* [Build] Use versionless Qt CMake commands
Replace the versioned qt6_add_executable, qt6_add_resources, qt6_add_shaders,\nqt6_add_translations and qt6_wrap_cpp calls with their unversioned forms.\nAll five are documented as available at the project's 6.4 minimum and accept\nthe same arguments.\n\nVerification: full client, Oracle, server and test build passed.
* versionless qt_finalize_target and _project
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* [Tests] Register each test case with CTest instead of each test binary
Registering a test cost four edits across a dozen CMakeLists files: add_test,
add_executable, a conditional add_dependencies on gtest, and target_link_libraries.
The conditional branch was the trap -- it is only needed when GTest was fetched and
add_subdirectory'd, and omitting it yields undefined gtest symbols at link time --
so it was easy to leave out and impossible to notice until the link failed.
Fold all four steps into cockatrice_add_test() and migrate every test directory
onto it, with a cockatrice_add_manual_test() wrapper for the three benchmarks that
are built but deliberately kept out of ctest. The calls now read as a declaration
of what a test is rather than a transcript of how to register one.
While rewriting the registrations, replace add_test(NAME x COMMAND x) with
gtest_discover_tests(). Naming the binary as a single CTest entry meant a CI failure
reported only which binary failed, and ctest -R Suite.Case could not select an
individual case. Discovery raises the suite from 35 opaque entries to 469 real ones:
ctest -R ThemeMigrationTest.IsIdempotent now runs exactly that case, and
ctest -L server / -LE bench work off labels applied at registration.
Give every test a 60s TIMEOUT. CTest's implicit default is 1500s, so one hung
socket wait would stall CI for 25 minutes, and single_instance_manager_test already
does real QLocalSocket waits.
Dropping per-case granularity costs wall-clock time, since the suite becomes
process-spawn bound rather than CPU bound: serial ctest went from 3.8s to 30.8s. Run
it with -j in CI to recover it -- 7.6s at -j4, and 3.5s at -j8, both at or below
the old serial time. The binaries are parallel-safe: the only test claiming a fixed
resource scopes its local socket name to its own pid, so concurrent copies cannot
collide.
Also delete dummy_test, which asserted 1 == 1 and only proved the harness was
wired up -- something the other 468 cases already establish.
No test is added, removed, or changed by this commit; the 469 cases are the same
ones the 35 binaries contained.
* [Tests] Make QtTest available to test targets
QtTest was not among the modules test targets could link, so the Qt model and
signal contracts had no way to be verified from a test: QAbstractItemModelTester
and QSignalSpy both live there.
Add Test to _TEST_NEEDED in cmake/FindQtRuntime.cmake. That is the single place the
union of test-only Qt modules is declared, so this is the only file that needs to
change to make the module reachable from every test target.
Nothing uses it yet. This lands the capability ahead of the model-layer tests that
need it, so those can be added as tests alone rather than as test plus build-system
plumbing.
* [Tests] Correct the note on the oracle test compression defines
add_definitions() populates the directory's COMPILE_DEFINITIONS property, which is
consumed at generate time, so it reaches every target in the directory no matter
where it is called relative to add_executable(). The previous note claimed the
flags stayed confined to the benchmark because the find_package block came after
it; oracle_importer_test, created above that block, carries both defines too.
Verified harmless rather than a live bug: HAS_ZLIB and HAS_LZMA gate code only in
oracle/src/pages.cpp and oracle/src/pagetemplates.cpp, and no test target compiles
either. The ordering and the leaked defines are both pre-existing, so this only
corrects the explanation.
* [Tests] Carry one CTest label per test instead of several
gtest_discover_tests() can hand CTest exactly one label. GoogleTestAddTests.cmake
accumulates its generated script with `foreach(arg ${ARGN})`, so a label list reaches
the CTestTestfile as bare `LABELS ci server`, and CTest reads only the first value of a
property and drops the rest without a word.
The `ci` label that is appended to every registered test was therefore absent from every
test that also asked for `server` or `bench`: `ctest -L ci` reported 400 of 469 cases,
and `ctest --print-labels` never listed a second label anywhere in the build.
Reduce each test to exactly one of `ci`, `server`, or `bench`, which is all the
selections need. The three now partition the suite exactly, 400 + 64 + 5 = 469, and
`ctest -LE bench` still means everything but benchmarks. A second label is now a
configure-time FATAL_ERROR rather than a line that quietly means something else.
Anything orthogonal to a test's kind belongs in a helper flag beside the label, so it
composes with the group instead of competing for the single slot.
Also raise DISCOVERY_TIMEOUT off GoogleTestAddTests' 5s default. A plain debug binary
answers --gtest_list_tests in 0.04s, but that budget is thin once several binaries
discover concurrently behind a -j build, and being over it fails at the *link* step with
a bare "Process terminated due to timeout" that points nowhere near the cause.
* [Tests] Link gtest_main on the fetched-gtest path
The downloaded-gtest branch set GTEST_BOTH_LIBRARIES to `gtest` alone, while
FindGTest sets it to both halves. Every test target links that list rather than
picking an entry point, so on this path nothing provides main() and any test
source that does not define its own fails at link with `undefined reference to
main` pointing at crt1.o, naming neither gtest nor the line responsible.
That stayed latent while every test carried its own four-line main(). A test that
omits it now fails, and the error points at the C runtime rather than at gtest,
which is a long way from the cause. Restoring both halves makes the two paths
agree and drops the boilerplate requirement on new test sources.
The 18 sources that still define main() keep linking: gtest_main.cc defines
nothing but main, so the linker leaves its object in the archive unused rather
than reporting a duplicate.
* [Build] Add an ENABLE_SANITIZERS option for ASan and UBSan
Adds -DENABLE_SANITIZERS, off by default, building with AddressSanitizer and
UndefinedBehaviorSanitizer. The bulk of the work is in the three ways the obvious
implementation silently does the wrong thing.
Probe the flags on the link step, not just the compile step. check_cxx_compiler_flag()
only compiles, so every sanitizer flag comes back unsupported, because linking an ASan
object without -fsanitize=address leaves __asan_init undefined. The result is not a
build failure but a build that appears instrumented and is not, which is worse. Use
check_cxx_source_compiles() with CMAKE_REQUIRED_LINK_OPTIONS instead, and treat an
unsupported sanitizer pair as fatal since the cosmetic flags are allowed to degrade.
Opt vendored sources out per source, through a cockatrice_disable_sanitizers_for()
helper rather than a list of set_source_files_properties() calls at the root. The
helper has to exist because CMake resolves a source-file property against the directory
scope its target was declared in: setting the property from the root with absolute paths
is a no-op, silently, which is why the call sites sit next to the add_library and
add_executable that pull the vendored code in. SFMT, minizip, the LZMA SDK and Qxt SMTP
are excluded. oracle/src/qt-json is in the history but not in the tree, removed in
#7214.
Also mark those sources SKIP_PRECOMPILE_HEADERS. The PCH is built with the sanitizer
flags, so it defines __SANITIZE_ADDRESS__; a translation unit compiled with
-fno-sanitize=all does not and GCC then refuses the PCH, which is a fatal
-Werror=invalid-pch in the servatrice and oracle builds.
-fno-sanitize=vptr is not optional. Qt constructs QObject subclasses into raw storage
and writes the vptr afterwards, so the vptr check reports on essentially every QObject
instantiation, and it has no value here because nothing outside moc-generated code
inherits QObject.
Verified on the resulting build: our own translation units carry ASan and UBSan calls,
SFMT.o carries neither, and the full suite of 464 cases passes clean under
ASAN_OPTIONS=detect_leaks=0:abort_on_error=1 with UBSAN_OPTIONS=halt_on_error=0.
The test suite needs two adjustments to make this option usable at all, both of which
land here because they are consequences of COCKATRICE_SANITIZERS existing rather than
independent changes.
DISCOVERY_TIMEOUT rises from 60s to 300s under sanitizers. An instrumented binary takes
2.8s to answer --gtest_list_tests against 0.04s uninstrumented, and discovery runs
several binaries at once behind a -j build.
One target is excluded via a NO_SANITIZE flag, server_developer_role_test. Reaching
google::protobuf::TextFormat::Printer's destructor aborts on an absl assertion inside
system protobuf 33.4 whenever the consumer translation unit is built without NDEBUG,
which a Debug sanitizer build is. This reproduces with no Cockatrice code at all, just
"TextFormat::Printer p; p.PrintToString(msg, &out);" built with -fsanitize=address, so it
is upstream rather than ours. It is a flag and not a fourth label because "skip this in
the sanitizer leg" has to compose with a test's group rather than compete for the single
label slot, and because a flag excludes by not registering the cases at all, which
cannot rot the way a label silently can. The target still builds and still runs on the
legs without sanitizers.
* [CI] Run the suite once under ASan and UBSan
Adds --sanitize to .ci/compile.sh, mirroring --test, and turns it on for one entry of
the existing Linux Docker matrix: Ubuntu 26.04, which already had a test-enabled leg.
That reuses the image, the ccache layer and the existing step shape, so the CI diff is a
matrix key plus the argument plumbing. Debian 13 and Fedora 44 keep covering the
uninstrumented suite, so nothing is lost by instrumenting one leg.
Sanitizers stay off the release and package legs, which build with --release for
packaging: instrumenting those would change the shipped binaries' optimization profile
and build time for no benefit. macOS and Windows stay uninstrumented too, since ASan is
unreliable against the Qt build there and MSVC has no equivalent without /fsanitize=address.
--sanitize does not imply --test, so an instrumented build can be produced locally
without paying for ctest. When both are given, ctest runs with detect_leaks=0 because Qt
and the sanitizer runtimes both leak at exit by design and LeakSanitizer's default buries
real findings under hundreds of process-teardown reports, and with UBSan halt_on_error=0 so
one run collects many findings instead of stopping at the first. ASan keeps
abort_on_error=1, since a bad access leaves the process unusable and continuing only
produces a second, more confusing report from the wreckage.
* [CI] Publish a gcovr line-coverage report from the test run
Sanitizers tell us what a run did wrong; they say nothing about what it never
reached. This adds the other half: an instrumented build whose report says which
of our own lines no test executes.
Add an ENABLE_COVERAGE option that compiles with --coverage -O0 -g, mirroring the
ENABLE_SANITIZERS opt-in including the per-source carve-out that keeps vendored
trees out of the denominator. -O0 is deliberate: at higher optimisation levels GCC
merges and relocates lines, so the report would describe code that no longer exists
in that form. Only GCC is supported, since Clang's intermediate format needs
llvm-cov; asking for coverage under Clang is a hard error rather than a build that
silently produces unreadable .gcno files.
Keep the filters in a committed gcovr.cfg rather than in the invocation. The tests
themselves are excluded because they are compiled with the same instrumentation
and are only ever executed by the run doing the measuring, so leaving them in would
report a healthier project than we have. The process entry points and the client's
window chrome go too: each needs a display, an interactive terminal or a live
database before it does anything a headless test could observe, so they would
otherwise sit at 0% forever and bury real movement.
Give coverage its own matrix leg rather than a second flag on the sanitizer leg.
The two answer different questions, and combining them slows both down without
telling us more. The new variant key gives the leg its own Docker image and ccache
entry so the two legs cannot race on the same tag.
The leg publishes an HTML report with per-file pages, LCOV, Cobertura XML and a
JSON summary. gcovr is a report-time dependency rather than a build dependency, so
a missing one warns and skips instead of failing an otherwise green build.
* [CI] Resolve the coverage source root before the build dir cd
The previous commit computed SRC_ROOT after `cd "$BUILD_DIR"`, under a comment
claiming it ran before. `$0` is relative to the directory the script was invoked
from, so from inside the build dir `dirname "$0"` no longer resolves and the
subshell's `cd` fails. Under `set -e` that is fatal rather than an empty variable,
which took down every leg in the matrix, coverage or not, including the ones this
change does not otherwise touch.
Move it above the cd and guard it on MAKE_COVERAGE, since the coverage report is
the only consumer. Resolving it unconditionally meant a coverage-only detail was
paid for by every build in the fleet, and gave every one of them a way to fail.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Tests] Register each test case with CTest instead of each test binary
Registering a test cost four edits across a dozen CMakeLists files: add_test,
add_executable, a conditional add_dependencies on gtest, and target_link_libraries.
The conditional branch was the trap -- it is only needed when GTest was fetched and
add_subdirectory'd, and omitting it yields undefined gtest symbols at link time --
so it was easy to leave out and impossible to notice until the link failed.
Fold all four steps into cockatrice_add_test() and migrate every test directory
onto it, with a cockatrice_add_manual_test() wrapper for the three benchmarks that
are built but deliberately kept out of ctest. The calls now read as a declaration
of what a test is rather than a transcript of how to register one.
While rewriting the registrations, replace add_test(NAME x COMMAND x) with
gtest_discover_tests(). Naming the binary as a single CTest entry meant a CI failure
reported only which binary failed, and ctest -R Suite.Case could not select an
individual case. Discovery raises the suite from 35 opaque entries to 469 real ones:
ctest -R ThemeMigrationTest.IsIdempotent now runs exactly that case, and
ctest -L server / -LE bench work off labels applied at registration.
Give every test a 60s TIMEOUT. CTest's implicit default is 1500s, so one hung
socket wait would stall CI for 25 minutes, and single_instance_manager_test already
does real QLocalSocket waits.
Dropping per-case granularity costs wall-clock time, since the suite becomes
process-spawn bound rather than CPU bound: serial ctest went from 3.8s to 30.8s. Run
it with -j in CI to recover it -- 7.6s at -j4, and 3.5s at -j8, both at or below
the old serial time. The binaries are parallel-safe: the only test claiming a fixed
resource scopes its local socket name to its own pid, so concurrent copies cannot
collide.
Also delete dummy_test, which asserted 1 == 1 and only proved the harness was
wired up -- something the other 468 cases already establish.
No test is added, removed, or changed by this commit; the 469 cases are the same
ones the 35 binaries contained.
* [Tests] Make QtTest available to test targets
QtTest was not among the modules test targets could link, so the Qt model and
signal contracts had no way to be verified from a test: QAbstractItemModelTester
and QSignalSpy both live there.
Add Test to _TEST_NEEDED in cmake/FindQtRuntime.cmake. That is the single place the
union of test-only Qt modules is declared, so this is the only file that needs to
change to make the module reachable from every test target.
Nothing uses it yet. This lands the capability ahead of the model-layer tests that
need it, so those can be added as tests alone rather than as test plus build-system
plumbing.
* [Tests] Correct the note on the oracle test compression defines
add_definitions() populates the directory's COMPILE_DEFINITIONS property, which is
consumed at generate time, so it reaches every target in the directory no matter
where it is called relative to add_executable(). The previous note claimed the
flags stayed confined to the benchmark because the find_package block came after
it; oracle_importer_test, created above that block, carries both defines too.
Verified harmless rather than a live bug: HAS_ZLIB and HAS_LZMA gate code only in
oracle/src/pages.cpp and oracle/src/pagetemplates.cpp, and no test target compiles
either. The ordering and the leaked defines are both pre-existing, so this only
corrects the explanation.
* [Tests] Carry one CTest label per test instead of several
gtest_discover_tests() can hand CTest exactly one label. GoogleTestAddTests.cmake
accumulates its generated script with `foreach(arg ${ARGN})`, so a label list reaches
the CTestTestfile as bare `LABELS ci server`, and CTest reads only the first value of a
property and drops the rest without a word.
The `ci` label that is appended to every registered test was therefore absent from every
test that also asked for `server` or `bench`: `ctest -L ci` reported 400 of 469 cases,
and `ctest --print-labels` never listed a second label anywhere in the build.
Reduce each test to exactly one of `ci`, `server`, or `bench`, which is all the
selections need. The three now partition the suite exactly, 400 + 64 + 5 = 469, and
`ctest -LE bench` still means everything but benchmarks. A second label is now a
configure-time FATAL_ERROR rather than a line that quietly means something else.
Anything orthogonal to a test's kind belongs in a helper flag beside the label, so it
composes with the group instead of competing for the single slot.
Also raise DISCOVERY_TIMEOUT off GoogleTestAddTests' 5s default. A plain debug binary
answers --gtest_list_tests in 0.04s, but that budget is thin once several binaries
discover concurrently behind a -j build, and being over it fails at the *link* step with
a bare "Process terminated due to timeout" that points nowhere near the cause.
* [Tests] Link gtest_main on the fetched-gtest path
The downloaded-gtest branch set GTEST_BOTH_LIBRARIES to `gtest` alone, while
FindGTest sets it to both halves. Every test target links that list rather than
picking an entry point, so on this path nothing provides main() and any test
source that does not define its own fails at link with `undefined reference to
main` pointing at crt1.o, naming neither gtest nor the line responsible.
That stayed latent while every test carried its own four-line main(). A test that
omits it now fails, and the error points at the C runtime rather than at gtest,
which is a long way from the cause. Restoring both halves makes the two paths
agree and drops the boilerplate requirement on new test sources.
The 18 sources that still define main() keep linking: gtest_main.cc defines
nothing but main, so the linker leaves its object in the archive unused rather
than reporting a duplicate.
* [Build] Run the test suite under ASan and UBSan (#7400)
* [Build] Add an ENABLE_SANITIZERS option for ASan and UBSan
Adds -DENABLE_SANITIZERS, off by default, building with AddressSanitizer and
UndefinedBehaviorSanitizer. The bulk of the work is in the three ways the obvious
implementation silently does the wrong thing.
Probe the flags on the link step, not just the compile step. check_cxx_compiler_flag()
only compiles, so every sanitizer flag comes back unsupported, because linking an ASan
object without -fsanitize=address leaves __asan_init undefined. The result is not a
build failure but a build that appears instrumented and is not, which is worse. Use
check_cxx_source_compiles() with CMAKE_REQUIRED_LINK_OPTIONS instead, and treat an
unsupported sanitizer pair as fatal since the cosmetic flags are allowed to degrade.
Opt vendored sources out per source, through a cockatrice_disable_sanitizers_for()
helper rather than a list of set_source_files_properties() calls at the root. The
helper has to exist because CMake resolves a source-file property against the directory
scope its target was declared in: setting the property from the root with absolute paths
is a no-op, silently, which is why the call sites sit next to the add_library and
add_executable that pull the vendored code in. SFMT, minizip, the LZMA SDK and Qxt SMTP
are excluded. oracle/src/qt-json is in the history but not in the tree, removed in
#7214.
Also mark those sources SKIP_PRECOMPILE_HEADERS. The PCH is built with the sanitizer
flags, so it defines __SANITIZE_ADDRESS__; a translation unit compiled with
-fno-sanitize=all does not and GCC then refuses the PCH, which is a fatal
-Werror=invalid-pch in the servatrice and oracle builds.
-fno-sanitize=vptr is not optional. Qt constructs QObject subclasses into raw storage
and writes the vptr afterwards, so the vptr check reports on essentially every QObject
instantiation, and it has no value here because nothing outside moc-generated code
inherits QObject.
Verified on the resulting build: our own translation units carry ASan and UBSan calls,
SFMT.o carries neither, and the full suite of 464 cases passes clean under
ASAN_OPTIONS=detect_leaks=0:abort_on_error=1 with UBSAN_OPTIONS=halt_on_error=0.
The test suite needs two adjustments to make this option usable at all, both of which
land here because they are consequences of COCKATRICE_SANITIZERS existing rather than
independent changes.
DISCOVERY_TIMEOUT rises from 60s to 300s under sanitizers. An instrumented binary takes
2.8s to answer --gtest_list_tests against 0.04s uninstrumented, and discovery runs
several binaries at once behind a -j build.
One target is excluded via a NO_SANITIZE flag, server_developer_role_test. Reaching
google::protobuf::TextFormat::Printer's destructor aborts on an absl assertion inside
system protobuf 33.4 whenever the consumer translation unit is built without NDEBUG,
which a Debug sanitizer build is. This reproduces with no Cockatrice code at all, just
"TextFormat::Printer p; p.PrintToString(msg, &out);" built with -fsanitize=address, so it
is upstream rather than ours. It is a flag and not a fourth label because "skip this in
the sanitizer leg" has to compose with a test's group rather than compete for the single
label slot, and because a flag excludes by not registering the cases at all, which
cannot rot the way a label silently can. The target still builds and still runs on the
legs without sanitizers.
* [CI] Run the suite once under ASan and UBSan
Adds --sanitize to .ci/compile.sh, mirroring --test, and turns it on for one entry of
the existing Linux Docker matrix: Ubuntu 26.04, which already had a test-enabled leg.
That reuses the image, the ccache layer and the existing step shape, so the CI diff is a
matrix key plus the argument plumbing. Debian 13 and Fedora 44 keep covering the
uninstrumented suite, so nothing is lost by instrumenting one leg.
Sanitizers stay off the release and package legs, which build with --release for
packaging: instrumenting those would change the shipped binaries' optimization profile
and build time for no benefit. macOS and Windows stay uninstrumented too, since ASan is
unreliable against the Qt build there and MSVC has no equivalent without /fsanitize=address.
--sanitize does not imply --test, so an instrumented build can be produced locally
without paying for ctest. When both are given, ctest runs with detect_leaks=0 because Qt
and the sanitizer runtimes both leak at exit by design and LeakSanitizer's default buries
real findings under hundreds of process-teardown reports, and with UBSan halt_on_error=0 so
one run collects many findings instead of stopping at the first. ASan keeps
abort_on_error=1, since a bad access leaves the process unusable and continuing only
produces a second, more confusing report from the wreckage.
* [Build] Fix sanitizer flag leak into release package and make UBSan fail CI
- compile.sh always passes -DENABLE_SANITIZERS explicitly so the
release-package reconfigure in the same build dir cannot inherit ON
from the sanitized debug step (which shipped libasan/libubsan DEB deps).
- Sanitizers.cmake resets COCKATRICE_SANITIZERS to OFF when the option is
off (CACHE INTERNAL otherwise sticks forever, keeping NO_SANITIZE skips
and the 300s discovery timeout).
- UBSan now fails the job: -fno-sanitize-recover=undefined at compile time
plus UBSAN_OPTIONS halt_on_error=1 (recover mode exits 0, so the old
halt_on_error=0 could never fail).
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Translations] Load Qt's own translations and build ours with the binary
Three separate bugs kept translations from working.
installNewTranslator() loaded the application translation into
qtTranslator. QTranslator discards its previous contents on every load, so
that wiped the qt_<lang>.qm loaded one line earlier and installed an empty
translator instead. Qt's own strings were never translated on any platform.
Give each file its own translator.
QLibraryInfo::path(TranslationsPath) was the only directory searched for
Qt's translations. A relocated Qt can report a path that does not exist: the
KDE Flatpak runtime reports /usr/translations while its files live in
/usr/share/qt6/translations. Probe the usual install layouts and only hand
back the ones that exist.
The .qm files were attached to the default build target only, so building
the executable on its own left it without any translations and the language
selector empty. Attach them to the target as well.
Move the shared lookup into TranslationLoader so client and Oracle cannot
drift again, and have it report a missing translation at debug level. An
unset language is the default for English, which has no file to begin with,
and warning about it only added noise to every fresh debug log.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Tests] Define main() in translation_loader_test
Without a GTest installation the fallback in tests/CMakeLists.txt links
only gtest, not gtest_main, so the test has to bring its own main(). Every
other test already does; only this one relied on the distribution package
and failed to link on CI.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Tests] Put the translation loader fixture next to the test executable
A multi-config generator (MSBuild, Xcode) writes the executable to a
per-config subdirectory while the .qm stays in the current binary
directory, so applicationDirPath() never saw the fixture and
ABuildTreeFindsTheTranslationsNextToTheExecutable failed on Windows.
* [Translations] Depend on Qt's lrelease target and skip the loader test without lrelease
Attaching the .qm custom commands to a second custom target races with
Qt's own <Project>_lrelease target on MSBuild/Makefiles and is rejected
by Xcode, so depend on Qt's target instead. Only build the translation
loader test when Qt6::lrelease is available.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Co-authored-by: ZeldaZach <zahalpern+github@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* [Build] Keep Windows installs free of build-tree artifacts
Several Windows packaging gaps could leak Visual Studio CMake build
output into the installed application or the NSIS installer:
- The per-app DLL sweep used
${CMAKE_BINARY_DIR}/${PROJECT_NAME}/${CMAKE_BUILD_TYPE}, which is
empty on multi-config generators, collapsing the recursive
DIRECTORY install into the whole build tree (containing *.dir,
*_autogen, .qt, .qsb, x64, ...). Point it at the real per-config
output with $<TARGET_FILE_DIR:...> and exclude build artifacts.
- install(FILES ${OPENSSL_INCLUDE_DIRS} ...) tried to install OpenSSL
include directories as files. CMake refuses this
("install FILES given directory"); it only slipped through CI
because the vcpkg OpenSSL config leaves the variable empty. Remove it;
fixup_bundle already ships the OpenSSL runtime DLLs.
- The NSIS uninstaller only deleted *.exe/*.dll and a few known files,
so build-tree leftovers survived an uninstall/reinstall cycle. Wipe
the whole directory tree instead.
- Add a Windows CI gate that lists the packaged installer with 7-Zip
and fails the build if any build-tree artifact path is found.
* Update .ci/compile.sh
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* [Build] Rework Windows installer artifact exclusions per review
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* Add scheme-variant theme asset resolution (#7209-1)
ThemeManager::assetPath() and schemeVariantPath() resolve a theme asset to its scheme-variant file (prefix-light/dark.png) with fallback to the plain asset, and themePixmap()/loadBrush()/loadExtraBrush() use them. CSS files load style-dark.css or style-light.css when present. Home widget re-resolves its background on theme change.
Link pixel_map_generator.cpp into the oracle target, which needs Qt6::Xml for QDomDocument.
* Fix clang-format wrap of theme format probe lists
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Oracle] Parse sets lazily to slash importer peak memory
- Add a raw JSON scanner that splits the document into per-set byte ranges
without materializing the JSON tree
- Keep only the raw document bytes and parse one set at a time in startImport
- Take readSetsFromByteArray by value so the wizard's buffer is moved, not copied
- Clear the retained raw data in releaseSetData()/clear()
- Cover the scanner and lazy parsing with tests
Took 2 minutes
* [Oracle] Fix nesting-depth cap, tolerate unescaped control chars, lazy-parse review fixes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Build] Add precompiled headers for Qt-backed executables
Reparsing QtCore/QtGui/QtWidgets/QtNetwork in ~460 client translation
units is the dominant compilation cost. Precompile the two common layers:
- qtcore_pch.h (Qt Core only; safe even for headless Servatrice)
- qtwidgets_pch.h (adds Gui/Widgets/Network; used by Cockatrice and Oracle)
target_precompile_headers() requires CMake 3.16, now the project minimum.
Estimated 30-50% faster client rebuilds.
* [Build] Format qtwidgets precompiled header
clang-format include regrouping and a missing trailing newline.
* [Build] Add PCH-aware ccache sloppiness config; format cmake/pch headers
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Oracle] Replace vendored QtJson with native QJson for set import
- Drop the vendored oracle/src/qt-json/json.{h,cpp} implementation
- Switch SetToDownload and importCardsFromSet from QList<QVariant> to
native QJsonArray/QJsonObject
- Release set JSON data after import in the save sets page
Took 20 minutes
* [Oracle] Restore property coercion and legality merge in native JSON import
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [CI] Remove Qt5
Took 10 minutes
Took 9 minutes
* Revert CI failure and fix up comments
Took 4 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [App/Theme] Palette Editor
Took 1 minute
Took 1 hour 47 minutes
Took 6 seconds
Took 3 minutes
Took 5 minutes
Took 3 minutes
* Add oracle, add palette files and configs.
Took 10 minutes
* Fix a stupid include mistake, thanks IDE
Took 3 minutes
Took 20 seconds
* Includes.
Took 4 minutes
* Fix ampersand not displaying correctly.
Took 14 minutes
* Longer variable names.
Took 10 minutes
Took 5 seconds
* Change ampersand everywhere
Took 23 seconds
* Doxygen properly.
Took 1 minute
* Remove namespace, fold I/O into structs.
Took 12 minutes
* Remove namespace, fold I/O into structs.
Took 33 seconds
* Alphabetize.
Took 35 seconds
* Lint.
Took 49 seconds
* Add a combo box to quick switch settings.
Took 19 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Have CardDatabase::getPreferredPrintingInfo respect card provider ID overrides (pinned printings)
Took 13 minutes
Took 37 seconds
Took 10 seconds
Took 10 seconds
# Commit time for manual adjustment:
# Took 30 seconds
Took 15 seconds
Took 8 minutes
Took 21 seconds
* Move settings cache and settings card preference provider out of libcockatrice_settings and into cockatrice
Took 52 minutes
Took 9 minutes
Took 1 minute
* Temp cache.
Took 16 minutes
* Dependency Injection for SettingsCache
* Turn SettingsCache into a QSharedPointer.
* Implement interfaces for settings that need it
Took 2 hours 38 minutes
* Adjust oracle.
Took 5 minutes
* Move abstract/noop interfaces to libcockatrice_interfaces so they can be linked against independently.
Took 52 minutes
* Clean up some links.
Took 3 minutes
* Cleanup two includes.
Took 3 minutes
* More fixes.
Took 7 minutes
* More includes that slipped past.
Took 3 minutes
* Stop mocking and start injecting for tests.
Took 15 minutes
* I don't know why remote_client was including main.
Took 4 minutes
* Include.
Took 3 minutes
* Lint.
Took 2 minutes
* Don't use Qt pointers.
Took 1 hour 7 minutes
* Make parser use CardSettingsInterface
Took 13 minutes
* Also adjust constructor lol.
Took 8 minutes
* Lint.
Took 32 minutes
* Revert "Lint."
This reverts commit ecb596c39e.
Took 3 minutes
* Test.
Took 3 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Untangle the card_info.cpp mess and split into individual files.
Took 53 minutes
* Auto-lint was disabled and my pre-commit hook didn't fire. Oh well.
Took 3 minutes
* Fix oracle.
Took 35 seconds
* Lint!
Took 20 seconds
* Fix tests.
Took 3 minutes
* CMakeLists.txt: The reason why I have to disable auto-lint.
Took 2 minutes
* dbconverter.
Took 3 minutes
* Oracle again.
Took 3 minutes
* dbconverter again.
Took 3 minutes
* dbconverter again again.
Took 2 minutes
* More fixes.
Took 4 minutes
Took 21 seconds
* Everything needs everything.
Took 3 minutes
* Everything means everything.
Took 4 minutes
* All the tests.
Took 4 minutes
* I hate everything about this.
Took 3 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* big move
* also move game_specific_terms
* fix imports
* alphabetize cmake
* fix build failure
* create database folder and move files into it
* fix includes
* run formatter
* feat: Configurable colors for card counter
This patch adds support for:
- User-defined colors for card counters;
- 3 additional types of card counters.
The colors used for counters is stored locally and not shared with other
users. This is intentional as the feature is likely to be used for
improved accessibility.
In order to preserve backwards-compatibility, and because I don't have a
better idea, counters keep their existing color-based names (Red, Green,
Yellow) in menus and in the message log. For consistency, the new
counters also get assigned color-based names (Cyan, Purple, Magenta).
This choice is a compromise, as allowing user-defined names for counters
raises many additional (UI/UX) questions that I don't know how to
answer. A good long-term solution would be to include counter names as
part of a game definition system and hence would be in scope for #1740.
The choice of adding 3 additional types of counters and the Cyan, Purple
and Magenta names are not random. The existing code for determining
counter colors goes: Red, Green, Yellow, Cyan, Purple, Magenta, Black
(unreadable) and thus 6 is the maximum number of counters that existing
versions of Cockatrice are able to support. This way, released clients
get a degraded experience (cannot interact with the new counters,
messages in the server log say "Player X places 1 on Card (now 1)"
without specifying 1 of what), but do see the counters properly.
Fixes#2020
* Do not use %n
* Use SettingsManager
* Use qSin instead of sin
Fix build failures with old GCC.
* Use letters for card counter names
* Place card counter actions in separate menu
* Remove copy-paste error
* include QtMath
* Do not color whole settings page
* derp
---------
Co-authored-by: Zach H <zahalpern+github@gmail.com>
* Parallelize picture loader.
* Queue requests instead.
* Include a status bar for the picture loader.
* Save redirect cache on destruction.
* Address comments.
* Let's not overwrite an ambigious variable name.
* Lint.
* Oracle needs the status bar too.
* We actually get a free request if we hit a cached image.
* Fix cmake list.
* toString() the url.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* add "open recent" menu option to deck editor tab
* change texts
* also get it to work with loading from deck storage tab
* add error message when fail to open
* only update recents on successful open
* only update recents on successful open
* reword to "Clear"
* Refactor CardDatabase *db global variable to singleton CardDatabaseManager.
This commit refactors the global variable CardDatabase *db into a singleton encapsulated by the DatabaseManager class, accessible via DatabaseManager::getInstance(). This change centralizes access to the database instance, improving code modularity and encapsulation, resolving dependencies on main.h for code that requires access to the database instance.
- Added DatabaseManager class with getInstance() method returning a pointer to the singleton CardDatabase.
- Removed global db variable and updated references across the codebase.
- Thread-safe static initialization for the singleton.
Impact: This refactor should have no functional impact on the application, as it maintains the same interface for accessing the CardDatabase instance. However, the codebase now benefits from improved encapsulation, lifetime management, and thread-safety.
* Refactor CardDatabase *db global variable to singleton CardDatabaseManager.
This commit refactors the global variable CardDatabase *db into a singleton encapsulated by the DatabaseManager class, accessible via DatabaseManager::getInstance(). This change centralizes access to the database instance, improving code modularity and encapsulation, resolving dependencies on main.h for code that requires access to the database instance.
- Added DatabaseManager class with getInstance() method returning a pointer to the singleton CardDatabase.
- Removed global db variable and updated references across the codebase.
- Thread-safe static initialization for the singleton.
Impact: This refactor should have no functional impact on the application, as it maintains the same interface for accessing the CardDatabase instance. However, the codebase now benefits from improved encapsulation, lifetime management, and thread-safety.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* refactored cardzone.cpp, added doc and changed if to switch case
* started moving every files into different folders
* remove undercase to match with other files naming convention
* refactored dialog files
* ran format.sh
* refactored client/tabs folder
* refactored client/tabs folder
* refactored client/tabs folder
* refactored client folder
* refactored carddbparser
* refactored dialogs
* Create sonar-project.properties
temporary file for lint
* Create build.yml
temporary file for lint
* removed all files from root directory
* removed all files from root directory
* added current branch to workflow
* fixed most broken import
* fixed issues while renaming files
* fixed oracle importer
* fixed dbconverter
* updated translations
* made sub-folders for client
* removed linter
* removed linter folder
* fixed oracle import
* revert card_zone documentation
* renamed db parser files name and deck_view imports
* fixed dlg file issue
* ran format file and fixed test file
* fixed carddb test files
* moved player folder in game
* updated translations and format files
* fixed peglib import
* format cmake files
* removing vcpkg to try to add it back later
* tried fixing vcpkg file
* renamed filter to filters and moved database parser to cards folder
* reverted translation files
* reverted oracle translated
* Update cockatrice/src/dialogs/dlg_register.cpp
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* Update cockatrice/src/client/ui/window_main.cpp
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* removed empty line at file start
* removed useless include from tab_supervisor.cpp
* refactored cardzone.cpp, added doc and changed if to switch case
* started moving every files into different folders
* remove undercase to match with other files naming convention
* refactored dialog files
* ran format.sh
* refactored client/tabs folder
* refactored client folder
* refactored carddbparser
* refactored dialogs
* removed all files from root directory
* Create sonar-project.properties
temporary file for lint
* Create build.yml
temporary file for lint
* added current branch to workflow
* fixed most broken import
* fixed issues while renaming files
* fixed oracle importer
* fixed dbconverter
* updated translations
* made sub-folders for client
* removed linter
* removed linter folder
* fixed oracle import
* revert card_zone documentation
* renamed db parser files name and deck_view imports
* fixed dlg file issue
* ran format file and fixed test file
* fixed carddb test files
* moved player folder in game
* updated translations and format files
* fixed peglib import
* reverted translation files
* format cmake files
* removing vcpkg to try to add it back later
* tried fixing vcpkg file
* pre-updating of cockatrice changes
* removed empty line at file start
* reverted oracle translated
* Update cockatrice/src/dialogs/dlg_register.cpp
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* Update cockatrice/src/client/ui/window_main.cpp
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* removed useless include from tab_supervisor.cpp
---------
Co-authored-by: tooomm <tooomm@users.noreply.github.com>
* remove dependency on deprecated qt5 libraries for qt6
removes the use of qt6-5compat for builds
replaces use of QRegExp with QRegularExpression
fixes incorrect usage of QRegExp
removes use of QTextCodec
fixes incorrect usage of QTextCodec
sets qtlinguist as a required component for qt6
* fix anchoredPattern not existing in qt 5.11
* merge clangify and cmakify into format.sh
update desktop lint workflow to 22.04
print cmake-format version as well
um, rename things?
add extra examples to format.sh --help
add option to not run clang-format
fix version display in .ci/lint_cpp.sh
fix relative paths in format.sh
fix formatting dirs
* run ./format.sh --cmake --branch ""
* revert formatting of cmake comments
Add lock around deleting arrows for commanding cards
Add support for Qt6 w/ Backwards Qt5
Handle Qt5/6 cross compilation better
Last cleanups
caps matter
Fix serv
Prevent crash on 6.3.0 Linux & bump to 5.8 min
Prevent out of bounds indexing
Delete shutdown timer if it exists
Fixup ticket comments, remove unneeded guards
Try to add support for missing OSes
Update .ci/release_template.md
Update PR based on comments
Update XML name after done and remove Hirsute
Address local game crash
Address comments from PR (again)
Tests don't work on mac, will see if a problem on other OSes
make soundengine more consistent across qt versions
disable tests on distros that are covered by others
Fix Oracle Crash due to bad memory access
Update Oracle to use new Qt6 way of adding translations
Add support for Qt5/Qt6 compiling of Cockatrice
Remove unneeded calls to QtMath/cmath/math.h
Update how we handle bitwise comparisons for enums with Tray Icon
Change header guards to not duplicate function
Leave comment & Fix Path for GHA Qt
Update common/server.h
Update cockatrice/src/window_main.cpp
Rollback change on cmake module path for NSIS
check docker image requirements
add size limit to ccache
put variables in quotes
properly set build type on mac
avoid names used in cmake
fix up cmake module path
cmake 3.10 does not recognize prepend
Support Tests in FindQtRuntime
set ccache size on non debug builds as well
immediately return when removing non existing client
handle incTxBytes with a signal instead
don't set common link libraries in cockatrice/CMakeLists.txt
add comments
set macos qt version to 6
Try upgrading XCode versions to latest they can be supported on
Ensure Qt gets linked
add tmate so i can see what's going on
Qt6 points two directories further down than Qt5 with regard to the top lib path, so we need to account for this
Establish Plugins directory for Qt6
Establish TLS plugins for Qt6 services
Minor change for release channel network manager
Let windows build in parallel cores
Wrong symbols
Qt6 patch up for signal
add missing qt6 package on deb builds
boolean expressions are hard
negative indexes should go to the end
Intentionally fail cache
move size checks to individual zone types
Hardcode libs needed for building on Windows, as the regex was annoying
Update wording
use the --parallel option in all builds
clean up the .ci scripts some more
tweak fedora build
add os parameter to compile.sh
I don't really like this but it seems the easiest way
I'd prefer if these types of quirks would live in the main configuration
file, the yml
fixup yml
readd appended cache key to vcpkg step
fix windows 32 quirk
the json hash is already added to the key as well
remove os parameter and clean up ci files
set name_build.sh to output relative paths
set backwards compatible version of xcode and qt on mac
set QTDIR for mac builds on qt5
has no effect for qt6
export BUILD_DIR to name_build.sh
merge mac build steps
merge homebrew steps, set package suffix
link qt5
remove brew link
set qtdir to qt5 only
compile.sh vars need to be empty not 0
fix sets manager search bar on qt 5.12/15
fix oracle subprocess errors being ignored on qt 5
clean up translation loading
move en@source translation file so it will not get included in packages
NOTE: this needs to be done at transifex as well!
Use generator platform over osname
Short circuit if not Win defined
* CardDB: merge all card properties in a new structure
* Pre Json parser changes
* Cockatrice: use qt's builtin json support
* Move qt-json src dir from cockatrice to oracle
* Add dummy cockatricexml4 parser (yet to be implemented)
* Implement a new parser and xml format
* cockatricexml4: new xml parser following the "generic properties hash" pattern;
* oracleimporter: refactor the parsing code to better adapt to cockatricexml4; rewrote split cards parsing
* carddb: change "colors" from a stringlist to a string
* carddb: move the getMainCardType() method to the cockatricexml3 parser
*
* CardInfo: show all properties (stil missing: nice name + translation)
* Rework the "add related card" feature so that it doesn't change the card name in the carddb
Also, fix token count display
* Picture loader: Added support for transform cards
* Fix side information for flip cards
Mtgjson uses side a/b for flip cards, while scryfall doesn't
* Pictureloader: dynamic tag resolution from card properties
Examples old => new
* !cardid! => !set:muid!
* !uuid! => !set:uuid!
* !collectornumber! => !set:num!
New examples:
* !prop:type!
* !prop:manacost!
* Start moving mtg-related property names to a specific file
* Clangify
* Fix tests
* Make gcc an happy puppy
* Revert "Make gcc an happy puppy"
This reverts commit 446ec5f27516c4d3b32dbfc79557f4827c5c5bdf.
* Some gcc fixes
* Share set list between different db parsers, so they won't overwrite one each other
* All glory to the hypnoclangifier!
* Fix test compilation
* Cleanup edited files in the prior PR. (#3519)
* Cleanup edited files in the prior PR.
Signed-off-by: Zach Halpern <ZaHalpern+github@gmail.com>
* Fix includes
Signed-off-by: Zach Halpern <ZaHalpern+github@gmail.com>
* Update carddatabase.h
* Cockatrice Picture loader uses better defined URLs now
URLs are defined on the Card Management tab
Instead of Primary/Backup, you can now define a list of URLs
List of URLs can be drag/dropped for priority ordering
Oracle now uses scryfallId > mtgjsonUUID for !uuid!
Signed-off-by: Zach Halpern <ZaHalpern+github@gmail.com>
* Simplify to QStringList and remove metacall
Signed-off-by: Zach Halpern <ZaHalpern+github@gmail.com>
* fix issues brought up by Dae. Also fix how the defaults load to account for first time users.
Signed-off-by: Zach Halpern <ZaHalpern+github@gmail.com>
* clangify
* Fix save settings on row moved (#3495)
* merge model fix, and reclangify
Signed-off-by: Zach Halpern <ZaHalpern+github@gmail.com>
* Sources > Resources
Signed-off-by: Zach Halpern <ZaHalpern+github@gmail.com>
* Basic mtgjsonv4 support
* Fix set type
* [WIP] Oracle: use zx instead of zip
* clanfigy fixes
* Fix reading last block of xz
* Added back zip support
* [WIP] adding xz on ci + fixes
* typo
* resolve conflict
* Make gcc an happy puppy
* test appveyor build
* appveyor maybe
* Appveyor: add xz bindir
* Update ssl version (the old one is not available anymore)
* Windows is a really shitty platform to code on.
* test vcpkg
* again
* gosh
* nowarn
* warning 2
* static
* Maybe
* cmake fix
* fsck this pain
* FindWin32SslRuntime: add vcpkg path
* Appveyor: cache support, force usable of openssl from vcpkg
* updated as suggested
* ouch
* Import card uuids and expose this property as !uuid! for card image download
* Minor style fixes
* address changed URL
* Osx: fix qt plugin installation
* Add make install step to travis debug build
* only install under osx
* Add "styles" plugins (for native look'n'feel)
* Osx: upgrade qt from 5.5 to current (5.10.1)
* Fix osx on travis
The qt homebrew formula now installs three qt* symlinks (qt, qt5, qt5@5.x) so we can't use/don't need bash globbing anymore
* Portable mode for windows
* fix start menu in portable mode
* Make gcc an happy puppy
* Clean old installation if we are installing over an old portable mode installation
* Default to Desktop\CockatricePortable
* Settings dialog fixes
* wording
