121 commits

Author	SHA1	Message	Date
sentry[bot]	30d3afc7b4	[Updater] Close a running Cockatrice when the installer asks (#7672) ... * [Updater] Refuse a close that arrives while one is already asking MainWindow::closeEvent() had a re-entrancy guard that returned without touching the event. A QCloseEvent is accepted unless something ignores it, so a second close request - an installer replacing our files posts one every 30 s - accepted the close while the first one was still blocked on its own confirmation. close() then hid this window, hid the confirmation dialog with it, and left the process running inside the nested loop that dialog had opened: no window, no way to answer it, and every later close request accepted into the same dead end. That is what an update looked like when it could not close a running client, and it is why the installer could name the process, bring it forward and ask it to close for minutes without anything happening. Track how far the shutdown has got instead. While a confirmation is up, a close from anywhere else is refused, which leaves the question in front of the user; once the shutdown has been accepted, a duplicate close (Qt delivers the event twice on some platforms) is accepted again so it cannot cancel the quit. * [Installer] Leave an instance that is asking a question alone An instance that answered a close by hiding rather than quitting - the state the client used to get into - has no visible window left, and the confirmation it is waiting on is hidden with the window that owns it. The close probe only ever looked at visible windows, so it restored the main window, posted WM_CLOSE into the same dead end, and reported "still running" without saying why. Show every window the instance left hidden before choosing the one to close, and skip the close when the window it would reach is disabled: a modal dialog of the instance's own is up, and posting the close then only hides the question again. Name what is left of the window in the report as well - gone, still open, hidden again, and whether the thread answers at all - so the log tells a refused close from one that was never delivered. * [Installer] Offer to end a Cockatrice that will not close A close is a request, and an instance that does not answer it - waiting on a question nobody is looking at, or stuck where a close cannot reach - leaves the user with no way forward: the files cannot be replaced while it runs, and clicking Yes again only repeats the request. After a second close that changed nothing, offer the only thing that can free the files: end it. The prompt says what it costs - an unsaved deck, a running game or a setting it has not written yet - the default button is the safe one, and it is a separate answer rather than a relabelled "Yes", so it is not reached by clicking through the close prompt. Only cockatrice.exe is ever ended: Oracle writes the card database in place and Servatrice is a service, so both are named and left to the user, exactly as they are for the close. The probe gains an --end-holders mode for it, and the uninstaller's guard gets the same offer. * [Installer] Never name the process that is doing the asking The old uninstaller is started with _?= so it runs in place, from the very directory it is emptying, and an installer can be downloaded into the folder it installs to. Both are then processes running from the directory, so the probe named them - and the guard asked the user to close the program that was asking. That question cannot be answered: a close and the end offer both skip anything that is not cockatrice.exe, so the guard repeated itself until the update or the uninstall was cancelled. The probe and the processes that started it are now never named, by either lookup. The walk up the parent chain stops at the first program the payload installs, because in an in-app update the installer's own parent is the Cockatrice instance being replaced - the one the guard exists to name. The Windows check held its locked file in the script that starts the probe, so that holder is excluded by design now and the check read it as "nothing found". It holds the file from a process of its own instead, and asserts the exclusion itself: a file that only the asking process holds comes back as nothing. * [Installer] Restore only the windows a user could answer Showing every hidden window an instance owns put Qt's own bookkeeping windows on screen: the tray icon keeps one to receive the TaskbarCreated message, styled WS_OVERLAPPED and titled QTrayIconMessageWindow. Restored, it is an empty white rectangle in the taskbar with no title bar to close it - it has no window procedure that would hide it again, and the process is busy in the very loop the restore is meant to break, so it stayed until the process was force-ended. Only framed, non-empty windows are restored and considered for the close now. That also keeps the close off Qt's tray window, which answers WM_CLOSE by asking the application to terminate - a quit that skips the confirmation the close is supposed to reach. * [Installer] Uninstall the previous version before installing over it A regular install over an existing one asked "a previous version must be uninstalled", then ran the old uninstaller interactively. That uninstaller put its confirmation page behind the installer window, where it could not be answered, and it only removed the installation after the installer had already written the new one over it. Run the previous version's uninstaller silently instead. The installer has already asked the question the user answered, so a second, hidden confirmation is pure risk: with /S there is no window to be behind, and ExecWait is then waiting for something that cannot outlive it. QuietUninstallString is used when the old installation has one, otherwise /S is appended. ExecWait only waits while the uninstaller runs in place: one that did not get a usable _?= copies itself to %TEMP% and returns at once, while the copy keeps deleting - which is how an uninstall can finish after the install it was supposed to precede. Log the exit code and wait for the old cockatrice.exe to disappear before restoring user data or writing anything, and abort with a message instead of installing into a directory that is still being emptied. Cancelling the "must be uninstalled" prompt now quits the installer; it used to skip the page and install over the old version anyway. * [Installer] Do not show windows the application has hidden The guard restored every hidden window an instance owned before asking it to close, so that a confirmation hidden together with its window would come back. Windows does as it is told and shows them; the application does not, because Qt still believes they are hidden and never paints them. What the user gets is a blank white rectangle, on screen and on the taskbar, that answers nothing - and the question it was meant to bring back is not answerable in it either. An instance with no window a user could answer is named and left to the user instead, and the prompt says what to do about it: open it from the notification area. Ending it stays the last resort, offered once a close has been asked for twice. The abort after a failed uninstall now says what it saw - the old version is still there after its uninstaller ran - instead of promising a removal that is not happening, which is the state a cancelled old uninstaller leaves behind. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-27 11:19:49 +01:00
sentry[bot]	d42b9607c5	[Installer] Check for running instances with the Restart Manager probe (#7671) ... * [Installer] Check for running instances with the Restart Manager probe The running-instance guard was built on powershell.exe started from the 32-bit NSIS stub, which is the 32-bit Windows PowerShell: its Get-Process cannot read the path of a 64-bit process, so a running 64-bit Cockatrice was reported as not running, the update went ahead, and the purge then failed on the DLLs that instance still had mapped. Use tools/installer-holder-probe instead - the same Restart Manager lookup the abort path already had - before anything is replaced and in the uninstaller as well. It is bitness-agnostic, so the Sysnative and WMI fallbacks are gone. The guard looks only at the payload, asks Cockatrice to close once by itself (WM_CLOSE, the same request as the window's close button) and then offers close again / retry after closing by hand / cancel for whatever the close cannot reach - Oracle writes the card database in place, Servatrice has no window - without force-stopping anything. A failed purge offers the same close-and-retry, tries one last purge when nobody is named, and every dialog shows in every mode: a silent reinstall stays silent until something goes wrong. * [Installer] Name processes running from the install directory The running-instance guard answers from the Restart Manager, which reports who has a file open. A running instance does not have to have one open: its own image and the modules it loaded are mapped into it rather than opened by it, and a mapping is not reliably reported. That is the state the probe was added for - every DLL still on disk, an instance running from the directory, and "nothing is holding them any more" as the answer. A guard built on file handles alone is blind to exactly that instance, so it passes, the purge fails, the holder lookup after it names nobody either, and the install ends in a warning that no running program was found: no close is attempted and no retry is offered. A manual install with another instance open never asks it to close at all. Name every process whose image lives in the directory being replaced as well, with the same bitness-safe QueryFullProcessImageNameW the probe already uses to label its holders. The image lookup is listed first - it is the instance the user is asked to close - and the Restart Manager entries follow with the pids already named dropped, so the close still reaches everything that holds a file. A Restart Manager call that fails only makes the probe unable to answer when the image lookup named nobody either. Ask instead of dead-ending when the probe cannot answer at all: Retry checks again, Ignore carries on, Abort cancels, in the installer and the uninstaller alike, and the abort dialog says the check failed instead of claiming no running program was found. The Windows CI probe check covers the new lookup with a process started from the directory that holds no file open. * [Installer] Offer to wait again when the launcher has not exited A client that is still closing after 60 s is usually not hung: it is showing its own "quit anyway?" confirmation for an unsaved deck, an open game or a card database update, and the user is the one who has to answer it. The installer answered that with a plain warning and stopped, so the only way forward was to close Cockatrice by hand and run the update again - which on an in-app update means finding the downloaded installer. Ask instead: Retry brings the client to the front, asks it to close again (WM_CLOSE, nothing forced) and keeps waiting on its handle, Cancel stops as before. There is no "install anyway" answer because a live process has its image and Qt DLLs mapped, so writing the payload over them is the broken install this wait exists to prevent - and the guard that runs right after names the same process by its image path and stops there, so ignoring would only move the same question a moment later. * [Installer] Ask about a launcher that has not exited after ten seconds A minute of silence is a long time to sit in front of an installer that has no window yet, and the case it is waiting for is not a slow flush: a client that started an update exits in well under a second, so a minute means it is almost always showing its own "quit anyway?" confirmation with nobody looking at it. Wait ten seconds for the first question instead, and the full grace for the ones after it. The normal path is untouched - WaitForSingleObject returns as soon as the handle signals, so a client that exits in 200 ms still costs 200 ms - and answering the first question once does not turn into a stream of prompts while the user is in Cockatrice's window. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-26 19:25:10 +01:00
sentry[bot]	4793c1fc04	[Installer] Offer to close blocking processes and retry purge on upgrade (#7664) ... * [Installer] Offer to close blocking processes and retry purge on upgrade * [Installer] Retry the purge after closing only our own applications The first version of this fix closed every Restart Manager holder through RmShutdown, forcing what refused to close. RmShutdown also stops services, and the only API that brings them back is RmRestart, which would restart Cockatrice itself into the files that are about to be replaced; the forced pass also contradicts the running-instance guard, which never force-closes Cockatrice because it may be holding an unsaved deck. The guard ran first anyway, so for the case the fix exists for - a Cockatrice restarted during the update - the probe never got to run: the guard waited 60 s and aborted. Keep the prompt and the retry, but ask only Cockatrice, Oracle and Servatrice to close, with WM_CLOSE and nothing else, and leave every other holder named by the probe to the user. Repeat the prompt while the user keeps saying Yes, refresh the names after a failed retry, and keep the /R abort message pointing at the downloaded installer. Also clear the read-only attribute before every purge attempt. Delete and RMDir leave such a file in place, so the retry could never make progress, and the diagnostics branch that named the cause had no action behind it. The holder probe goes back to being diagnostic-only, so its Restart Manager code and the --close argument are dropped. * [Installer] Make an accepted close of the running client actually land WM_CLOSE is a request, and Cockatrice answers it: while a card database update is running, a game is open or a deck is unsaved it puts up its own "are you sure?" confirmation. That dialog opened behind the installer's prompt, so the user saw nothing happen; the next Yes was posted to a main window the app's own modal dialog had disabled, so it was ignored as well, and the identical yes/no prompt came back with no hint of why. - Activate the matching window before posting WM_CLOSE, so the app's own confirmation is in front where it can be answered. - Wait up to 30 s for cockatrice.exe to exit instead of purging after a fixed 2 s, so the purge measures the app gone rather than its dialog. - On the second and later rounds ask with Retry/Cancel and say what is needed, instead of repeating the same offer that just did nothing. - Stop promising Oracle and Servatrice: they are console applications, so CloseMainWindow() has nothing to send WM_CLOSE to. They are not force-stopped either - Oracle writes the card database in place. * [Installer] Close the client from the holder probe, not PowerShell Accepting the offer to close did nothing on a real machine: the instance stayed up, never came forward, and the same prompt came back. The prompt names its holders from the Restart Manager probe, but the close itself went through powershell.exe: Get-Process -Name, a strict "path starts with $INSTDIR" filter, then Process.CloseMainWindow() and a WScript.Shell AppActivate. Every step of that is silent. A process whose path cannot be read is filtered out, a process .NET finds no main window for makes CloseMainWindow() return false without posting anything, and AppActivate is refused for a background caller - so an attempted close, a missed close and a close request the client ignored all looked the same in the log: nothing. Ask the probe instead. installer-holder-probe --close-holders closes exactly the processes Restart Manager just named as holding a file of the version being replaced, so no executable path has to be guessed and a third party application that merely shares the image name is never in the set. Per instance it restores and brings the top-level window forward (AttachThreadInput, so the client's own "really quit?" confirmation is on screen rather than behind the installer), posts WM_CLOSE to the main window, and waits up to 30 s for the process to exit. Its report names every holder with what happened to it, including the ones left to the user, and goes into the installer log as one line. That also removes the separate PowerShell polling loop that used to wait for the close: the probe holds a handle on the process it asked, so the purge that follows measures a settled directory. Oracle and Servatrice are still never closed, and nothing is force-stopped. --------- Co-authored-by: sentry[bot] <39604003+sentry[bot]@users.noreply.github.com> Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-26 09:45:52 +01:00
sentry[bot]	858b270fa9	[Installer] Retry locked DLL purge before aborting upgrade (#7657) ... * [Installer] Retry locked DLL purge before aborting upgrade * [Installer] Keep the purge verdict when the portable purge runs $IsUpgrade was read from IsExistingCockatriceInstall after the portable purge, which deletes the very markers that function looks for. A purge whose only survivors were non-Qt DLLs (abseil_dll.dll, libssl-3-x64.dll) or content under Plugins therefore reported "not an install", $IsUpgrade became 0 and the abort was skipped - the mixed DLL set the retry exists to prevent. Measure the directory before either purge block, where it still describes the directory as it arrived, and let RetryDllPurge's own verdict decide the abort. A portable install into a directory without portable.dat is neither purge block, so $StaleRuntimeAfterPurge was never assigned there and the abort could not fire either. Track whether a purge ran and measure that directory with HasStaleRuntimeFiles instead, which is what every upgrade did before the retry. --------- Co-authored-by: sentry[bot] <39604003+sentry[bot]@users.noreply.github.com> Co-authored-by: BruebachL <44814898+BruebachL@users.noreply.github.com> Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-25 20:40:57 +01:00
BruebachL	bbc6003f0a	[CrashReporting] Name the files and processes behind a failed installer purge (#7590) ... * [CrashReporting] Log which files and processes blocked the installer purge A purge that fails aborts the upgrade with a message that can only guess at the cause, and the log only listed which DLLs survived. Record what Windows reports for each survivor and which processes still have the install directory mapped, then repeat the holder list in the abort message. The diagnostics are additive and run only on the abort path: they open each survivor for DELETE access and close it again without deleting, so a failed upgrade can never end up half-removed. The purge itself is unchanged. * [CrashReporting] Name the holders of a failed purge with Restart Manager The process-and-module scan could only name a holder whose image lives in the install directory or that loaded one of its DLLs, so the case this diagnostic exists for - an antivirus scanner holding a plain handle - was reported as "no holder named, only a code". Reaching the Restart Manager from the NSIS script would have meant marshalling RM_PROCESS_INFO through System::Call as a table of hand-computed offsets, which cannot be checked without a Windows toolchain, and that is why it was dropped when this diagnostics was written. Move the call into tools/installer-holder-probe: a small executable the same Windows build compiles, linking nothing from this project so it still starts when the installed runtime is what the purge could not replace. It rides inside the installer and is extracted to $PLUGINSDIR only when the purge has already failed, so the successful path is unchanged and nothing new is installed. .ci/compile.sh runs it against a file held with FileShare.None on the Windows runners, so the lookup is exercised on real Windows instead of only compiled. * [CrashReporting] Fix the holder probe check and cap the holder line The probe block ran after the package steps, where the working directory is already the build dir, so its $BUILD_DIR-prefixed paths named build/build and the PowerShell file could not be written. Move it ahead of install/package, where the build dir is still the cwd, and name both files relative to it. Guard it on MAKE_NO_CLIENT, since the probe is only built with the client. Cap the rendered holder line at HOLDER_LINE_CHAR_MAX: the count limit alone does not keep long service names inside the NSIS string that also carries the abort text and the log path. Whole entries are kept and the rest counted, with the first holder always shown. Also run cmake-format on the probe's CMakeLists so the lint job accepts it. * [CrashReporting] Report a read-only purge survivor and bound the probe check --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 00:46:54 +02:00
BruebachL	c6f682f9cf	[CrashReporting] Offer to send the installer log on abort (#7524) ... * [CrashReporting] Installer log send offer on abort (inc 4) DSN parsed to CPACK_SENTRY_* (scheme-aware for http self-hosts) before include(CPack); new SendInstallerLog.ps1.in builds a byte-accurate Sentry envelope (128 KiB tail cap, X-Sentry-Auth, exit 0/1) with the abort reason read from the log file itself, so the NSIS side needs no string functions and quoting stays trivial. AbortInstall asks consent (attended installs only, silent path untouched, abort never swallowed). Empty/malformed DSN disables the offer; no secrets in repo. * [CrashReporting] Embed installer-log sender via a relative NSIS path The AbortInstall hook embedded SendInstallerLog.ps1 through the absolute CPACK_SENTRY_PS1_PATH, which carries CMake's forward slashes (D:/a/...). makensis does not treat a forward-slash drive path as absolute, so it resolved it relative to project.nsi, found nothing and aborted packaging on the Windows jobs of every branch in the stack. Embed it with the same '..\..\..\' relative path that already resolves NSIS.definitions.nsh: both are configure_file'd into the build root, three levels up from where CPack places project.nsi. Drop the now-unused CPACK_SENTRY_PS1_PATH cache variable. * [CrashReporting] Drop the installer /CRASHTEST hook, tidy the log sender Remove the /CRASHTEST switch and the matching COCKATRICE_SENTRY_DSN environment override on the installer abort path. With no deliberate in-installer trigger left, a package built without a baked DSN must never offer to post a user's log to an endpoint chosen by whatever happens to be in the environment, so the prompt is now gated on CPACK_SENTRY_ENABLED alone. This also retires the comment that claimed /S /R /CRASHTEST reaches the prompt: the switch was evaluated before /R set ReinstallMode, so that form never showed it. Alongside: correct the CPACK_SENTRY_RELEASE comment (PROJECT_VERSION keeps its "-<label>" on Development tags where CPACK_PACKAGE_VERSION does not), delete the unused CPACK_SENTRY_HOST/CPACK_SENTRY_PROJECT_ID cache vars, document the DSN regex's path-prefix fallback, log a declined send, keep the uploaded installer log free of helper-injected newlines, and bound the post with -TimeoutSec/-NonInteractive. * [CrashReporting] Derive the installer DSN vars as plain variables Review nit: every CPACK_SENTRY_* value is recomputed from COCKATRICE_SENTRY_DSN on each configure, so CACHE ... FORCE bought nothing. Set empty defaults once, override them in the match branch, and drop the duplicated else() copies. Still CPACK_-prefixed, so include(CPack) still snapshots them into CPackConfig.cmake. * [CrashReporting] Gate the installer log send at build time Review nit: test CPACK_SENTRY_ENABLED with the NSIS preprocessor instead of copying it into $SentryEnabled and branching at runtime, so a package built without a DSN compiles the prompt out rather than carrying dead code. The configure_file that produces the helper is gated the same way, so a build without reporting neither references nor embeds it. * [CrashReporting] Disclose the Windows user name in the send prompt Review nit: say that the log can include the Windows user name (a real part of what gets uploaded) and drop the "No account needed." clause, which answered a question the prompt never raised. * [CrashReporting] Show progress while the installer log is sent Review nit: DetailPrint a line before nsExec runs, so the details pane says something while the send is in flight instead of staying blank for up to the 60 s /TIMEOUT. * [CrashReporting] Rename the Sentry event local in the installer helper Review nit: $Event is a PowerShell automatic variable, so name the local $sentryEvent instead. Also drop $firstLine: Select-String returns the matching line alone, so the reason is already one physical line and the extra split added nothing. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-19 14:57:04 +02:00
BruebachL	9f59f5c495	[CrashReporting] Breakpad capture, session detection and symbol upload (#7523) ... * [CrashReporting] Breakpad everywhere, session detection, symbol CI (inc 3) Breakpad on all platforms (no crashpad packaging); remove the Windows MiniDumpWithFullMemory filter and the installer WER LocalDumps full-dump registration. QLockFile per-process session tracking replaces the Windows-only .dmp scan, placed after parser.process and the instance hand-off so help/version exits and handed-off secondaries never leak a lock. CI: Release-only DSN bake from SENTRY_DSN secret, tag-only sentry-cli symbol upload (org cockatrice, project native). Tests: 533/533 ctest green, format clean, code gate PASS. * [CrashReporting] Enable http_retry, harden symbol upload, fix NSIS context Sets sentry_options_set_http_retry so the cache_keep-held crash envelope in Ask mode is written with a retry filename and actually flushes on giveConsent() instead of sitting in <db>/cache until pruning. Adds continue-on-error to both sentry-cli install steps so a Sentry registry outage or broken Git Bash install cannot block release assets. Cleans the legacy WER CrashDumps folder under SetShellVarContext current (under all it resolves to ProgramData, not the user's AppData) in installer and uninstaller; registry delete works in either context. * [CrashReporting] Extract the startup crash-report flow from main() per review * [CrashReporting] Break up the CrashReporter class doc per review * [CrashReporting] Drop the invalid --release from the symbol upload `debug-files upload` never accepted `--release` (checked against the pinned sentry-cli 3.8.0: the subcommand declares --org/--project and a set of type/id/scan options, and execute() reads no release; the only global flags are --url/--header/--auth-token/--log-level/--quiet/--allow-failure). Clap rejects the unknown flag before any upload happens, so every tag build has been shipping without symbols, with continue-on-error keeping the release pipeline green. Release association is also the wrong mechanism: debug information files are matched to events by debug ID via the event's debug_meta. The Sentry release of a native event comes from the event itself (COCKATRICE_SENTRY_RELEASE), not from the DIF upload. Remove the flag and the now-unused SENTRY_RELEASE env from both invocations (Linux, and Windows/macOS). The symbol upload stays continue-on-error (a Sentry outage must not block the release assets); revisit once it has proven itself on a tag. * [CrashReporting] Split debug information out of packaged release binaries -g is required so the CI symbol upload has DWARF to send, but it was left in the shipped binaries too: the Linux Release client is 563 MiB, 552 MiB of it debug info, and every distribution channel pays for that. Keep the build tree unchanged (CI uploads symbols from build/) and strip only the packaged copy. A CPack pre-build script extracts each ELF's debug info to COCKATRICE_DEBUG_SYMBOL_DIR and then runs `strip --strip-debug --strip-unneeded`. .eh_frame is allocatable and survives, so unwinding is unaffected, and the build ID is identical in the stripped binary and the sidecar. Measured on a local Release build (GCC -O2 -g, WITH_CRASH_REPORTING=ON), bytes: binary build tree packaged before packaged after .debug sidecar cockatrice 590,722,560 590,722,560 28,086,480 579,623,576 oracle 53,432,608 53,432,608 1,649,888 52,075,344 tar.gz of both trees: 289,964,521 -> 19,018,058 (~15x smaller). Only ELF (Linux/BSD) is handled: Windows already links /DEBUG with separate PDBs, and macOS extracts a dSYM from the bundle. Opt-out via COCKATRICE_SPLIT_DEBUG_SYMBOLS; skipped with a warning when objcopy/strip are missing. CPACK_PRE_BUILD_SCRIPTS (not CPACK_INSTALL_SCRIPTS, which runs before staging) invokes it, and the script refuses to run unless CPACK_TEMPORARY_DIRECTORY is a real CPack staging tree so a missing variable can never turn its glob into a filesystem-wide walk. * [CrashReporting] Upload Windows PDBs from where Ninja actually puts them The Windows branch of the symbol upload looked in build/<target>/Release, which is the Visual Studio generator's layout. The Windows leg uses Ninja, which is single-config: linker PDBs land in build/<target>/, next to the binaries — the same paths the "[Windows] Upload PDBs" artifact step below globs with if-no-files-found: error. So paths was always empty on Windows, the step printed "No symbol paths found, skipping symbol upload" and exited 0: a silent no-op behind continue-on-error. Every Windows build would then report "A required debug information file was missing" for cockatrice.exe with a PDB-style debug id (GUID-age), exactly as if no upload step existed at all. Use the artifact step's globs. Also turn the empty-path case into a failure in both symbol steps: a silent skip is indistinguishable from a successful upload (which is how the wrong path went unnoticed), and continue-on-error already keeps a broken upload from failing the release. Verified by extracting both steps' run blocks and executing the Windows branch against a Ninja-style tree: it now passes the three linker PDBs to sentry-cli (and not the CMakeFiles/*.pdb intermediates), and exits non-zero with an ::error:: annotation when there is nothing to upload. * [CrashReporting] Archive PDBs on tag builds so a failed upload is recoverable The "[Windows] Upload PDBs" artifact step skipped tag builds (github.ref_type != 'tag'), so for a release the symbols existed only inside the Sentry upload — which is continue-on-error. A failed upload therefore lost the ability to symbolicate that release permanently: no rebuild produces the same PDB, since the debug id is a per-build GUID+age. That is how every Windows crash reported so far became unreadable. Archive the PDBs for tag builds as well, and order the step after "Upload to release" so a missing PDB can never block a release from being published. Retention stays at the repository default; nothing consumes the artifact automatically, it is the manual recovery path (gh run download <run> -n <name>-PDBs, then sentry-cli debug-files upload). Verified by re-parsing the workflow and asserting the step order (release -> PDBs -> attest) and the broadened condition. * [CrashReporting] Upload the Windows executables with their PDBs Sentry needs two things per image on Windows: symbolication and stack unwinding. The PDB covers symbolication, but for a 64-bit PE the Call Frame Information (.pdata/.xdata) lives in the executable and is not copied into the PDB, so uploading PDBs alone leaves the image at "Stack Unwinding: Missing". That is exactly what the event's Images panel showed for cockatrice.exe, while Sentry's own Microsoft symbol server resolved KERNELBASE.dll and ucrtbase.dll from the same dump. sentry-cli also needs the pair in the same invocation: only then does it associate the PE's code identifier with the PDB's debug identifier, otherwise "the identifiers diverge and Sentry might not be able to resolve the correct file for symbolication" (docs: Debug Identifiers). Do the same for macOS, where the dSYM carries the debug information but the Mach-O carries the unwind information, and include the executables in the symbol artifact so a re-upload still has the pair to offer. Verified by extracting the step and running both branches against stub harnesses: Windows passes the three exe/pdb pairs in a single sentry-cli invocation and still fails loudly on an empty tree; macOS passes the dSYM and the Mach-O together. * [CrashReporting] Upload the shipped Qt runtime DLLs too Qt ships no PDBs with its MSVC SDK, so every Qt frame in a crash report resolved to nothing: an image with neither PDB nor PE has no unwind information (on 64-bit Windows the Call Frame Information lives in the PE and is not copied into the PDB) and no symbol source to fall back on. The list is required-runtime.txt, the manifest .ci/compile.sh already asserts the installer against, so what gets uploaded is exactly what an install carries. Qt frames now get unwinding plus export-table names; line numbers still need Qt's debug information files, which the SDK omits. The guards are not cosmetic: the step runs under `bash -eo pipefail`, where a sed over a missing file or an unmatched ls glob aborts the whole step, and continue-on-error makes that look identical to a successful upload. * [CrashReporting] Upload only the binaries, archive symbols only on tags The Linux leg handed sentry-cli whole build directories: 471 candidate files, of which 7 were object files that can never match a stack frame. Only the three linked binaries carry the build-ids Sentry looks up; the packaged copy is split and stripped but keeps that same build-id. The Windows symbol archive ran on every packaging build even though only tag builds upload to Sentry, so a PR build paid for an artifact nothing could ever consume. Tags keep it as the durable copy for a failed upload. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-19 14:57:04 +02:00
BruebachL	ad0fd2d4b0	[CrashReporting] Sentry send path with consent gating (#7522) ... * [CrashReporting] Real send path with consent gating (DSN still placeholder) require_user_consent + give/revoke around the Ask dialog, message event with in-memory crash-log.txt bytes attachment, before_send scrubs message/logentry/breadcrumbs/data of cockatrice:// secrets. Failure box offers Save (shows path) / Discard (revokes + rejects) / Cancel (back to dialog); reject() override so X/Escape cannot bypass revocation; silent AlwaysSend path falls back to a local file. Empty DSN keeps the previous mock behavior byte-identical. Tests: 528/528 ctest green, format clean, code + UI gates PASS. * [CrashReporting] Attach crash log and user note to the pending crash event The redacted log used to ride a separate message event from the native crash (minidump + stack), forcing manual correlation in Sentry. Fold it into the pending crash envelope(s) instead by appending well-formed attachment items before consent releases them: sentry-native replays cached envelopes byte-for-byte (raw read, raw serialize in 0.17.3), so the appended crash-log.txt and user-note.txt items upload with the very event that already carries the dump and stack. Covers both storage locations: Ask mode's consent-held files in <database>/cache and AlwaysSend's transport-dumped files in <database>/<run>.run, which must be attached before sentry_init replays them. When no pending crash event exists (unclean exit without a native crash) the standalone message event remains as fallback, now also carrying the optional note. The dialog gains an optional free-text field ('Here's what I was doing...') that travels as user-note.txt; the mock JSON records it too. * [CrashReporting] Send PROJECT_VERSION as the Sentry release main() reported VERSION_STRING (PROJECT_VERSION_FRIENDLY) as the Sentry release — that carries a build date, so every build of the same version landed in its own release, and it never matched the installer, which reports CPACK/PROJECT_VERSION. Bake COCKATRICE_SENTRY_RELEASE= PROJECT_VERSION instead: date-free, identical between client and installer, and derived from the git tag on tag builds, so events, symbol uploads and the installer log all group under one release. * [CrashReporting] Friendlier crash dialog copy Reword the report dialog along a single friendly arc: headline ('Oops, we crashed — and now we need your help to make Cockatrice better!'), why helping is easy, exactly what gets collected (crash dump with stack trace, app version, OS info, redacted log excerpt), the value of each report ('better and less crashy for everyone'), and the consent choice ('Send and remember makes this automatic without interruption in the future'). The checkbox itself stays direction-neutral ('Remember my choice') because it also persists a 'Don't send' decision. * [CrashReporting] Log where crash reports go and warn when they cannot The client resolved COCKATRICE_SENTRY_DSN (environment over the baked-in value) without ever saying which one won, and sentry-native refuses to build a request for a DSN it considers invalid without reporting anything, so a tester pointing the client at a scratch project had nothing to go on when a crash never appeared. Say which DSN source won, and log the destination (host and project id, never the key) once the SDK is armed. Warn instead of staying quiet when no DSN is configured at all, when a DSN is malformed - disabling reporting rather than silently falling back to the project baked into the build, which is the rule the installer already follows in cmake/CrashReporting.cmake - and when the build was compiled without Sentry support. A deliberate Never-send stays at info level: that is a choice, not a misconfiguration. Also warn when a pending crash envelope was captured for a different destination than the session that will upload it. sentry-native posts every envelope with the DSN held in the transport state of the session doing the sending, and envelopes restored from disk are raw, so the "dsn" header of a cached envelope is never read: a crash captured for one project can be uploaded to another with nothing in the log to show it. Tests cover the DSN shape check (same unanchored pattern the build matches, so a DSN this build accepted is never rejected here), destination description without the key, and the mismatch detection, which stays quiet for a different key on the same project, unreadable files, and headers without a dsn. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-19 14:57:03 +02:00
BruebachL	6385f3fab3	[CrashReporting] Mock crash-report dialog and reporting preference (#7521) ... * [CrashReporting] Mock dialog, sentry skeleton and CI prerequisites Mock: DlgCrashReport preview dialog (no account needed, redacted log preview), CrashReportingMode Ask/Always/Never setting in DebugSettings, --simulate-crash flag and Help-menu preview entry. Send writes a local mock JSON only. Vendor sentry-native 0.17.3 via FetchContent behind WITH_CRASH_REPORTING (breakpad everywhere, backend none under sanitizers) plus a CrashReporter facade with early init and post-loop shutdown. DSN is a placeholder: empty CMake default with COCKATRICE_SENTRY_DSN env override, so SDK init is skipped and mock behavior is unchanged until a real DSN is configured. CI prerequisites riding here so every layer below builds green: libcurl dev plus CA bundles in the Linux images and CodeQL env, sentry Qt integration off (its own find_package cannot see the macOS thin Qt layout), and the StrFunc Using construction makensis requires. Tests: ctest green, format clean, code plus UI gates PASS. * [CrashReporting] Forward mode changes to SDK and fix Linux CI opt-in Connects PersonalSettings::crashReportingModeChanged to giveConsent()/revokeConsent() so switching from AlwaysSend to NeverSend (or Ask) mid-session reaches the SDK instead of leaving consent given until restart. Forwards WITH_CRASH_REPORTING into the docker container the way CCACHE_DIR is, so the Linux package leg actually builds with crash reporting ON instead of silently building OFF. * [CrashReporting] Give crash-report logging its own category per review * [CrashReporting] Drop unused DebugSettings constructor visibility per review * [CrashReporting] Document reporting modes on the enum per review * [CrashReporting] Match the dump scan to the writer's temp fallback Review nit: when the handler's SHGetKnownFolderPath lookup fails it writes to <temp>/../.., but the startup scan looked in QDir::tempPath(), so a dump produced through the fallback would never be found and its crash would never offer to be reported. Walk up the same two levels in the scan. The path is Windows-only (#ifdef Q_OS_WIN); the statements were compiled and run standalone against Qt 6 to confirm the API use. * [CrashReporting] Complete the dump-scan fallback path The previous commit walked the scan's fallback up two levels but dropped the CrashDumps/Cockatrice suffix that the writer appends unconditionally, so a dump written through the fallback was still invisible to the scan. Evaluate the writer's expression verbatim rather than mirroring it with QDir: cdUp() is existence-checked and silently leaves the path alone when the directory is missing, parent_path() is not, and QDir::absoluteFilePath() joins the shared suffix without risking a doubled separator when the walk lands on a root. Verified by compiling the block verbatim against Qt 6 with -Wextra -Werror and comparing it with the writer's join for both the normal and the fallback case. Also record that %LOCALAPPDATA% is the scan's stand-in for FOLDERID_LocalAppData and why the two normally agree. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-19 14:57:03 +02:00
BruebachL	6c660d6b21	[Installer][Client] Back up user data before old uninstallers can delete it (#7503) ... * [Installer][Client] Back up user data before old uninstallers can delete it * [Installer][Client] Fix stale backup resurrection, batch session backups, extend coverage NSIS: clear stale %TEMP% backup and only arm restore when something was copied, directory-existence checks, back up loose .dec decks, drop downloaded pics but keep pics\CUSTOM. Helper: single session dir per run (ms timestamps), same-basename disambiguation, partial copies still report their location. * [Installer][Client] Fix review findings: throttle backups, NSIS old dir, portable messaging * [Installer][Client] Fix review findings: backup markers, NSIS relocate, size cap * [Installer][Client] Fix review findings: sounds, session coverage, NSIS wording Client: back up data/sounds in portable mode and mention it in the warning; reuse a recent session only when complete and covering the current sources (source manifest), estimate size only for fresh copies, normalize dedup via isInsideDir. Helper: source manifest per session with sessionCoversSources(), clear out-params on all failure paths. NSIS: document defensive portable branch, merge backup over surviving data/ to repair partial deletes, copy (not move) wording in relocate, note .txt exclusion in deck notice. * [Installer][Client] Fix review findings: stale backup, empty reuse, relocate, portable warning NSIS: wipe TEMP backup once per run to avoid resurrecting deleted files, check data dir existence in relocate so dir-only trees are moved. Client: never reuse a recent session for an empty source set, only fall back to a covering session on copy failure, warn fresh portable installs instead of staying silent. * [Installer][Client] Fix review findings: usable session reuse, loose decks, NSIS pics, symlinks * [Installer][Client] Fix portable backup exclusions in offender merge * [Client] Split at-risk data warning into focused helpers Ricky's nit on the 200+ line warnAboutDataPathsInProgramDir: extract collection (portable/installed), backup, message building and dialog into named helpers. No behavior change, all tr() strings untouched. * [Client] Read path settings inside isPortableBackupExcluded * [Client] Make stateless at-risk helpers static * [Client] Extract at-risk data warning out of MainWindow * [Installer][Client] Fix review findings: subdir backup, portable warning, backup API NSIS: - Back up unknown top-level install subdirs (e.g. <installdir>\decks), not just loose deck files, so the 3.1.1 -> new upgrade no longer loses data folders the old RMDir /r deletes before the client ever runs. Payload dirs (plugins/translations/sounds/themes) stay in place to avoid restoring stale DLLs; restore + relocate handle the new backup set and the one-time notice covers both decks and folders. - Restart the %TEMP% backup when the 32/64-bit passes point at different dirs instead of merging (which restored one dir's files into the other); document that only the last pass relocates and the %TEMP% copy is not a durable second copy. Client: - Drop the portable at-risk warning: portable installs never shipped an uninstaller and portable updates preserve data/, so every portable user got a spurious dialog plus daily host-machine copies. - AtRiskDataWarning is now a plain class with Q_DECLARE_TR_FUNCTIONS instead of QObject+Q_OBJECT; logging category renamed to at_risk_data_warning; MainWindow wrapper inlined into startupConfigCheck. - Lower the synchronous startup backup cap 500 -> 200 MB. Utility/tests: - Remove test-only backupAtRiskPath()/findRecentBackupSession() and the no-marker/no-manifest legacy paths; isBackupSessionComplete() now requires the complete marker; tests updated to the plural API. * [Client] Restore collectInstalledAtRiskPaths per review a23e02b5 removed the definition along with the portable helpers, breaking the build (undefined reference at link time, and isInsideAnyDir unused under -Werror on Arch/Debian 13). Restores the 202c0d65 version (pathsInsideDir plus loose top-level deck files) as suggested. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-16 22:05:42 +02:00
BruebachL	f83a61979f	[Installer] Uninstaller deletes only the installed payload, never the whole tree (#7472) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-11 15:34:49 +02:00
BruebachL	315cbae345	[Build] Extend PCH to libraries and grow IWYU-driven header sets (#7456) ... The executables precompile Qt since #7235, but the libcockatrice_* static libraries still reparse the full Qt Core stack in every TU. Measured over the tree after the IWYU pass: 380 MB of header parse in the libraries, 92% of it reachable from qtcore_pch.h. - Apply qtcore_pch.h to the 14 Qt Core static library targets (skips libcockatrice_rng: its SFMT.c is C and cannot use a C++ precompiled header). - Grow qtcore_pch.h with 25 QtCore headers that IWYU shows are re-parsed across many TUs and were not already reachable from the existing list (JSON/QUuid cluster, QSettings, item models, threading, XmlStream, QTemporaryDir, ...). - Grow qtwidgets_pch.h with 30 QtGui/QtWidgets headers (dialog cluster, item views, QImageReader, ...). Only stable Qt headers go into the PCH, so it rarely invalidates. Test executables stay PCH-less: 1-3 TUs per target does not amortize the extra precompile. Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-11 15:07:30 +02:00
BruebachL	bdda3dedfa	[CI] Publish a gcovr line-coverage report from the test run (#7404) ... * [Tests] Register each test case with CTest instead of each test binary Registering a test cost four edits across a dozen CMakeLists files: add_test, add_executable, a conditional add_dependencies on gtest, and target_link_libraries. The conditional branch was the trap -- it is only needed when GTest was fetched and add_subdirectory'd, and omitting it yields undefined gtest symbols at link time -- so it was easy to leave out and impossible to notice until the link failed. Fold all four steps into cockatrice_add_test() and migrate every test directory onto it, with a cockatrice_add_manual_test() wrapper for the three benchmarks that are built but deliberately kept out of ctest. The calls now read as a declaration of what a test is rather than a transcript of how to register one. While rewriting the registrations, replace add_test(NAME x COMMAND x) with gtest_discover_tests(). Naming the binary as a single CTest entry meant a CI failure reported only which binary failed, and ctest -R Suite.Case could not select an individual case. Discovery raises the suite from 35 opaque entries to 469 real ones: ctest -R ThemeMigrationTest.IsIdempotent now runs exactly that case, and ctest -L server / -LE bench work off labels applied at registration. Give every test a 60s TIMEOUT. CTest's implicit default is 1500s, so one hung socket wait would stall CI for 25 minutes, and single_instance_manager_test already does real QLocalSocket waits. Dropping per-case granularity costs wall-clock time, since the suite becomes process-spawn bound rather than CPU bound: serial ctest went from 3.8s to 30.8s. Run it with -j in CI to recover it -- 7.6s at -j4, and 3.5s at -j8, both at or below the old serial time. The binaries are parallel-safe: the only test claiming a fixed resource scopes its local socket name to its own pid, so concurrent copies cannot collide. Also delete dummy_test, which asserted 1 == 1 and only proved the harness was wired up -- something the other 468 cases already establish. No test is added, removed, or changed by this commit; the 469 cases are the same ones the 35 binaries contained. * [Tests] Make QtTest available to test targets QtTest was not among the modules test targets could link, so the Qt model and signal contracts had no way to be verified from a test: QAbstractItemModelTester and QSignalSpy both live there. Add Test to _TEST_NEEDED in cmake/FindQtRuntime.cmake. That is the single place the union of test-only Qt modules is declared, so this is the only file that needs to change to make the module reachable from every test target. Nothing uses it yet. This lands the capability ahead of the model-layer tests that need it, so those can be added as tests alone rather than as test plus build-system plumbing. * [Tests] Correct the note on the oracle test compression defines add_definitions() populates the directory's COMPILE_DEFINITIONS property, which is consumed at generate time, so it reaches every target in the directory no matter where it is called relative to add_executable(). The previous note claimed the flags stayed confined to the benchmark because the find_package block came after it; oracle_importer_test, created above that block, carries both defines too. Verified harmless rather than a live bug: HAS_ZLIB and HAS_LZMA gate code only in oracle/src/pages.cpp and oracle/src/pagetemplates.cpp, and no test target compiles either. The ordering and the leaked defines are both pre-existing, so this only corrects the explanation. * [Tests] Carry one CTest label per test instead of several gtest_discover_tests() can hand CTest exactly one label. GoogleTestAddTests.cmake accumulates its generated script with `foreach(arg ${ARGN})`, so a label list reaches the CTestTestfile as bare `LABELS ci server`, and CTest reads only the first value of a property and drops the rest without a word. The `ci` label that is appended to every registered test was therefore absent from every test that also asked for `server` or `bench`: `ctest -L ci` reported 400 of 469 cases, and `ctest --print-labels` never listed a second label anywhere in the build. Reduce each test to exactly one of `ci`, `server`, or `bench`, which is all the selections need. The three now partition the suite exactly, 400 + 64 + 5 = 469, and `ctest -LE bench` still means everything but benchmarks. A second label is now a configure-time FATAL_ERROR rather than a line that quietly means something else. Anything orthogonal to a test's kind belongs in a helper flag beside the label, so it composes with the group instead of competing for the single slot. Also raise DISCOVERY_TIMEOUT off GoogleTestAddTests' 5s default. A plain debug binary answers --gtest_list_tests in 0.04s, but that budget is thin once several binaries discover concurrently behind a -j build, and being over it fails at the *link* step with a bare "Process terminated due to timeout" that points nowhere near the cause. * [Tests] Link gtest_main on the fetched-gtest path The downloaded-gtest branch set GTEST_BOTH_LIBRARIES to `gtest` alone, while FindGTest sets it to both halves. Every test target links that list rather than picking an entry point, so on this path nothing provides main() and any test source that does not define its own fails at link with `undefined reference to main` pointing at crt1.o, naming neither gtest nor the line responsible. That stayed latent while every test carried its own four-line main(). A test that omits it now fails, and the error points at the C runtime rather than at gtest, which is a long way from the cause. Restoring both halves makes the two paths agree and drops the boilerplate requirement on new test sources. The 18 sources that still define main() keep linking: gtest_main.cc defines nothing but main, so the linker leaves its object in the archive unused rather than reporting a duplicate. * [Build] Add an ENABLE_SANITIZERS option for ASan and UBSan Adds -DENABLE_SANITIZERS, off by default, building with AddressSanitizer and UndefinedBehaviorSanitizer. The bulk of the work is in the three ways the obvious implementation silently does the wrong thing. Probe the flags on the link step, not just the compile step. check_cxx_compiler_flag() only compiles, so every sanitizer flag comes back unsupported, because linking an ASan object without -fsanitize=address leaves __asan_init undefined. The result is not a build failure but a build that appears instrumented and is not, which is worse. Use check_cxx_source_compiles() with CMAKE_REQUIRED_LINK_OPTIONS instead, and treat an unsupported sanitizer pair as fatal since the cosmetic flags are allowed to degrade. Opt vendored sources out per source, through a cockatrice_disable_sanitizers_for() helper rather than a list of set_source_files_properties() calls at the root. The helper has to exist because CMake resolves a source-file property against the directory scope its target was declared in: setting the property from the root with absolute paths is a no-op, silently, which is why the call sites sit next to the add_library and add_executable that pull the vendored code in. SFMT, minizip, the LZMA SDK and Qxt SMTP are excluded. oracle/src/qt-json is in the history but not in the tree, removed in #7214. Also mark those sources SKIP_PRECOMPILE_HEADERS. The PCH is built with the sanitizer flags, so it defines __SANITIZE_ADDRESS__; a translation unit compiled with -fno-sanitize=all does not and GCC then refuses the PCH, which is a fatal -Werror=invalid-pch in the servatrice and oracle builds. -fno-sanitize=vptr is not optional. Qt constructs QObject subclasses into raw storage and writes the vptr afterwards, so the vptr check reports on essentially every QObject instantiation, and it has no value here because nothing outside moc-generated code inherits QObject. Verified on the resulting build: our own translation units carry ASan and UBSan calls, SFMT.o carries neither, and the full suite of 464 cases passes clean under ASAN_OPTIONS=detect_leaks=0:abort_on_error=1 with UBSAN_OPTIONS=halt_on_error=0. The test suite needs two adjustments to make this option usable at all, both of which land here because they are consequences of COCKATRICE_SANITIZERS existing rather than independent changes. DISCOVERY_TIMEOUT rises from 60s to 300s under sanitizers. An instrumented binary takes 2.8s to answer --gtest_list_tests against 0.04s uninstrumented, and discovery runs several binaries at once behind a -j build. One target is excluded via a NO_SANITIZE flag, server_developer_role_test. Reaching google::protobuf::TextFormat::Printer's destructor aborts on an absl assertion inside system protobuf 33.4 whenever the consumer translation unit is built without NDEBUG, which a Debug sanitizer build is. This reproduces with no Cockatrice code at all, just "TextFormat::Printer p; p.PrintToString(msg, &out);" built with -fsanitize=address, so it is upstream rather than ours. It is a flag and not a fourth label because "skip this in the sanitizer leg" has to compose with a test's group rather than compete for the single label slot, and because a flag excludes by not registering the cases at all, which cannot rot the way a label silently can. The target still builds and still runs on the legs without sanitizers. * [CI] Run the suite once under ASan and UBSan Adds --sanitize to .ci/compile.sh, mirroring --test, and turns it on for one entry of the existing Linux Docker matrix: Ubuntu 26.04, which already had a test-enabled leg. That reuses the image, the ccache layer and the existing step shape, so the CI diff is a matrix key plus the argument plumbing. Debian 13 and Fedora 44 keep covering the uninstrumented suite, so nothing is lost by instrumenting one leg. Sanitizers stay off the release and package legs, which build with --release for packaging: instrumenting those would change the shipped binaries' optimization profile and build time for no benefit. macOS and Windows stay uninstrumented too, since ASan is unreliable against the Qt build there and MSVC has no equivalent without /fsanitize=address. --sanitize does not imply --test, so an instrumented build can be produced locally without paying for ctest. When both are given, ctest runs with detect_leaks=0 because Qt and the sanitizer runtimes both leak at exit by design and LeakSanitizer's default buries real findings under hundreds of process-teardown reports, and with UBSan halt_on_error=0 so one run collects many findings instead of stopping at the first. ASan keeps abort_on_error=1, since a bad access leaves the process unusable and continuing only produces a second, more confusing report from the wreckage. * [CI] Publish a gcovr line-coverage report from the test run Sanitizers tell us what a run did wrong; they say nothing about what it never reached. This adds the other half: an instrumented build whose report says which of our own lines no test executes. Add an ENABLE_COVERAGE option that compiles with --coverage -O0 -g, mirroring the ENABLE_SANITIZERS opt-in including the per-source carve-out that keeps vendored trees out of the denominator. -O0 is deliberate: at higher optimisation levels GCC merges and relocates lines, so the report would describe code that no longer exists in that form. Only GCC is supported, since Clang's intermediate format needs llvm-cov; asking for coverage under Clang is a hard error rather than a build that silently produces unreadable .gcno files. Keep the filters in a committed gcovr.cfg rather than in the invocation. The tests themselves are excluded because they are compiled with the same instrumentation and are only ever executed by the run doing the measuring, so leaving them in would report a healthier project than we have. The process entry points and the client's window chrome go too: each needs a display, an interactive terminal or a live database before it does anything a headless test could observe, so they would otherwise sit at 0% forever and bury real movement. Give coverage its own matrix leg rather than a second flag on the sanitizer leg. The two answer different questions, and combining them slows both down without telling us more. The new variant key gives the leg its own Docker image and ccache entry so the two legs cannot race on the same tag. The leg publishes an HTML report with per-file pages, LCOV, Cobertura XML and a JSON summary. gcovr is a report-time dependency rather than a build dependency, so a missing one warns and skips instead of failing an otherwise green build. * [CI] Resolve the coverage source root before the build dir cd The previous commit computed SRC_ROOT after `cd "$BUILD_DIR"`, under a comment claiming it ran before. `$0` is relative to the directory the script was invoked from, so from inside the build dir `dirname "$0"` no longer resolves and the subshell's `cd` fails. Under `set -e` that is fatal rather than an empty variable, which took down every leg in the matrix, coverage or not, including the ones this change does not otherwise touch. Move it above the cd and guard it on MAKE_COVERAGE, since the coverage report is the only consumer. Resolving it unconditionally meant a coverage-only detail was paid for by every build in the fleet, and gave every one of them a way to fail. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-11 15:05:28 +02:00
BruebachL	8822ade49d	[Tests] Register each test case with CTest instead of each test binary (#7399) ... * [Tests] Register each test case with CTest instead of each test binary Registering a test cost four edits across a dozen CMakeLists files: add_test, add_executable, a conditional add_dependencies on gtest, and target_link_libraries. The conditional branch was the trap -- it is only needed when GTest was fetched and add_subdirectory'd, and omitting it yields undefined gtest symbols at link time -- so it was easy to leave out and impossible to notice until the link failed. Fold all four steps into cockatrice_add_test() and migrate every test directory onto it, with a cockatrice_add_manual_test() wrapper for the three benchmarks that are built but deliberately kept out of ctest. The calls now read as a declaration of what a test is rather than a transcript of how to register one. While rewriting the registrations, replace add_test(NAME x COMMAND x) with gtest_discover_tests(). Naming the binary as a single CTest entry meant a CI failure reported only which binary failed, and ctest -R Suite.Case could not select an individual case. Discovery raises the suite from 35 opaque entries to 469 real ones: ctest -R ThemeMigrationTest.IsIdempotent now runs exactly that case, and ctest -L server / -LE bench work off labels applied at registration. Give every test a 60s TIMEOUT. CTest's implicit default is 1500s, so one hung socket wait would stall CI for 25 minutes, and single_instance_manager_test already does real QLocalSocket waits. Dropping per-case granularity costs wall-clock time, since the suite becomes process-spawn bound rather than CPU bound: serial ctest went from 3.8s to 30.8s. Run it with -j in CI to recover it -- 7.6s at -j4, and 3.5s at -j8, both at or below the old serial time. The binaries are parallel-safe: the only test claiming a fixed resource scopes its local socket name to its own pid, so concurrent copies cannot collide. Also delete dummy_test, which asserted 1 == 1 and only proved the harness was wired up -- something the other 468 cases already establish. No test is added, removed, or changed by this commit; the 469 cases are the same ones the 35 binaries contained. * [Tests] Make QtTest available to test targets QtTest was not among the modules test targets could link, so the Qt model and signal contracts had no way to be verified from a test: QAbstractItemModelTester and QSignalSpy both live there. Add Test to _TEST_NEEDED in cmake/FindQtRuntime.cmake. That is the single place the union of test-only Qt modules is declared, so this is the only file that needs to change to make the module reachable from every test target. Nothing uses it yet. This lands the capability ahead of the model-layer tests that need it, so those can be added as tests alone rather than as test plus build-system plumbing. * [Tests] Correct the note on the oracle test compression defines add_definitions() populates the directory's COMPILE_DEFINITIONS property, which is consumed at generate time, so it reaches every target in the directory no matter where it is called relative to add_executable(). The previous note claimed the flags stayed confined to the benchmark because the find_package block came after it; oracle_importer_test, created above that block, carries both defines too. Verified harmless rather than a live bug: HAS_ZLIB and HAS_LZMA gate code only in oracle/src/pages.cpp and oracle/src/pagetemplates.cpp, and no test target compiles either. The ordering and the leaked defines are both pre-existing, so this only corrects the explanation. * [Tests] Carry one CTest label per test instead of several gtest_discover_tests() can hand CTest exactly one label. GoogleTestAddTests.cmake accumulates its generated script with `foreach(arg ${ARGN})`, so a label list reaches the CTestTestfile as bare `LABELS ci server`, and CTest reads only the first value of a property and drops the rest without a word. The `ci` label that is appended to every registered test was therefore absent from every test that also asked for `server` or `bench`: `ctest -L ci` reported 400 of 469 cases, and `ctest --print-labels` never listed a second label anywhere in the build. Reduce each test to exactly one of `ci`, `server`, or `bench`, which is all the selections need. The three now partition the suite exactly, 400 + 64 + 5 = 469, and `ctest -LE bench` still means everything but benchmarks. A second label is now a configure-time FATAL_ERROR rather than a line that quietly means something else. Anything orthogonal to a test's kind belongs in a helper flag beside the label, so it composes with the group instead of competing for the single slot. Also raise DISCOVERY_TIMEOUT off GoogleTestAddTests' 5s default. A plain debug binary answers --gtest_list_tests in 0.04s, but that budget is thin once several binaries discover concurrently behind a -j build, and being over it fails at the *link* step with a bare "Process terminated due to timeout" that points nowhere near the cause. * [Tests] Link gtest_main on the fetched-gtest path The downloaded-gtest branch set GTEST_BOTH_LIBRARIES to `gtest` alone, while FindGTest sets it to both halves. Every test target links that list rather than picking an entry point, so on this path nothing provides main() and any test source that does not define its own fails at link with `undefined reference to main` pointing at crt1.o, naming neither gtest nor the line responsible. That stayed latent while every test carried its own four-line main(). A test that omits it now fails, and the error points at the C runtime rather than at gtest, which is a long way from the cause. Restoring both halves makes the two paths agree and drops the boilerplate requirement on new test sources. The 18 sources that still define main() keep linking: gtest_main.cc defines nothing but main, so the linker leaves its object in the archive unused rather than reporting a duplicate. * [Build] Run the test suite under ASan and UBSan (#7400) * [Build] Add an ENABLE_SANITIZERS option for ASan and UBSan Adds -DENABLE_SANITIZERS, off by default, building with AddressSanitizer and UndefinedBehaviorSanitizer. The bulk of the work is in the three ways the obvious implementation silently does the wrong thing. Probe the flags on the link step, not just the compile step. check_cxx_compiler_flag() only compiles, so every sanitizer flag comes back unsupported, because linking an ASan object without -fsanitize=address leaves __asan_init undefined. The result is not a build failure but a build that appears instrumented and is not, which is worse. Use check_cxx_source_compiles() with CMAKE_REQUIRED_LINK_OPTIONS instead, and treat an unsupported sanitizer pair as fatal since the cosmetic flags are allowed to degrade. Opt vendored sources out per source, through a cockatrice_disable_sanitizers_for() helper rather than a list of set_source_files_properties() calls at the root. The helper has to exist because CMake resolves a source-file property against the directory scope its target was declared in: setting the property from the root with absolute paths is a no-op, silently, which is why the call sites sit next to the add_library and add_executable that pull the vendored code in. SFMT, minizip, the LZMA SDK and Qxt SMTP are excluded. oracle/src/qt-json is in the history but not in the tree, removed in #7214. Also mark those sources SKIP_PRECOMPILE_HEADERS. The PCH is built with the sanitizer flags, so it defines __SANITIZE_ADDRESS__; a translation unit compiled with -fno-sanitize=all does not and GCC then refuses the PCH, which is a fatal -Werror=invalid-pch in the servatrice and oracle builds. -fno-sanitize=vptr is not optional. Qt constructs QObject subclasses into raw storage and writes the vptr afterwards, so the vptr check reports on essentially every QObject instantiation, and it has no value here because nothing outside moc-generated code inherits QObject. Verified on the resulting build: our own translation units carry ASan and UBSan calls, SFMT.o carries neither, and the full suite of 464 cases passes clean under ASAN_OPTIONS=detect_leaks=0:abort_on_error=1 with UBSAN_OPTIONS=halt_on_error=0. The test suite needs two adjustments to make this option usable at all, both of which land here because they are consequences of COCKATRICE_SANITIZERS existing rather than independent changes. DISCOVERY_TIMEOUT rises from 60s to 300s under sanitizers. An instrumented binary takes 2.8s to answer --gtest_list_tests against 0.04s uninstrumented, and discovery runs several binaries at once behind a -j build. One target is excluded via a NO_SANITIZE flag, server_developer_role_test. Reaching google::protobuf::TextFormat::Printer's destructor aborts on an absl assertion inside system protobuf 33.4 whenever the consumer translation unit is built without NDEBUG, which a Debug sanitizer build is. This reproduces with no Cockatrice code at all, just "TextFormat::Printer p; p.PrintToString(msg, &out);" built with -fsanitize=address, so it is upstream rather than ours. It is a flag and not a fourth label because "skip this in the sanitizer leg" has to compose with a test's group rather than compete for the single label slot, and because a flag excludes by not registering the cases at all, which cannot rot the way a label silently can. The target still builds and still runs on the legs without sanitizers. * [CI] Run the suite once under ASan and UBSan Adds --sanitize to .ci/compile.sh, mirroring --test, and turns it on for one entry of the existing Linux Docker matrix: Ubuntu 26.04, which already had a test-enabled leg. That reuses the image, the ccache layer and the existing step shape, so the CI diff is a matrix key plus the argument plumbing. Debian 13 and Fedora 44 keep covering the uninstrumented suite, so nothing is lost by instrumenting one leg. Sanitizers stay off the release and package legs, which build with --release for packaging: instrumenting those would change the shipped binaries' optimization profile and build time for no benefit. macOS and Windows stay uninstrumented too, since ASan is unreliable against the Qt build there and MSVC has no equivalent without /fsanitize=address. --sanitize does not imply --test, so an instrumented build can be produced locally without paying for ctest. When both are given, ctest runs with detect_leaks=0 because Qt and the sanitizer runtimes both leak at exit by design and LeakSanitizer's default buries real findings under hundreds of process-teardown reports, and with UBSan halt_on_error=0 so one run collects many findings instead of stopping at the first. ASan keeps abort_on_error=1, since a bad access leaves the process unusable and continuing only produces a second, more confusing report from the wreckage. * [Build] Fix sanitizer flag leak into release package and make UBSan fail CI - compile.sh always passes -DENABLE_SANITIZERS explicitly so the release-package reconfigure in the same build dir cannot inherit ON from the sanitized debug step (which shipped libasan/libubsan DEB deps). - Sanitizers.cmake resets COCKATRICE_SANITIZERS to OFF when the option is off (CACHE INTERNAL otherwise sticks forever, keeping NO_SANITIZE skips and the 300s discovery timeout). - UBSan now fails the job: -fno-sanitize-recover=undefined at compile time plus UBSAN_OPTIONS halt_on_error=1 (recover mode exits 0, so the old halt_on_error=0 could never fail). --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de> --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-11 14:50:09 +02:00
BruebachL	1e1f79db0d	[Windows] Wait for uninstaller, rework .dll bundling, add logging (#7407) ... * [Windows] Purge every runtime DLL on upgrade instead of a named few A user updating from 3.0.2 to 3.1 got "abseil_dll.dll is either not designed to run on Windows or it contains an error" and could not start the client. abseil_dll.dll comes from vcpkg, not Qt. It rides into the install directory on the "*.dll" glob in cockatrice/CMakeLists.txt, alongside libprotobuf.dll, liblzma.dll and z.dll, and none of those were named in the upgrade purge. So on an upgrade the old uninstaller's RMDir /r skipped whichever of them was locked, the purge did not look for them, HasStaleRuntimeFiles did not look for them either, and the installer reported success - having written the new executables next to the previous version's protobuf runtime. Windows then refused to load it. The mask list was also already wrong where it existed: it matches zlib*.dll while vcpkg ships z.dll. Delete every top-level DLL instead of naming library families. The payload is written after the purge, so a DLL the new build still needs is put straight back; what the purge has to guarantee is only that nothing from the previous build is left to be loaded next to the new executables. Enumerated families cannot do that - every transitive dependency that arrives between two releases is one more name to forget, and the three previous rounds of this work each reasoned about Qt because that is what the reports named at the time. HasStaleRuntimeFiles collapses to the matching *.dll probe, so the abort fires on any survivor rather than only on the families it was told about. IsExistingCockatriceInstall stays on Qt6*.dll on purpose: it decides whether a directory is ours at all, and a folder that merely holds some DLLs of its own must not be purged. Qt6*.dll is enough even when only the protobuf runtime survived, because the whole Qt set is mapped by the same process that maps abseil_dll.dll and so is locked or free with it. * [CI] Assert the whole Windows runtime, not just the Qt modules required-qt-runtime.txt listed only the Qt modules COCKATRICE_QT_MODULES names, so it could not see any other runtime go missing. The three previous rounds of installer work all reasoned about Qt*.dll because that was all the build knew how to ask about, and the one runtime that actually broke the reported upgrade - abseil_dll.dll - was outside the set entirely. - Rename it to required-runtime.txt and take the third party runtime names from the vcpkg bin directory the app-local copies come from, so a dependency bump cannot leave the list behind and a versioned name such as libcrypto-3-x64.dll becoming libcrypto-4-x64.dll cannot either - Union the three applications' module lists rather than the client's alone: Servatrice contributes Qt6Sql.dll, servatrice.exe is installed next to cockatrice.exe and cannot start without it, and nothing asserted it - Add Core to the client's module list. It is the one module nothing can do without and it only ever arrived transitively, so Qt6Core.dll was shipped and never checked - the new unknown-runtime check flagged it on the first run - Fail the build on a missing runtime, as before, and warn on a runtime nothing requires. Only the test framework is a hard failure there: "no shipped executable links gtest" is a fact, whereas a runtime missing from the manifest may be one the manifest failed to derive, and a check that has never run before should not be able to block a release The warning is meant to be read. Qt6::Quick pulls in Qml, QmlModels, QmlWorkerScript, QuickBasic, QuickTemplates2 and OpenGL transitively and none are named, so the manifest is known to be a partial list; the first Windows run reports the real one, which is evidence rather than a guess about what Qt links. Fold that back in when it lands. * [CI] Stop deriving the required runtime from the vcpkg bin directory The first Windows run of this check failed, and the seven files it named as missing are not runtime at all: gmock.dll, gmock_main.dll, legacy.dll, libprotobuf-lite.dll, libprotoc.dll and pthreadVC3/VCE3/VSE3.dll. None of them is linked by any shipped executable, so a correct package leaves them out. vcpkg_installed/x64-windows/bin is everything vcpkg installed, not everything the applications import. The protoc compiler, the GoogleMock library, a port tool and three CMake FindThreads probes sit beside the genuine runtimes, and a directory listing cannot tell them apart. Asserting it fails the build over a package that is right - which is what happened, and it is the same mistake as the one that produced this bug report: reasoning about a list of names instead of about the build. The real source of truth is the three executables' import tables, which fixup_bundle already walks to decide what to copy. Until CMake can read that result, the Qt half is what can be derived honestly, from the same module lists the targets are built against. So assert that, and report the rest rather than require it: - Drop the vcpkg bin glob, its gtest filter and the vcpkg-runtime-known marker. All three existed only to support the glob. - Report top level DLLs the manifest does not name without failing. These are expected: protobuf, Abseil, OpenSSL, liblzma, ffmpeg and the Qt debug DLLs all arrive on the build output glob because nothing in the build declares them by name. The list is a report of what the package carries, not a verdict, and it is how the missing Qt6Qml/Quick/OpenGL entries above became visible. - Report a leaked gtest or gmock instead of failing on it. "No shipped executable links this" is a fact, but a check that has never passed on a real package has not earned the right to block a release, and the first run of an enforcing version is exactly when its own wrong assumptions show up. - Skip DLLs under a subdirectory, which are platform plugins rather than imported runtimes, and the NSIS plugins, which extract to $PLUGINSDIR and so reach the comparison looking like payload. Verified against the paths 7-Zip actually listed in the failing package: the check passes on it, still fails when Qt6Sql.dll or the qwindows plugin is removed, and still reports gtest.dll and gmock.dll if either is added. The purge in cmake/NSIS.template.in covers the runtimes the manifest does not name. That fix is independent of any list and is what makes the reported update failure go away. * [Installer] Fix the /R upgrade aborting before it does anything WaitForLauncherToExit read the wrong registers. System.dll writes its .rN outputs to $N and its .RN outputs to $RN, but the wait used p.r0/i.r1 while testing $R1. $R1 therefore stayed empty, and the "did not exit" test compared "" with "0" - true every time. Every in-app update passes /PID=, so every upgrade hit AbortInstall before writing anything; because /R also sets silent, the override just vanished with exit code 1 and no message. The bug came in with #7372 and is inherited by this branch, not introduced by it. Use the uppercase .RN forms, and treat a null or plugin-failed OpenProcess as the launcher already being gone - the case the old ${Errors} check never caught, because System.dll does not set the NSIS error flag from the callee's return value. Also restore the abort dialog for the in-app updater: AbortInstall and the two inline warnings gated their message box on ${IfNot} ${Silent}, which is false for a /R upgrade, so any abort on that path was equally silent. The unattended case is a /S install without /R, not /R, so show the box for $ReinstallMode = 1 or an interactive install. The stale-runtime abort now goes through AbortInstall so that decision lives in one place. * [Installer] Log every upgrade step to %TEMP%\Cockatrice-installer.log * [Installer] Actually append to the upgrade log (FileSeek END) * [Installer] Wait for the old uninstaller before replacing files An NSIS uninstaller copies itself to %TEMP% and runs from there so that it can delete its own directory; the process the installer started exits immediately. A plain ExecWait therefore returns before the uninstall has run, and the temp copy's "RMDir /r $INSTDIR" then executes concurrently with the install section, deleting files the payload just wrote. That is why an upgrade could leave Qt6Core/Gui/Multimedia and the other alphabetically-first DLLs missing while the tail of the directory survived: a recursive delete marching from the front while the final listing ran. Pass _?=$INSTDIR to the old uninstaller so it runs in place and ExecWait actually blocks until the uninstall completes. _?= must be the last argument and unquoted, even for paths with spaces. Applied to both the silent /R path (AutoUninstallIfNeeded) and the interactive path (componentsPagePre). * [Installer] Tighten the wording of the upgrade comments Drop the dash-heavy phrasing from the comments this PR adds, and say plainly in the _?= comment that ExecWait returns before the old uninstaller has run and the temp copy then deletes the payload the section is still writing. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-09 20:09:34 +02:00
BruebachL	ecd955bc60	[Installer] Wait on the launching process so auto-updates cannot write over a mixed Qt runtime (#7372) ... * [Installer] Abort instead of installing over leftover runtime files The silent upgrade could leave a mix of old and new Qt DLLs next to the new executables, which is what makes the next start fail with "The procedure entry point X could not be located in the dynamic link library ...Qt6QuickWidgets.dll" or "The code execution cannot proceed because Qt6Multimedia.dll was not found". The check that was supposed to catch this probed only Qt6Core.dll and Qt6Network.dll, so it was blind to the two files the reports name. It also only warned and then installed anyway, so a caught problem was still compounded. - Scan every file the purge targets with FindFirst, which takes the same wildcards the Delete/RMDir calls use, instead of two hardcoded names - Widen IsExistingCockatriceInstall from Qt6Core.dll to Qt6*.dll so a directory left holding only some Qt modules is still recognised as an install - Gate the scan on that, so a first-time install into a directory that happens to hold unrelated Qt5 DLLs is not turned into an abort - Abort with a non-zero exit code instead of warning, so the new payload is never written next to files of the previous version - Skip the message box on an unattended /S install, which would block on it forever, matching the two existing abort sites * [Installer] Cancel a silent upgrade when the running-instance guard fails The running instance guard is what stands between a locked install directory and the mixed Qt DLL set that breaks the next start, but it failed open in two places and let the install carry on anyway: - powershell.exe could not be started: the check warned and returned - the process lookup answered "could not determine": WaitForAppToClose returned on $R0 != 1, so "unknown" was treated exactly like "not running" On a silent upgrade there is nobody at the keyboard to close the applications in response to that warning, which is precisely the state in which the launcher was still holding its Qt DLLs mapped. - Treat "could not determine" as its own state rather than folding it into "not running", in all three places WaitForAppToClose inspects the result - Cancel a silent upgrade in both cases; keep an interactive install on the existing warn-and-continue path, since refusing there would leave an installer that can never complete and the stale-runtime check still applies - Route every abort through one AbortInstall so the dialog-vs-silent decision lives in a single place, and stop the two pre-existing warning dialogs that a /S install without /R would have blocked on forever * [Installer] Wait on the process that launched the update installer The in-app updater starts the installer and only then quits itself, so the installer has to decide whether the launching process is still alive while it is running. It did that by polling powershell.exe for an image name under the install directory, which is a proxy for the real question - is the process that started me still holding its Qt DLLs mapped - and a proxy that can answer "not running" or "could not determine" while the process is very much alive. Either answer let the install carry on into the mixed Qt DLL set. Take /PID= from the command line and wait on that process handle directly: - OpenProcess with PROCESS_SYNCHRONIZE only, which is all that is needed to wait and the least likely to be refused for an unrelated reason - WaitForSingleObject for the same 60 s the name based check allows, so a client slow to flush its card database is not squeezed - Treat an unopenable handle as "already exited", which is what it means for a dead process - Cancel the upgrade if the launcher has not exited, rather than replacing files it is still using Run it before EnsureAppsNotRunning, not after: it needs no powershell.exe, so it is the one check that still works on a machine where the process lookup cannot run, and it is what lets that case keep upgrading instead of being cancelled by what was only ever a proxy for it. Keep an older client, which passes no /PID=, on the existing path. An older installer ignores /PID=, and /D= stays the last parameter either way. * [Client] Pass our process id to the update installer The updater starts the installer and only then quits itself, so the installer begins replacing files while this process still has every Qt runtime DLL mapped, and a mapped DLL cannot be deleted. It has to work out that it must wait, and until now all it had was its own image name to go on. Pass /PID= so it can wait on this process directly instead of guessing, and cancel the update rather than replace files this process is still using. /D= stays the last parameter, which NSIS requires. * [CI] Fail the build when the installer is missing a Qt runtime DLL The Windows payload is assembled by globbing every *.dll out of the build output directories, so nothing but luck decides whether a module the client links statically - Qt6Multimedia.dll, Qt6QuickWidgets.dll - reaches the installer at all. A module that is left out is invisible until a user installs an update and the client then refuses to start, with "The code execution cannot proceed because Qt6Multimedia.dll was not found" or a missing procedure entry point in a Qt6QuickWidgets.dll carried over from the previous version. Derive the required list from SERVATRICE_QT_MODULES, COCKATRICE_QT_MODULES and ORACLE_QT_MODULES, the same module lists the targets are actually built against, so it cannot drift from what the binaries need, and write it next to the CMake cache as required-qt-runtime.txt. Add the platform plugin, without which the client cannot start at all. Assert it in the existing 7-Zip pass that already rejects build-tree artifacts, comparing exact relative paths so a same-named file in the wrong directory does not satisfy a requirement, and normalizing the archive's own separators so it does not matter which one NSIS chose. Missing manifest, missing entry or missing 7-Zip-independent failures all stop the build rather than warn, which is the whole point: the previous check already failed hard for artifacts, and a warning here is what let a broken package ship. * [Client] Point the Windows qt.conf translations path at the real one The Windows qt.conf carried Translations = Resources/translations, copied from the macOS bundle block, but the Windows install has no Resources directory: the .qm files are installed to COCKATRICE_WIN32_QM_INSTALL_DIR, which is translations, and main.cpp looks for them at applicationDirPath() + "/translations". Leave the macOS value alone, which is correct for it. * [Installer] Close the /? help string so the installer compiles again The last line of the continued MessageBox string ended in $\n\" instead of $\n". NSIS reads \" as an escaped quote, so the string never terminated and makensis rejected the script, which took the CPack packaging step down with it. The Windows build failed on "Problem running NSIS command" before ever reaching the new required-runtime check. * [Installer] Give FindFirst the two arguments it takes FindFirst takes the pattern and the output variable and leaves the search handle in $0. There is no handle argument, and FindNext taking only a variable is the giveaway: the handle has to live somewhere implicit, and it is $0. The call passed three arguments, so makensis rejected the script and the CPack packaging step failed with "Problem running NSIS command" before ever reaching the required-runtime check. This was not only a compile error. The handle variable was never populated, so the stale-runtime check that commit 844a1a9b added could never see a match: it probed $StaleFindHandle, which stayed empty, and the widened wildcard scan over the purge set was a no-op. Pass the pattern, test $0, and close $0. No FindNext is needed, because $R0 is a yes/no flag rather than a list. Drops the now unused StaleFindHandle Var. * [CI] Dump the NSIS compile log when packaging fails CPack reports a failed makensis run as "Problem running NSIS command" plus a path to NSISOutput.log, and that log exists only on the runner, so the actual compile error never reaches the workflow output. An installer script that does not compile is therefore undiagnosable from CI alone, which is exactly how a three-argument FindFirst cost two build cycles here. * [CI] Run the NSIS log dump under bash The dump step used the default pwsh shell, where `find` resolves to Windows' text-search find.exe rather than a file finder, so it died with "FIND: Parameter format not correct" instead of printing anything. Pin shell: bash. * [Installer] Test the error flag with LogicLib's ${Errors} condition makensis rejected the script with "macro _If requires 4 parameter(s), passed 2" at the ClearErrors/OpenProcess pair. A ${If} condition cannot be a bare $Var: LogicLib needs either a comparison or one of its flag macros, and a lone $Errors splits into too few arguments for _If. ${Errors} is the documented flag condition and is the same mechanism as the ${Silent} test already used here. The dump step earned its keep - this took one run to locate rather than another round of guessing. * [Installer] Give FindFirst its handle back and stop blocking silent aborts makensis: "FindFirst expects 3 parameters, got 2. Usage: FindFirst $(user_var: handle output) $(user_var: filename output) filespec". The previous commit was wrong about this. FindFirst does take the handle explicitly, and FindNext finds it in $0 as a side effect of the FindFirst that set it, which is why FindNext takes only a variable. The three-argument form the stale-runtime check was written with was correct all along, and the two-argument form broke it. Restored, along with Var StaleFindHandle. That same commit inverted the interactive check in both abort paths. `${If} $ReinstallMode = 1` with `${OrIfNot} ${Silent}` shows the message box exactly when the install is the silent /R upgrade - the one case the comment says must never block, since nothing will dismiss it and the installer hangs until it is killed. Replaced with `${IfNot} ${Silent}`, so the box appears only for an interactive install and a silent abort goes straight to SetErrorLevel. Audited every construct added by this branch against master, which compiles: all 9 LogicLib condition shapes have a master precedent, FindFirst is the only FindFirst and is back to 3 arguments, Function/Section and block depth balance, and the 12 lines with an odd number of quotes are the same pre-existing string continuations master has. * [CI] Strip the CR 7-Zip leaves on its paths before comparing them The installer check reported all 14 required files missing, including Qt6Core-era basics an 82 MB package obviously contains, so the payload was fine and the comparison was broken. 7-Zip writes CRLF on Windows, sed 's/^Path = //p' kept the \r on every line, and grep -qxF matches whole lines - so every entry carried a trailing \r and nothing matched. The build-tree artifact check next to it uses an unanchored grep -E and was unaffected, which is what made the two checks disagree. Reproduced locally against a 7z archive with CRLF injected: the old pipeline matches nothing, the new one finds the present files and reports only the genuinely absent one. Also match case-insensitively. That is how the installed tree behaves - the uninstaller clears both $INSTDIR\plugins and $INSTDIR\Plugins - so a Plugins vs plugins difference in the archive is not a missing file. * [CI] Print both sides of the installer path comparison, and strip its prefixes The check still reported all 14 files missing after the CR fix, so the CR was not the cause and the real difference between 7-Zip's output and the manifest is still unknown. Inferring it again is what produced two wrong fixes in a row, so on failure the check now prints the required list and the first 40 paths 7-Zip lists. A bare "missing" line cannot distinguish a missing file from a misread listing, and twice it was the latter. Also strip $INSTDIR/, $OUTDIR/, $PLUGINSDIR/ and ./ prefixes from the listed paths. Written as separate -e expressions rather than one alternation: with | as the sed delimiter an escaped \| is a literal pipe, so the alternation version silently matched nothing at all. Verified against a 7z archive fed through seven path shapes - plain, Windows backslashes with CRLF, each prefix, lowercase plugins, and all of them combined - each reporting only the file genuinely absent from the archive. * [CI] Strip CR from the manifest side of the installer path check The dump added last run settled it: 7-Zip listed 209 paths including Qt6Gui.dll, Qt6Multimedia.dll and Plugins/platforms/qwindows.dll verbatim, as plain relative paths with no prefix - so the archive side was already clean and the previous fix was right to strip CR there but not sufficient. The trailing CR was on the other side. CMake writes required-qt-runtime.txt with the platform line ending, so on Windows $entry arrived as "Qt6Gui.dll\r", which cannot whole-line match a clean "Qt6Gui.dll". Every entry then read as missing while the listing held it, which is precisely what the two sides of the dump showed. Reproduced locally with a CRLF manifest against a 7z archive: without the strip every entry is reported missing, with it only the genuinely absent file is. Checked across plain paths, Windows backslashes with CRLF, $INSTDIR, $OUTDIR, $PLUGINSDIR, ./ and / prefixes. The literal $INSTDIR-style prefixes are written as [$] bracket expressions so shellcheck does not read them as unexpanded variables; that clears the SC2016 that failed the format job, without a disable directive. * [CI] Reword the bracket-expression comment so the linter stops parsing it A comment whose first word is shellcheck is read as a directive, so "# shellcheck does not read these as unexpanded shell variables" was parsed as a directive named "does" and failed with SC1073 and SC1072 - which cascaded into the SC1009 on the else clause above it. The SC2016 it was meant to document is already gone now that the prefixes are written as [$] bracket expressions, so the note only had to stop looking like a directive. * [CI] Indent the diagnostic path lists without sed, and undo comment drift SC2001 asks for parameter expansion instead of sed 's/^/ /'. Echoing ${manifest//$'\n'/$'\n '} prepends the two spaces directly and keeps the diagnostic block readable. Both occurrences are converted; only the one reading from a here-string was reported, but the piped one has the same shape. Also restore master's wording of the build-tree artifact comment. An earlier edit inserted "in " ("not the install)" became "not in the install)"). It has no functional effect, but it was an unintended change to a line this branch has no reason to touch, and .ci/compile.sh now differs from master only by additions. * [CI] Ship the Qt module runtimes the Windows package check requires The installer check reports Qt6Concurrent.dll and Qt6ShaderTools.dll missing from the Windows package. Both are genuinely absent, not another comparison artifact - the manifest now matches 12 of 14 entries and the dual-list diagnostic shows the other two are not in the archive at all. Nothing deploys them. fixup_bundle copies only the DLLs it finds in Cockatrice.exe's import table, and the *.dll glob only sees what was already copied next to the executable. Qt6::Concurrent is linked but never imported, because QtConcurrent::run and QFutureWatcher are header-only in Qt 6, so the linker drops the import; Qt6::ShaderTools is skipped the same way. The package has shipped without them and the client still starts, but that is luck rather than intent, and required-qt-runtime.txt asks for both. Install the runtime of every linked module explicitly so the installer contains what the check demands. An unused DLL costs a few hundred kilobytes; a missing one is what stops the client starting after an update, and stays invisible until then. Derive both the manifest and the install list from the imported target's TYPE, so a statically linked Qt module - which ships no runtime at all - is skipped by each and the two can never disagree. Scope the manifest to the client rather than the union across server, client and Oracle: only the client is packaged on Windows, and the other two module lists are subsets of the client's, so this changes nothing today. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-02 15:15:29 +02:00
BruebachL	28d684f8aa	[Windows] Close running instances and purge stale runtime DLLs during update (#7308) ... * [Windows] Close running instances and purge stale runtime DLLs during update * [Windows] Scope running-instance handling to install dir and fix NSIS build - Drop !include nsExec.nsh: nsExec is a plugin DLL, not a header, so makensis aborts before NSIS can build the installer. - Match processes by image name and executable path under $INSTDIR via PowerShell, then close (WM_CLOSE) and force-stop only those PIDs, so an unrelated oracle.exe (Oracle DB) is never killed on a silent /R update. - Gate the stale-runtime-DLL purge on $INSTDIR\cockatrice.exe existing, so a first-time install can't recursively delete an unrelated Plugins directory. * [Windows] Make process detection rely on an explicit PowerShell exit code * [Windows] Fix exit-code detection in the uninstaller process check * [Windows] Pass the install dir to PowerShell without quoting pitfalls * [Windows] Fail closed when a process path is unreadable * [Windows] Only pre-check running instances for /R updates * [Windows] Wait on a wall-clock 60 s deadline instead of a loop counter * [Windows] Verify the force close and abort if the process survived * [Windows] Defer silent updates instead of force-killing the client * [Windows] Purge OpenSSL 3 DLLs on portable upgrades and broaden the stale-DLL guard * [Windows] Replace the GetTickCount macro with a direct System::Call * [Windows] Only close running instances whose path is readable CloseMatchingApps reused the fail-closed detection filter, which counts a process whose Path cannot be read (Access denied) as a match. The installer runs elevated, so CloseMainWindow() would then be delivered to an unrelated oracle.exe / servatrice.exe belonging to some other program, silently closing a third party application during a Cockatrice update. The set of processes we act on now has to be the strict one: a readable path under $INSTDIR. Unreadable paths are simply not ours. * [Windows] Match running instances by a readable path under the install dir The Path read in the Where-Object filter raises "Access is denied" for processes the installer cannot open, and both branches of the try/catch turned that into a match. Together with mapping every non-zero nsExec result to "running" this made the guard a hard stop rather than a fail-closed one: a machine with an Oracle database service (or a servatrice service) running as SYSTEM always has a process named oracle / servatrice whose path cannot be read, so every silent update aborted after 60 s and every interactive install re-asked for Retry indefinitely. A process whose path cannot be read is not one of ours - the updater is launched by the application it updates and therefore runs in the same user session, and an interactive install is elevated and can read the paths of the user's own processes. Both the detection and the close path now require a readable path under $INSTDIR, which is what the comment above the helpers already claimed. * [Windows] Distinguish "could not determine" from "definitely running" Mapping every non-zero nsExec result to "running" folds nsExec's "error" return (powershell.exe could not be started at all - removed, blocked by policy, refused by antivirus) into "Cockatrice is running". That state can never clear: closing applications does not help, so silent installs aborted after the full 60 s wait and interactive installs could not get past the Retry/Cancel prompt. IsAppRunning now reports three states (0 not running, 1 running, 2 could not determine) and a new IsProcessLookupAvailable preflight checks that powershell.exe can run at all. A broken PowerShell is reported to the user once - with a message box, since a silent install would otherwise show nothing - and the install continues instead of being blocked forever. Only a definite "running" is now waited for. * [Windows] Force-stop the console applications after the grace period Servatrice and Oracle are console applications, so CloseMainWindow() returns false and does nothing for them. Every silent update therefore waited the full 60 s and then aborted, and every interactive install looped on the Retry prompt, for any user running Servatrice out of the install directory. They now get a second shutdown path: once the grace period is over they are force-stopped by PID with the same strict install-dir filter, since they hold no unsaved user data. Cockatrice keeps the graceful-only treatment - a force-kill there could destroy an unsaved deck - and still aborts instead. * [Windows] Tell the user when a silent install or uninstall is aborted On the /R path the installer runs with SetSilent and SetAutoClose, so the DetailPrint before Abort went nowhere: the user clicks Help -> Check for Client Updates, the download finishes, Cockatrice closes its window, and nothing else happens - no update and no error, because the client launches the installer detached and never looks at its exit code. Every silent abort path now shows a message box telling the user which application is still open and that they should close it and run the installer again. The same applies to the silent uninstall, where the only output is a log file nobody reads. * [Windows] Treat leftover runtime files as an install marker for the purge The guard on the stale-DLL purge only looked for the three executables and uninstall.exe, so it skipped precisely the case the purge exists for: a previous failed update whose uninstaller removed what it could and silently skipped the Qt DLLs that a running instance had locked. None of the four markers is left in that directory, and the stale DLLs then survive into the new install. A leftover Qt6Core.dll (what we ship today) or the qt.conf written by a portable install now count as an install marker as well. * [Windows] Run the section instance check before any file is deleted Call EnsureAppsNotRunning sat after the portable-upgrade block, which had already deleted the old cockatrice.exe, Qt*.dll and plugins directory. An interactive install ("Portable mode" pointing at an existing portable folder) has $ReinstallMode = 0, so the .onInit guard is skipped and locked files were silently skipped - exactly the mixed-Qt-DLL state this change is about. The check now runs right after SetOutPath, before the first Delete/RMDir in the section. * [Windows] Guard the old install before the old uninstaller deletes files The interactive upgrade path removes the previous installation long before the install section: componentsPagePre runs the old UninstallString on the components page, i.e. before the directory page and before any call of ours can check anything. Every uninstaller shipped before this change has no un.EnsureAppsNotRunning, so for exactly the versions affected by #1576 the old files were deleted while cockatrice.exe was still running and the new installer had no say in it. componentsPagePre now runs the same check before both ExecWait calls. At that point $INSTDIR is still only the default, not the directory the old install lives in, so the new EnsureOldInstallNotRunning guards the location recorded in the registry instead. The helpers now work on a $GuardDir the caller picks; the normal entry points keep seeding it with $INSTDIR. * [Windows] Do not abort the section check past the point of no return "nothing has been replaced yet, so aborting just defers the update" only holds for the guard in .onInit. On the /R path AutoUninstallIfNeeded has already run the old uninstaller, which RMDir /r's the whole install directory, and the purge below it deletes the runtime files - so an Abort from the section would leave the user with the old version uninstalled and the new one not installed at all, which is strictly worse than the bug this change fixes. The ordering now guarantees the check already passed: .onInit guards the /R path before the uninstall, so the section only repeats it where that is not already true, i.e. for interactive installs, where nothing of this installer has been deleted yet and an Abort is the correct outcome. As a safety net for whatever the purge could not remove (a still locked file, or a check that could not run at all), HasStaleRuntimeFiles reports surviving runtime files with a message box - also on a silent update, where there is no other way to let the user know the install came out incomplete. * [Windows] Only block the in-app updater with a message box The message box on the silent abort would also fire for a plain /S install, which is exactly the unattended case: a package manager (or a CI job) running the installer with a leftover Cockatrice process would now hang forever on a dialog nobody can see instead of aborting. The box is therefore limited to /R, the path the in-app updater takes, where the user just clicked Help -> Check for Client Updates, the client launches the installer detached and never inspects its exit code, and the window is about to disappear - without a message, the update would silently not happen. Every silent abort also sets an error level now, so an unattended caller can see that the run failed instead of having to read the log. The silent uninstaller reports through log and exit code for the same reason: it is run unattended by the /R updater itself (QuietUninstallString) and by package managers. The installer that invoked it tells the user about the incomplete result itself. * [Windows] Treat an unset guard directory as undeterminable $GuardDir is set by the three entry points into the check, but it is now what decides whether a process counts as one of ours, and an empty string would match every process that merely shares an image name - the same false positive the strict path filter exists to avoid. Report it as "could not determine" instead of running the check, so a future caller that forgets to set it warns the user rather than closing or killing a third party process. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-09-27 20:05:41 +02:00
BruebachL	329a6ba94c	[Installer] Restore cockatrice:// and .cod registration in the Windows NSIS installer (#7355) ... Co-authored-by: user.email <Bruebach.Lukas@bdosecurity.de>	2026-09-24 20:50:34 +02:00
BruebachL	a5e94d8a4f	[Build] Keep Windows installs free of build-tree artifacts (#7316) ... * [Build] Keep Windows installs free of build-tree artifacts Several Windows packaging gaps could leak Visual Studio CMake build output into the installed application or the NSIS installer: - The per-app DLL sweep used ${CMAKE_BINARY_DIR}/${PROJECT_NAME}/${CMAKE_BUILD_TYPE}, which is empty on multi-config generators, collapsing the recursive DIRECTORY install into the whole build tree (containing *.dir, *_autogen, .qt, .qsb, x64, ...). Point it at the real per-config output with $<TARGET_FILE_DIR:...> and exclude build artifacts. - install(FILES ${OPENSSL_INCLUDE_DIRS} ...) tried to install OpenSSL include directories as files. CMake refuses this ("install FILES given directory"); it only slipped through CI because the vcpkg OpenSSL config leaves the variable empty. Remove it; fixup_bundle already ships the OpenSSL runtime DLLs. - The NSIS uninstaller only deleted *.exe/*.dll and a few known files, so build-tree leftovers survived an uninstall/reinstall cycle. Wipe the whole directory tree instead. - Add a Windows CI gate that lists the packaged installer with 7-Zip and fails the build if any build-tree artifact path is found. * Update .ci/compile.sh Co-authored-by: tooomm <tooomm@users.noreply.github.com> * [Build] Rework Windows installer artifact exclusions per review --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de> Co-authored-by: tooomm <tooomm@users.noreply.github.com>	2026-09-20 20:21:52 +02:00
BruebachL	e9bf1e6e46	[Theme] Add scheme-variant asset resolution (#7275) ... * Add scheme-variant theme asset resolution (#7209-1) ThemeManager::assetPath() and schemeVariantPath() resolve a theme asset to its scheme-variant file (prefix-light/dark.png) with fallback to the plain asset, and themePixmap()/loadBrush()/loadExtraBrush() use them. CSS files load style-dark.css or style-light.css when present. Home widget re-resolves its background on theme change. Link pixel_map_generator.cpp into the oracle target, which needs Qt6::Xml for QDomDocument. * Fix clang-format wrap of theme format probe lists --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-09-11 17:59:57 +02:00
BruebachL	14ecfff700	[Build] Add precompiled headers for Qt-backed executables (#7235) ... * [Build] Add precompiled headers for Qt-backed executables Reparsing QtCore/QtGui/QtWidgets/QtNetwork in ~460 client translation units is the dominant compilation cost. Precompile the two common layers: - qtcore_pch.h (Qt Core only; safe even for headless Servatrice) - qtwidgets_pch.h (adds Gui/Widgets/Network; used by Cockatrice and Oracle) target_precompile_headers() requires CMake 3.16, now the project minimum. Estimated 30-50% faster client rebuilds. * [Build] Format qtwidgets precompiled header clang-format include regrouping and a missing trailing newline. * [Build] Add PCH-aware ccache sloppiness config; format cmake/pch headers --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-09-05 19:40:36 +02:00
BruebachL	2b7b4e8168	[App] Add onboarding wizard (#7064) ... * [App] Add onboarding wizard Took 10 minutes Took 3 minutes Took 7 minutes Took 9 minutes Took 2 minutes Took 1 minute Took 7 minutes * Adjust CI Took 14 minutes Took 56 seconds Took 2 seconds Took 3 seconds * Adjust CI again Took 14 minutes Took 2 seconds * Comments and fixes Took 9 seconds Took 1 minute * Rebase. Took 5 minutes Took 50 seconds Took 15 seconds * Comments. Took 7 minutes * CI lol Took 3 minutes * CI again lol Took 4 minutes * Drop some settings, add some new ones. Took 19 minutes * Resize when expanding section Took 4 minutes Took 3 minutes Took 7 minutes --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-08-24 23:05:58 +02:00
BruebachL	c4316c40e9	[CI] Remove Qt5 (#7071) ... * [CI] Remove Qt5 Took 10 minutes Took 9 minutes * Revert CI failure and fix up comments Took 4 minutes --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-08-08 22:04:50 +02:00
BruebachL	59d90db3c7	Define Cockatrice as an editor/handler for .cod files and cockatrice:// protocol on all platforms (#6775) ... * [Application] Add single instance guard and mime types. Took 2 hours 39 minutes Took 18 minutes Took 5 minutes Took 12 seconds Took 11 seconds * Rework Took 30 minutes Took 50 seconds * Only enforce single instance if launched with arguments. Took 5 minutes * Prototype intents Took 53 minutes Took 6 seconds * Connect/disconnect and join game/room intents. Took 3 hours 14 minutes Took 2 seconds Took 15 seconds * Fix include. Took 1 minute Took 23 seconds Took 2 seconds * Mac handling. Took 10 minutes Took 12 seconds Took 3 minutes * Lint. Took 3 minutes * Rebase. Took 3 minutes Took 17 seconds * Implement UrlSchemeEventFilter Took 10 minutes Took 7 seconds * Qt Moc Took 3 minutes * Modern PList. Took 21 minutes Took 1 minute * Debug output. Took 6 minutes Took 19 minutes * Watch file:// prefix. Took 15 minutes Took 7 seconds * Better handler. Took 6 minutes * Don't store reference in member Took 5 minutes * Move impl to cpp, fix lifetime issues. Took 11 minutes Took 2 minutes * Better single-instance handoff, url intent harded copy game link context-menu Polish for installers Took 35 minutes Took 8 seconds --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-08-08 19:02:19 +02:00
BruebachL	dfbe944c31	[App][Windows][NSIS] Use QProcess::setNativeArguments on Windows, properly order portable detection (#6989) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-06-15 15:23:18 +02:00
SlightlyCircuitous	6cace2a8e6	Bump minimum required cmake to 3.10 in gtest (#6851) ... * Bump minimum_required to 3.5 and GoogleTest to 1.12 GoogleTest 1.12 is the oldest version that sets cmake_minimum_required() to 3.5 in the CMakeLists files it provides * code style changes * Use 1.17.0 * Set minimum to 3.10 to make top-level CMakeLists * New hash Co-authored-by: tooomm <tooomm@users.noreply.github.com> * Update cmake/gtest-CMakeLists.txt.in Co-authored-by: tooomm <tooomm@users.noreply.github.com> --------- Co-authored-by: tooomm <tooomm@users.noreply.github.com> Co-authored-by: ebbit1q <ebbit1q@gmail.com>	2026-05-09 00:05:10 +02:00
ZeldaZach	0e014c0e5c	Use dash instead of underscore	2026-05-08 10:13:40 -04:00
ZeldaZach	511ccae738	Replace spaces with underscore for release name file names	2026-05-08 10:10:39 -04:00
BruebachL	682ac4ed0c	Add -R option in Windows NSIS script for silent upgrade (#6818) ... * Add -R option in Windows NSIS script Took 23 minutes * Small fix. Took 3 minutes --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-04-19 01:07:38 +02:00
ebbit1q	f97864b72b	set the minimum qt6 version to 6.4 (#6811) ... * set the minimum qt6 version to 6.4 this will be separate from the qt5 removal after release * add include for optional	2026-04-14 00:59:46 +02:00
DawnFire42	ce652de272	Fix/cmake test only build (#6709) ... * fix(cmake): guard filter_string_test behind WITH_ORACLE or WITH_CLIENT. filter_string_test links against libcockatrice_filters, which is only built when WITH_ORACLE or WITH_CLIENT is enabled. Without this guard, test-only builds fail at configure time because the target doesn't exist. The guard condition mirrors the one in the root CMakeLists.txt that controls whether libcockatrice_filters is built. * fix(cmake): centralize TEST_QT_MODULES in FindQtRuntime.cmake Each test CMakeLists.txt was independently defining TEST_QT_MODULES with its own subset of Qt modules. This duplicated knowledge that already lives in FindQtRuntime.cmake (which handles module discovery for all other targets: SERVATRICE, COCKATRICE, ORACLE). Consolidate into a single definition using the union of all test requirements (Concurrent Network Svg Widgets), matching the existing pattern for application-target modules. This ensures test-only builds (-DTEST=ON without application targets) discover all necessary Qt components. * fix(cmake): guard libcockatrice_network behind application targets. libcockatrice_network is only needed by the client, server, and oracle targets. Other application-specific libraries (settings, models, filters) already have similar guards. This was an oversight that caused test-only builds to fail when network dependencies weren't available.	2026-03-15 17:24:50 +01:00
tooomm	14f1925edc	Add icon to exe (#6655)	2026-03-06 01:50:15 +01:00
RickyRister	70f9982c29	Bump minimum Qt version from 5.8 to 5.15 (#6442) ... * Bump minimum Qt version from 5.8 to 5.15 * remove version check * remove version checks	2025-12-23 09:58:23 -08:00
BruebachL	7f1d891e26	[Deprecation] Remove DBConverter from sources. (#6431) ... Took 10 minutes Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2025-12-20 15:25:13 +01:00
BruebachL	f24c36d6b1	Core qt module for libs (#6278) ... * Move logger and key signals from libcockatrice_utility to Cockatrice. Took 9 minutes * Only link Qt::Core instead of COCKATRICE_QT_MODULES to libraries, if possible. Took 2 minutes --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2025-11-05 18:51:08 +01:00
RickyRister	95cea0f191	Add custom server-side pawn colors (#5543)	2025-02-02 03:25:25 +00:00
Zach H	d3a1538af3	Fix Windows Crash Reporter (#5493) ... * Fix Windows Crash Reporter * Fix NSIS template	2025-01-18 02:23:05 +00:00
ZeldaZach	a12c4ee909	Fix MacOS Builds for Non-Main Repo PRs	2025-01-11 21:21:11 -05:00
Zach H	2b3c47148e	GHA MacOS Only Sign/Notarize if self repo (#5437)	2025-01-10 16:46:05 -05:00
Zach H	2194430019	Sign macOS Releases (#5396)	2025-01-09 22:32:53 -05:00
Zach H	2ff99f12d8	Require Admin Permissions to install Cockatrice Windows (#5383) ... Fix #5382	2024-12-29 16:22:39 +00:00
Zach H	2bd06ff0fd	Add CrashDump support for Windows OS (#5282)	2024-12-21 18:52:07 +00:00
Zach H	50274cb66d	Change 'custom(VER)' to 'custom-VER' because Fedora mad (#5180)	2024-11-22 22:22:22 -05:00
tooomm	872c92a244	CI: Use windows-2022 image with Visual Studio 17 2022 (#4999) ... Co-authored-by: ZeldaZach <zahalpern+github@gmail.com>	2024-05-13 17:41:50 -04:00
Zach H	b0470ab678	Move to OpenSSLv3 (& Drop 32-bit) (#4883)	2023-10-01 17:19:31 -04:00
SlightlyCircuitous	5f0ab2a177	CPack DMG Installer with Background Image (#4787) ... * Set some CPack variables WIP for DMG background image * Use a .tif for background * Add Background image and DS_Store script Script is from https://www.kitware.com//creating-mac-os-x-packages-with-cmake/ with cmake.app changed to cockatrice.app * Add position for all icons * Adjust background size and icon position This draws dbconverter off the screen as a hack to hide it, so hopefully it doesn't break. * Add files via upload * Change Icon Position Icon position is probably relative to the window edge, not the edge of the screen so the numbers should be lower. * Adjust Icon Position and Window Boundaries Applescript seems to use the center of the icon rather than the left corner so the coordinates need to be adjusted by 64 px. The finder window counts the 22 px of the title bar in the window size so 22 must be added to the fourth coord of position to fit the entire image. * Fix spelling of Servatrice * Satifsfy Code Style * Use vector format (eps) * Delete background.tif * Use vector format (eps) * Use the right file extention in the script * Point to svg * Use svg * Add svg for background image * Delete background.eps * Use plain SVG, adjust text * Move applescript to /cmake * Move background to /cmake * Point CPack to /cmake background and applescript now reside there * Revert to .tif * Use compressed .tif * Use more specific file name * Script expects .background:background.tif	2023-04-29 23:13:01 -04:00
Zach H	ba35a11e82	Find OpenSSL on Windows (#4730)	2023-02-07 16:47:50 -05:00
ebbit1q	dec2a252fa	remove dependency on deprecated qt5 libraries for qt6 (#4692) ... * remove dependency on deprecated qt5 libraries for qt6 removes the use of qt6-5compat for builds replaces use of QRegExp with QRegularExpression fixes incorrect usage of QRegExp removes use of QTextCodec fixes incorrect usage of QTextCodec sets qtlinguist as a required component for qt6 * fix anchoredPattern not existing in qt 5.11	2022-10-31 23:24:11 +01:00
tooomm	54b7943d17	CI: Update Qt setup on Windows (#4654) ... * use new internal caching * Update desktop-build.yml * Update desktop-build.yml * Update desktop-build.yml * use newest patch version jurplel/install-qt-action#version * python not needed * Update desktop-build.yml * Update desktop-build.yml * Update desktop-build.yml * Update desktop-build.yml * Update desktop-build.yml * install openssl via tools * add $RUNNER_WORKSPACE location Source: https://www.theserverside.com/blog/Coffee-Talk-Java-News-Stories-and-Opinions/environment-variables-full-list-github-actions * Update FindWin32SslRuntime.cmake * Update FindWin32SslRuntime.cmake * Update FindWin32SslRuntime.cmake * Update FindWin32SslRuntime.cmake * Delete download_openssl.sh * cleanup * [skip ci] improve short-circuit evaluation comment * restructure	2022-09-01 02:38:25 +02:00
ebbit1q	28aa473362	rework formatting with cmake-format (#4627) ... * merge clangify and cmakify into format.sh update desktop lint workflow to 22.04 print cmake-format version as well um, rename things? add extra examples to format.sh --help add option to not run clang-format fix version display in .ci/lint_cpp.sh fix relative paths in format.sh fix formatting dirs * run ./format.sh --cmake --branch "" * revert formatting of cmake comments	2022-06-08 21:14:26 -04:00