trusted_sources was checked with QString::contains. A dual-stack listener
reports a local proxy as ::ffff:127.0.0.1, which never matches the default
"127.0.0.1,::1". Behind nginx the forwarded client IP header was then
ignored, every websocket user shared the proxy's address, and logins
failed with "too many concurrent connections" once max_users_per_address
was reached.
Add isTrustedSource(), which parses each entry as a QHostAddress and
compares exact addresses with IPv4-mapped addresses normalized, and use it
at all four call sites. The ban command also read server/trusted_sources
instead of the documented security/trusted_sources; it now uses the same
getter. Entries that are not IP addresses are logged at startup since they
no longer match anything.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* [Security] Add challenge-response auth with scrypt verifiers and stop storing plaintext passwords
Challenge-response authentication: the client derives a scrypt verifier
(RFC 7914, EVP_PBE_scrypt, N=32768, r=8, p=1) and authenticates with
HMAC-SHA256(key, nonce), so neither the password nor its hash is
transmitted. The stored format becomes
"$scrypt$<n>$<r>$<p>$<salt>$<verifier>" and Response_PasswordSalt
now carries the cost parameters. Strict servers only accept scrypt
verifiers; legacy accounts are migrated after a successful login.
Fix#344 for challenge-response servers: a saved profile stores the
derived verifier under the password key instead of the plaintext password.
The connect dialog loads it without revealing it, autoconnect passes it
through, the change-password dialog no longer prefills the old password
field with it, and the client only persists the verifier when
"Save password" is checked.
Took 3 minutes
Took 1 minute
Took 10 seconds
Took 7 minutes
* [Security] Harden credential format acceptance and challenge nonce validation
* [Security] Refuse KDF downgrade; trim profile name and warn on silent credential drop
* [Security] Add SupportsAll ServerOptions enumerator to fix enum validation assert
The server advertised both SupportsPasswordHash (1) and
SupportsChallengeResponseAuth (2) via a bitwise-OR that produced the
value 3, which no enumerator declared. Protobuf's proto2 enum
validation rejects the value in _internal_set_server_options, crashing
servatrice on the debug assertion. Add a SupportsAll = 3 enumerator with
an identical wire value so the bitmask reads unchanged while the value
is now a documented, valid member of the enum.
* [Security] Normalize username when issuing challenge nonce
cmdRequestPasswordSalt bound the challenge nonce to the raw, un-simplified
username while cmdLogin verifies it against the simplified name. A user
who typed leading or trailing whitespace in the username box would be
silently rejected during challenge-response login even with the correct
password. Simplify at the nonce-issuing site so both commands agree on
the normalized name.
Also drive-by formatting: collapse the now single-expression
serverOptions initializer onto one line.
* [Security] Keep an encrypted legacy password backup for old-client logins
Migrating an account to scrypt stranded pre-challenge clients, which can
only present the legacy salt+hash: after migration the server served them
a scrypt salt they cannot use, so the only recovery was a password reset.
When security/legacy_backup_key is configured (64 hex chars,
openssl rand -hex 32), submitPasswordVerifier now seals the legacy
credential with AES-256-GCM under that key before overwriting the row,
storing it in password_legacy_backup with the time it was last used. Old
clients keep working: cmdRequestPasswordSalt serves the backup's 16-char
salt in password_salt so they can derive the legacy hash they were
always able to compute, while new clients derive the verifier from the
new scrypt_salt field, which always carries the verifier salt. The
non-challenge login path accepts the plaintext or legacy hash against
the decrypted backup and refreshes its window; a migrated row with no
usable backup fails closed.
Backups age out so a database dump taken after the window closes never
carries a crackable legacy hash: getUsableLegacyBackup purges on first
use past security/legacy_backup_ttl_days (default 90, clamped 1..3650),
and a six-hourly sweep drops backups idle accounts never touch.
changeUserPassword clears the backup since a new credential invalidates
it. Without a configured key nothing is sealed or purged, so a
temporarily missing key cannot destroy existing backups.
The AAD is the simplified user name on both sides, sealing the blob to
its row so it cannot be moved between accounts. Sealing failures
degrade to the previous lockout behaviour rather than blocking
migration. The columns extend the unmerged 0036->0037 migration, so the
schema version stays 37.
* [Security] Address review: proto compat, plaintext verify, AAD case, strict scope
Fix the two blockers and follow-ups from the 2026-10-16 review:
- Advertise challenge-response in a new supports_challenge_response
field instead of the ServerOptions enum and drop SupportsAll:
proto2 enums are closed, so already-released clients parsed
server_options = 3 as NoOptions and fell back to plaintext
passwords. server_options stays exactly SupportsPasswordHash
on the wire; old clients ignore the new field.
- Verify a plaintext password directly against a migrated scrypt
row with verifyPassword() so email changes (cmdAccountEdit)
and old clients sending password keep working without a
legacy backup key. Pre-hashed values are still checked
against the backup, and its TTL window is refreshed only
when the backup is what actually matched.
- Use the stored row name as the AES-GCM AAD on both seal
and open so a login whose case differs from the stored
name (utf8mb4_unicode_ci) still opens its backup.
- Require challenge-response in strict mode only for
registered SQL accounts (userExists gate), leaving
guest/unregistered logins and none/password auth
methods unaffected.
- Document in servatrice.ini.example that a captured
legacy hash can take over a not-yet-migrated account
and that strict only constrains registered SQL
accounts. Schema version is 38.
* [Security] Raise legacy backup TTL default to 180 days
Gives operators and slow-to-upgrade users a longer downgrade
window for pre-challenge clients before unused encrypted
legacy password backups age out.
* [Security] Fix servatrice.cpp formatting per clang-format-18
* [Security] Add missing forward declaration for Command_SubmitPasswordVerifier
The cmdSubmitPasswordVerifier declaration references the proto-generated
type, which otherwise does not name a type in this header and breaks
every C++ build.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Co-authored-by: BruebachL <bruebachl@cockatrice.example>
* [Server] Gate room channels on privilege levels
* [Server] Filter channel catalog per user, split read/write gating, add banners
- Server_Room::getInfo() now takes the requesting user and only lists
channels that user may read. Previously every room member received the
full catalog (e.g. the moderators channel) while message delivery was
already gated, so restricted channels were visible but silent.
- Split channel access into mayReadChannel/mayWriteChannel: history
replay, catalog listing, and event fan-out use the read level
(access_level); Command_RoomChannelSay uses the write level
(write_access_level, falling back to the read level when unset).
- Plumb write_access_level and banner_message through both room sources
(SQL rooms_channels table and config-file channels via writeaccess
and banner keys).
- Schema 38 -> 39: add write_access_level (NULL means inherit the read
level) and banner_message columns; also widen access_level to the
full six-value privilege enum to match the 37 -> 38 migration.
* Fixup: evaluate channel access per user flag instead of ladder
User flags are independent bits: IsDeveloper does not imply
IsModerator/IsAdmin, so developer-only users must not reach
moderator/admin channels. Replace the userPrivilegeLevel ladder with
hasChannelPrivilege: moderator channels need IsModerator (admins hold
it alongside IsAdmin), admin channels need IsAdmin, developer channels
need IsDeveloper or IsAdmin, judge channels admit IsJudge/IsModerator.
Covers catalog filtering, history replay, write gating and fan-out,
and corrects the ini example and proto docs.
* [Server] Make channel privilege helpers static per review
* [Server] Fail closed on unknown channel access levels per review
- roomChannelAccessFromKey returns nullopt for unknown keywords
instead of silently falling back to Public
- skip channels with unknown read/write levels with qWarning, empty
read defaults to Public, empty write means no override
- mayWriteChannel now also requires read access so write-below-read
configs cannot post into invisible channels
* [Server] Remove stray conflict marker in channel replay comment
* [Server] Fix servatrice.cpp formatting per clang-format-18
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Co-authored-by: BruebachL <bruebachl@cockatrice.example>
* [Server] Add room chat channels with per-channel fan-out and history
* Fixup: redact all channel histories on message removal
removeSaidMessages only redacted the main history, so banned/warned
content stayed visible to late joiners on every other channel.
Drop the unused channelId parameter and redact up to amount messages
per channel across the whole channelChatHistory map.
* [Server] Validate room channel ids and fix catalog schema per review
- servatrice.sql: expand rooms_channels access_level enum to full set
to match 0037->0038 migration
- servatrice.cpp: skip empty, reserved (__main__) and duplicate channel
ids when loading from ini and DB with qWarning
- server_protocolhandler.cpp: clarify catalog replay comment (filtering
happens in moderator stack)
- server_room: drop duplicate channelIndex, linear search preserves
catalog order
* [Server] Fix server_room.cpp formatting per clang-format-18
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Co-authored-by: BruebachL <bruebachl@cockatrice.example>
* [Security] Add per-address rate limiting for auth endpoints
Introduce a thread-safe RateLimiter that tracks attempts per key
(IP address) within a sliding time window, and wire it into the
authentication endpoints:
- Login: failed login attempts from an address are counted; once the
configured maximum is exceeded within the window, further logins
from that address are rejected with RespTooManyRequests. A
successful login clears the failed attempts for that address.
- Registration: implement the previously stubbed
tooManyRegistrationAttempts, limiting how many accounts can be
created per address per window.
- Forgot-password: throttle both the email-request and the
email-challenge paths per address.
New [security] settings with defaults:
max_login_attempts_per_ip=5 / login_attempt_window_seconds=900
max_registrations_per_ip=2 / registration_window_seconds=3600
max_forgot_password_requests_per_ip=3 / forgot_password_window_seconds=3600
Adds unit tests for the RateLimiter (window limit, over-limit
blocking, clearing, per-key independence).
Took 3 minutes
* [Server] Fix rate limiter: disable semantics, draining window, bounded keys, pre-work login gate
- recordAttempt()/isBlocked() return false when maxAttempts <= 0 or windowSeconds <= 0, so the documented 'set to 0 to disable' actually disables instead of blocking every address permanently
- Keys at their limit are rejected without recording, so repeated attempts at the attacker's pace cannot keep sliding the window and holding the lockout open; a block now clears once the recorded attempts age out of windowSeconds
- Attempts map is bounded: an opportunistic prune (every 60s) erases keys whose attempts have fully aged out
- Login is throttled before the work: isLoginRateLimited() (a new virtual on Server, backed by isBlocked()) gates loginUser(), so a locked-out address no longer burns a database round trip and password verification per attempt
- recordAttemptAt()/isBlockedAt() time seams make the sliding-window behaviour deterministically testable; tests rewritten for the real semantics (no reliance on the maxAttempts=0 bug, no sleeps)
* [Server] Inform client of login/registration rate limit timeout
- Add retryAfterSeconds/retryAfterSecondsAt to RateLimiter to compute
seconds until oldest attempt exits the sliding window
- Expose loginRateLimitRemainingSeconds via Server/Servatrice
- Include denied_end_time (absolute epoch) in RespTooManyRequests for
login pre-auth and when transitioning to lockout after failed attempt
- Include denied_end_time in registration rate limit response
- Client: show retry time for login RespTooManyRequests
- Client: simplify registration RespTooManyRequests message to show
retry time when provided
- Add test for retryAfterSecondsAt
* [Client] Restore registration guidance and drop duplicated rate limit reason
The registration RespTooManyRequests case now only shows the retry-after
copy when the server actually sent a denied_end_time; the per-email account
cap path (no end time) falls back to the previous guidance about already
having an account and contacting the server operator.
Drop the canned denied_reason_str from the new login rate limit branches so
the client no longer prints the same sentence twice.
* [Server] Exempt trusted_sources from auth rate limits
Addresses in security/trusted_sources bypass per-address limits, matching
the existing max_users_per_address bypass in initSession. Without this,
Webatrice behind local nginx (all clients as 127.0.0.1) would lock out
every web user after 5 mistyped passwords, and cap the whole server at
2 registrations / 3 forgot-password requests per window.
Adds Servatrice::isRateLimitExempt helper; recordFailedLogin,
isLoginRateLimited, recordRegistrationAttempt and
recordForgotPasswordAttempt all check it.
# Conflicts:
# servatrice/src/servatrice.cpp
* [Server] Key login rate limit by (address, username)
A successful login cleared the whole per-IP failure history, so 4 bad
guesses plus 1 self-login (or guest UnknownUser login) from the same
address bypassed the limiter. Failures are now bucketed per
(address, lowercase username) and a success clears only its own pair.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [SMTP] Add reliable email delivery with retry and database-backed queue
Rework the SMTP client from fire-and-forget sending into a persistent
queue with exponential backoff and per-message retry budget, backed by
the existing database rows as the durable source of truth.
- Keep pending emails in an in-memory queue with attempts/backoff
tracking; enqueue without deleting database rows, and only remove the
row once delivery is confirmed via the mailDelivered signal.
- Add exponential backoff (doubling, capped at 30 min) between delivery
attempts, bounded by new smtp/maxretries and smtp/retrydelay settings.
- Track connection-layer failures (connect/auth/encrypt) with their own
backoff; route failures to recordFailed/recordConnectionFailure so
undeliverable mail eventually drops from the queue instead of
retrying forever.
- Treat rejected recipients/senders as permanent failures.
- Rebuild the SMTP buffer from the authoritative queue before each send
via a new QxtSmtp::reset() so reconnects never duplicate deliveries.
- Start the idle timeout after authentication, not on TCP connect, so
slow SSL/STARTTLS handshakes are not cut short.
* [SMTP] Fix retry accounting, backoff reset, and token dedupe
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
- TCP client connections: reject messages whose declared length is
negative or exceeds a 1.5MB cap immediately instead of buffering
indefinitely, preventing unbounded memory growth and the previously
stuck state caused by negative lengths overflowing the int header.
- ISL connections: apply the same length validation with a 4MB cap,
disconnecting the peer on an implausible length.
- Websockets: only trust the forwarded client-address header (e.g.
X-Forwarded-For) when the websocket connection originates from an
address in security/trusted_sources. Previously any client could
spoof its address to bypass bans, user limits and rate limiting.
Took 3 minutes
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Server] Instrument command processing, game starts, and event loops
Add a lock-free MetricsRegistry that accumulates per-command processing
times in preallocated histogram slots (one per protobuf command type,
bucketed at 1/5/10/25/50/100/250/500/1000/2500/5000 ms +Inf). The
hot-path observeCommand() uses only relaxed atomic adds — no locks,
no allocations, no cache-line ping-pong beyond the unavoidable counter
updates.
Wire the registry into AbstractServerSocketInterface::processCommandContainer()
so every processed command is attributed with its container's wall-clock
time. When a container exceeds metrics/slow_command_ms (default 500),
a warning is logged including the connected username.
Add an EventLoopWatchdog heartbeat that runs on every socket pool thread.
If a heartbeat overshoots metrics/stall_warn_ms (default 2000 ms), the
overshoot is recorded in atomic counters and a warning is logged. Both
thresholds are configurable in servatrice.ini; setting stall_warn_ms to 0
disables the watchdogs entirely.
Track game-start durations via a separate histogram in MetricsRegistry.
Server_Game::startGameNow() measures the time from zone creation through
player materialization and reports it via Server::observeGameStartDurationMs().
Add a live card-count gauge: Server_Game exposes getCardsInGame() and
Servatrice::getCardsInGamesTotal() sums across all running games under
the appropriate read locks.
Include a standalone metrics_registry_test (Google Test) that validates
empty registries, single/multi-sample histograms, kind encoding,
overflow-slot collapse, negative-duration clamping, gauge rendering,
and the game-start histogram separation.
Took 10 minutes
* [Client/Server/Protocol] Surface live metrics in the Developer tab
Extend Response_GetServerStats with live counters from the in-process
MetricsRegistry: cards in games, event loop stall totals/worst,
total commands processed, average command time, active command types,
and game-start count/duration. Add a repeated CommandStats message
carrying per-command breakdowns (kind, extension number, resolved
protobuf name, count, total ms) for every type that has seen at
least one sample.
Server-side cmdGetServerStats() populates all new fields after the
existing DB uptime snapshot query, resolving protobuf extension names
via the descriptor pool for human-readable labels like
session/Command_Ping.
Expand TabDeveloper with two tables: an overview section (existing
DB stats plus the new live metrics) and a per-command breakdown table
(Command / Count / Total ms / Avg ms) sorted by total_ms descending
so the hottest commands surface first.
Took 55 minutes
Took 47 seconds
* [Server] Drop dead Prometheus histogram, add developer command metrics, fix watchdog init order
- metrics_registry: remove toPrometheusText/appendCumulativeBuckets and the time-bucket histogram that nothing in production ever emitted (the future /metrics exporter can bring it back); keep counts/totals read by the Developer tab
- Fix +Inf bucket routing that never incremented, and its test that locked the bug in
- Instrument developer_command container (kind 6) in processCommandContainer and stats label resolution
- Read metrics/{slow_command_ms,stall_warn_ms} at the top of initServer() so stall_warn_ms=0 disables the watchdogs before pool threads start
- Shrink KindStride to 1280 (largest extension in use is 1206) with a static_assert; document scrape cost of getCardsInGamesTotal; note slow_command logging has no rate limit in servatrice.ini.example
* [Tests] Give metrics_registry_test an explicit main
* [Server] Record only the dispatched command family; drop unused totals
processCommandContainer recorded every family in a container even though
the base if/else-if dispatch processes at most one. An unauthenticated
client could batch a session command (login) with fabricated developer,
moderator, and admin entries and forge genuine-looking samples that were
never executed or authorized. Mirror the base's selection, skip when the
handler was already deleted, and skip entries whose extension number is
-1 (which would otherwise wrap into the previous kind's id range).
[Server] Drop dead process-lifetime byte/uptime counters
txBytesTotal/rxBytesTotal added an atomic RMW to every socket write and
read for counters nothing consumes (cmdGetServerStats fills tx_bytes,
rx_bytes, and uptime_secs from the DB snapshot). Remove the two atomics
and the getTxBytesTotal/getRxBytesTotal/getUptimeSeconds getters; the
incTxBytes/incRxBytes slots and mutexes remain for the ISL legacy
counters.
[Protocol] Document kind 5 as developer in CommandStats
NumKinds is 6 and the server emits kind_index = 5 for developer
commands; the comment stopped at 4.
* [Client] Togglable auto-refresh for Developer stats tab
* [Oracle] Fix clang-format alignment of card type priority list
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Server/Client/Protocol] Reporting users + moderation queue functionality
Took 6 minutes
Took 3 minutes
Took 8 seconds
Took 11 minutes
Took 12 minutes
Took 7 minutes
Took 15 seconds
Took 2 minutes
Took 1 minute
Took 30 seconds
Took 16 seconds
* CI Fix
Took 6 minutes
* CI Fix
Took 6 minutes
* [Protocol] Add moderation investigation commands
Adds the protocol layer for the moderation investigation suite:
- Command_GetUserSessions/GetUserAlts/GetModeratorLastLogins/ResetUserPassword/RemoveUserAvatar (1013-1017)
- Response extensions 1215-1219 with ServerInfo messages for sessions, alts, and staff logins
- last_login on Response_ReportUserInfo and warning_il on Response_WarnList
Took 2 minutes
* [Utility] Add warning categories parser with infraction levels
Parses the server's 'officialwarnings' setting (comma-separated, optional
'|IL' suffix) into WarningCategory structs so the client can display the
infraction level of each warning category. Includes GTest coverage.
* [Server] Add moderation investigation tools
Implements the server side of the moderation suite:
- getUserSessions/getUserAlts/getModeratorLastLogins/removeUserAvatar DB methods
- Handlers for all five new commands with audit records (PASSWORD_RESET,
REMOVE_USER_AVATAR); password resets return a generated temporary password
- cmdGetWarnList now reports per-category infraction levels from the
officialwarnings setting; cmdReportUserInfo reports last_login
- Update servatrice.ini.example with the warning taxonomy
- Password/avatar mutations report RespNameNotFound when the user does not exist
* [Client] Add moderation tab with investigate, password reset, and avatar removal
- New Moderation tab: search a user to show account info, alternate
accounts, login sessions, and staff last logins; actions to reset the
user's password (shows the generated temporary password) and remove the
user's avatar
- 'Investigate user' entry in the user context menu opens the tab pre-loaded
for that user
- Warning dialog shows the infraction level of each warning category
- Tab wired into TabSupervisor with a moderator-gated menu action, shortcut,
and tabs.ini persistence (default closed)
* [Server/Client/Protocol] Address PR #7091 review: security, bug, and perf fixes
Security:
- Promote RESET_USER_PASSWORD to admin-only dispatch (was moderator-accessible)
- Reject password reset on users with equal/higher privilege than caller
- Notify affected user via Event_NotifyUser::CUSTOM when password is reset
- Add server-side category whitelist for reports
- Drop reporter name fallback in comment/details authorization (ID-only)
- Force password change: new DB column + login enforcement + client disconnect
Bugs:
- XSS via QTextEdit::append() → insertPlainText() in report tab and utils
- allNotified initialized to true even with empty recipients list
- Warning combo box: use currentData() instead of baked-in display text
- Report resolution now records who resolved (resolved_by column + audit)
Performance:
- IP-correlation subquery: add 6-month window + LIMIT 200
- getUserSessions: clamp limit to 500
Non-blocking:
- Palette-aware colors in report_utils.cpp (dark/light mode)
- Report list pagination: offset/limit fields + total_count in response
- SessionCommand enum gap comment for reserved values 1201-1203
Schema: 36→37 (force_password_change), 37→38 (resolved_by)
Took 12 minutes
Took 16 seconds
* Fix macOs pedantry
Took 5 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Support registration domain whitelist (registration/emailproviderwhitelist) that, if set, will require a user to have an email with one of the specified domain providers. Will require client updates to see the Whitelist message, otherwise they'll be greeted with a default alert.
This also works to remove the pain of Google Email addresses and their infinite combination of usernames for the same account (i.e. remove periods and everything after the first plus sign).
* Make blacklist response show custom dialog
* refactoring
* allow for creation of games as spectator
allow setting the amount of games per user to none
remove limit on amount of games when creating a game as judge as
spectator
* refactor common/server_player.cpp
* do not close games with spectating host automatically
* remove check that filters out 0 player games
this check didn't really do anything, deleted games are removed before
it would be reached
* don't transfer host to spectators
this seems to cause a bug, also present on master
* Some improvements to Servatice network code
1. fix crash on fuzzy connection (tcp server only)
2. ensure websockets are parent()ed to avoid leaking them
3. quick catch disconnect()ed sockets instead of waiting for a socket error to happen
4. supporto mulltiple connection pools on the websocket server; they are still bound to the same thread due to a qt5 limitation.
* Added few unsigned to ints in order to get rid of warnings.
Added column to users table, for when password is changed(issue#3015).
Moved password length check to separate method, to make it cleaner.
* Added migration file and changed schema version to 27 due to servatrice.sql schema modification.
* Make password length configurable.
* Added VIP only room
* Added DONATOR room.
* Extended Room to include privilege level.
* Updated room join logic
* Updated server tab permissions column display based on perm+privlevel definitions
* Fixed new client -> old server blank permissions column on server tab
Added the ability for registered user - VIP/DONATOR/PRIVILEGED room.
* Creating of server side audit table for auditing actions such as password resets, account registrations and log queries.
* Add migration script
Add migration script for database
* Update database script
Update database script to reflect new audit table
* Creating of server side audit table for auditing actions such as password resets, account registrations and log queries.
* Add migration script
Add migration script for database
* Update database script
Update database script to reflect new audit table
* Corrected results column possible value(s).
* Fixed migration script.
* Added boolean audit logic
Added enable/disable audit options
Added audit functionality for forgot password
* Added registration auditing
Added registration auditing
* Updated ActivateAccount Function
Created clientid variable and used it in preporation for future
potential protocol expansion.
* Extended activation protocol
Added clientid to activation command protocol
* Typo correction
Fix typo's
* Missed type fix
Found the infamous E!
* Updated database function syntax
Updated if/else syntax in db add audit function
* Untabify content
Untab files changed in PR
* Added registration email blacklist
Added the ability to define email blacklist for user registration. Now
server operators can prevent users from registering accounts that
contain providers they do not wish users to use.
* Update ini option for clarity
Updated servatrice ini option name for clarity.
* Updated description for clarity
Added implicit explination
* Add ability to limit number of account registrations with same email address
This commit adds server side functionality that will allow operators to
limit the number of accounts that can be registered to the server with
the same email address.
* Updated ini wording
Updated configuration file wording for better description.
Fix#1881
This change allows the server operator to enable or disable the internal
SMTP client that sends activation emails. With this new configuration
option server operators can choose to require email activation yet use
an external method of account verification and/or account token
notification.
* Add enable/disable log query functionality
This change adds the ability for server owners to allow log querying
from inside the client. In the event the functionality is not allowed a
result is returned indicating the functionality is disabled.
* Added translation
Added the ability for the disabled messages to be translated.
* Server side idle timeout
Initial commit for server side idle timeout counter. This adds a new
int value that is updated when room/game/mod/admin commands occur and is
checked during the regular ping timout function that if the users new
"idle" value exceeds the idleclienttimeout value defined in the servers
configuration file the user is logged out. The user will receive a
warning at the 90% time frame mark about being idle.
* Use round instead of ceil
Travis fix for older xcode issue's.
* Fixed requested items
Mis-spelleed function, added header, added warning message sent check
value. Also corrected the protobuf declaration file for
event_notifyuser
* Moved bool to protected
* Re-Ordered Declarations
* Removed most stylistic items
Resolved most noted things.
* Remove client side idle timeout
Removed client side idle timeout functionality
* Add `disallowedwords` setting and perform check
Check if any of the words in `disallowedwords` are contained in the username. If
so, return false like other checks.
NOTE: Needs testing for advanced bugs.
* Remove "administrator" from `disallowedwords`
"administrator" contains "admin" anyway, so it is not needed.
* Add error message if username contains a disallowed word
* Add `disallowedregexp` setting and perform check
Check if each expression in `disallowedregexp` exactly matches the username. If
so, return false.
TODO: Add specific error to dialog in `window_main.cpp`.
* Add error message for username matching RegExp
* Fix indentation
* Compile `disallowedregexp` into a QList upon initialization
Reduces system load with each registration request.
* Clean up `isUsernameValid` function
* Fix indentation
* Add backwards compatibility to client
Client can accept either 7 or 9 rules to maintain compatibility with older
versions of server.
* Add examples and warnings to `servatrice.ini`
With this update a new chat history definition is added on a per
room bases which allows operators to specify the number of chat
messages to store and present to the user on join. Please see
the sample ini for room definitions.
Changed the default value for the client keep alive variable back to 1 (since that is what the setting is if the value is not found in the configuration ini file).
Rather than having the username limitations hard coded, I have moved it
into the ini file. I have added some examples to the code and also to
the ini.
This is only and example and can be expanded on by others.
