutes
* Cleanup two includes.
Took 3 minutes
* More fixes.
Took 7 minutes
* More includes that slipped past.
Took 3 minutes
* Stop mocking and start injecting for tests.
Took 15 minutes
* I don't know why remote_client was including main.
Took 4 minutes
* Include.
Took 3 minutes
* Lint.
Took 2 minutes
* Don't use Qt pointers.
Took 1 hour 7 minutes
* Make parser use CardSettingsInterface
Took 13 minutes
* Also adjust constructor lol.
Took 8 minutes
* Lint.
Took 32 minutes
* Revert "Lint."
This reverts commit ecb596c39e.
Took 3 minutes
* Test.
Took 3 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
