* [Oracle] Don't report a cancelled card database update as successful (#3470)
Took 3 minutes
* [Oracle] Only report cancel when nothing was saved yet
Rejecting the wizard after SaveSetsPage or a download page already
wrote the database to disk still replaced cards.xml on disk, but
wasCancelled() forced exit code 1 so Cockatrice skipped the reload.
Track successful saves with OracleWizard::markDatabaseSaved() and only
treat a cancel as a failure when nothing was saved.
* [Oracle] Restore updater stderr in card update error dialog
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [CardDB] Reload when the first run enables all sets
checkUnknownSets() enabled every set when none was enabled, but the
database had already been parsed under that empty enablement, so the
parsers had stripped every printing. It only notified the models and never
reloaded, leaving the deck editor's card database display empty until the
next launch.
Route the all-sets-enabled case through the same reload the new-sets path
uses, and skip caching a snapshot whose sets are all disabled.
* [CardDB] Own checkUnknownSets after startup and fix the cache skip
The loader's initialLoadComplete guard skipped checkUnknownSets() on the
first successful load of the session, so a download that landed after
startupConfigCheck() and the onboarding wizard had already run (e.g.
skipping the wizard download and fetching later from the menu) left every
set disabled and the deck editor blank until the next launch. The guard
also let the check run on the worker before the queued snapshot swap, and
alongside reloadCardDatabasesAndNotify()'s own check, double-emitting
cardDatabaseNewSetsFound on manual reloads.
Move the check to the callers that load after startup: the post-update,
custom-import, and spoiler paths run it via a QFutureWatcher once the
finished snapshot has been swapped in, and the loader's synchronous
path-change reload runs it directly.
Judge the cache skip by the parsed sets' own enablement, what the parsers
actually saw, instead of getEnabledSetNames(), which reports empty for the
noop controller even though it enables every set. Wait for the first-run
reparse before opening Manage Sets so the dialog cannot bind to the
pre-reload set instances.
* [CardDB] Queue post-reload check and unblock first-run Manage Sets
reloadCardDatabasesAndNotify() no longer emits cardDatabaseEnabledSetsChanged after the swap's Reset already rebuilt the models (second 36k rebuild froze startup), and its follow-up checkUnknownSets() is queued to the GUI thread so it sees swapped-in data. cardDatabaseAllNewSetsEnabled() chains Welcome/Manage Sets off a QFutureWatcher instead of waitForFinished() blocking the event loop during the reparse.
* [CardDB] Batch the first-run enable-all into a single settings flush
checkUnknownSets() enabled every set with ~3 QSettings rewrite cycles per set (sort key, known, enabled), and each setValue re-opens and re-syncs the whole cardDatabase.ini. With a full database (874 sets) that froze the GUI thread for ~9s after the database download (LagMonitor: event loop stalled for 9129 ms, measured offscreen with a real 59MB cards.xml), reading as a total application hang that recovers on its own.
Persist the enable-all through the controller's batched saveSets() in a single flush instead, mirroring what SetsModel::save() already does: CardSetList::enableAllBatched() assigns fresh sort keys and marks every set known+enabled in memory, then writes all records at once. SetSaveData gains the isKnown flag so the batch covers all three options, and SetsModel::save() passes the sets' known state through (unchanged behavior there).
Also drop the cardDatabaseEnabledSetsChanged emission from the all-sets-enabled branch: the reload chained off cardDatabaseAllNewSetsEnabled rebuilds the models from the re-parsed snapshot via cardDatabaseReset, so emitting both rebuilt the 36k-card models twice on the GUI thread.
Adds a cache-invalidation test driving the real checkUnknownSets() first-run path.
* [CardDB] Batch the new-sets-found enable-all the same way
The first-run batching fixed the 874-set case, but the new-sets-found dialog path (enableAllUnknownSets/markAllSetsAsKnown) still wrote per set and per option, each setValue re-opening and re-syncing the whole cardDatabase.ini. Users with hundreds of custom sets hit the same multi-second GUI stall when answering the dialog.
Persist both through the controller's batched saveSets() in a single flush, writing only changed sets (so the common no-op check skips the flush entirely). Removes the now-unused write-through CardSetList methods (enableAll, enableAllUnknown, markAllAsKnown, guessSortKeys) so the batched flush is the only way to persist bulk set changes.
Extends the test controller mock with per-write/batched-flush counters and adds tests asserting both dialog paths persist with exactly one flush and zero individual writes.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Client] Improve card database update visibility
Addresses Cockatrice/Cockatrice#7431.
Cockatrice previously offered no in-client feedback while the card
database updater ran: the only progress UI lived in the first-run
wizard, stderr/stdout were not parsed in interactive runs, and starting
a second update with Oracle already open or with a hidden background run
active just showed a confusing 'already running' guard - even though
Oracle is launched as a separate process with no lifecycle tracking.
- Add a status-bar widget (CardDatabaseUpdateStatusBar) that appears
while an update runs and shows the Downloading/Parsing/Importing
stages with percent progress; it is also used in the quit-confirm
prompt so users see an unfinished update before cancelling it.
- Parse the updater's PROGRESS lines (new CardUpdateProgressParser,
unit-tested) in both foreground and background runs and log stage
changes to the new card_database.update category, throttled to at
most one line per second; forward Oracle stderr to the logs.
- Show a tray balloon when a background update starts and on finish or
failure instead of staying silent.
- Request a running Oracle instance to raise itself (QLocalServer
CockatriceOracleRaise-<user>) when the user starts another update, and
demote the 'already running' guard to an informative message only when
no running instance can be found.
- Emit download/scan/import progress unconditionally from Oracle so
interactive and background runs behave the same.
- Document the new log category in the troubleshooting guide.
* [Client] Address card database update review feedback
* [Client] Add setting to control card database update tray notifications
* [Client] Address remaining card database update review nits
- Rename card_update_progress_parser.{h,cpp} to card_update_progress.{h,cpp}
- Store the CardUpdateProgress struct in the status bar widget
* Lint.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [DeckList] Apply include-what-you-use to libcockatrice_deck_list
* [IWYU] Apply include-what-you-use across the tree
Run one whole-tree IWYU pass over the libcockatrice_* libraries, the
Cockatrice client, Oracle, Servatrice and the test suite, so each
translation unit includes what it uses directly and forward-declares
what it does not need.
IWYU only analyses real translation units, never the moc code CMake
generates from Q_OBJECT headers, so it strips includes that moc output
silently relies on. Where a type is passed by value (or nested in a
QList/QMap) in a signal or slot signature, the generated moc code needs
the complete type; those includes are kept with an explanatory
`// IWYU pragma: keep`. The same holds for Q_DECLARE_METATYPE targets
such as QSqlDatabase.
A handful of includes are added by hand where callers brace-initialize a
const-reference parameter, which also requires the complete type.
Applied as a single commit on purpose: stripping includes from the
libcockatrice_* headers is precisely what breaks the client, test and
server translation units, and the fixes for those live in the same
translation units. Splitting by component would therefore leave
intermediate commits that do not compile.
All 426 modified Q_OBJECT/Q_GADGET headers were verified to be
moc-self-contained by compiling each generated moc_*.cpp standalone;
several built only because of moc include ordering in
mocs_compilation.cpp before the keep-includes were added.
* [Tooling] Emit public Qt headers and fix IWYU fallout CI found
Three problems the local build could not see, all because a green local
build only proves the configuration it was run under.
Private Qt headers. IWYU emitted private, lowercase Qt headers, and
qtypes.h does not exist at all before Qt 6.9, so the Debian 12 and
Ubuntu 24.04 jobs on Qt 6.4.2 failed to compile. The generator only
emitted a mapping when the capital header name mirrored the private one
(QAbstractAnimation for qabstractanimation.h), so qtypes.h, which is
wrapped by QtTypes instead, got no mapping and kept the private
spelling. Map it explicitly to <QtTypes>, which is public since Qt 5 and
provides the same typedefs either way, and rewrite the 100 affected
includes.
Do not generalize this to "prefer any Qt* wrapper". The table is
generated from whichever Qt is installed, and the wrappers are not
equally old: QtLogging only appeared in Qt 6.8 and QtMinMax in 6.5, so
that heuristic trades one breakage for another. Every other lowercase
header still in the tree has shipped publicly since Qt 5, so those are
left alone.
Platform-guarded includes. IWYU only sees the preprocessor configuration
it is handed, so it dropped an include that only the macOS branch of
main.cpp needs, and the macOS jobs failed on an undeclared
UrlSchemeEventFilter. Restore the include. Force-compiling every file
that carries a platform guard under Q_OS_MAC, Q_OS_MACOS and __APPLE__
reports nothing else, so the macOS branches are covered rather than
assumed.
shellcheck. Drop a leftover variable and stop assigning the
include-what-you-use lookup, which was only ever an existence check.
* [Tooling] Map Qt 6.5+ split headers to QtGlobal for Qt 6.4 compatibility
IWYU emitted QtTypes, QtPreprocessorSupport, QtVersionChecks, QtAssert,
QtMinMax, QtClassHelperMacros, QtEnvironmentVariables and QtTranslation.
Qt 6.5 split those declarations out of qglobal.h into separate headers, so
neither the Qt* wrapper nor the q*.h private name exists on the oldest Qt we
support (6.4.2), and Debian 12 / Ubuntu 24.04 fail with "No such file or
directory". qtypes.h is worse still: it only appeared in Qt 6.9.
QtGlobal is the one spelling that works across the whole supported range. It
has been public since Qt 5, defines these declarations itself up to Qt 6.4, and
includes the split headers from Qt 6.5 on, so redirect all eight private
headers to it and collapse the affected includes in the tree.
Curated overrides now take precedence over the name-mirroring rule, which
cannot know about Qt version floors because the mapping is generated from
whatever Qt is installed. That rule was mapping qtversionchecks.h to
<QtVersionChecks> even with an override present, because the override was only
consulted as a fallback. A curated key that matches nothing is now a hard
error rather than a silent fallback, and the redirected headers are no longer
advertised as the home of a symbol.
Verified every Qt include in the tree resolves against the real
qt6-base-dev 6.4.2 package: 15 distinct includes, 0 missing.
* [Tooling] Map QOverload to QtGlobal and drop the QMetaMethodArgument include
Two more headers IWYU emitted do not exist on Qt 6.4.2:
QOverload was split out of qglobal.h in Qt 6.5, so on 6.4.2 it is declared in
qglobal.h directly and the standalone header is a hard error. QtGlobal covers
both, so map qoverload.h to it like the other 6.5+ split headers.
QMetaMethodArgument is never referenced anywhere in the tree. It is a bare
forwarder for qobjectdefs.h that our generator advertised as a class symbol,
which is how IWYU came to add the include at all. The symbol mappings are
generated from header names, so they cannot tell a forwarder that happens to be
capitalised from a real class; removing the unused include is the fix, and the
generic case stays a known limitation of the generator.
Extending the audit to every Q* header (an earlier pass only matched headers
starting with "Qt" or lowercase q*.h, so it missed all of them) against the real
qt6-base-dev, qt6-multimedia-dev, qt6-declarative-dev, qt6-svg-dev and
qt6-websockets-dev 6.4.2 packages: 341 distinct Qt includes, 0 missing.
* [Game] Give moc the complete CardItem type in player_actions.h
player_actions.h forward declares CardItem but passes QList<CardItem *> by
value in actPlay/actPlayFacedown/actHide. moc instantiates the metatype for
those parameters, and on Qt 6.4 that expands to sizeof(CardItem), so Ubuntu
24.04 fails with "invalid application of 'sizeof' to incomplete type
'CardItem'". Newer Qt tolerates the incomplete type, which is why only the
6.4.2 jobs failed.
Include the defining header with an IWYU pragma keep, matching how the other
MOC-required includes in this area are handled.
* [Game] Give moc the complete ServerInfo_Card type
player_logic.h, game_scene.h, view_zone.h and view_zone_widget.h forward
declare ServerInfo_Card but pass QList<const ServerInfo_Card *> through signal
and slot signatures. moc instantiates the metatype for those parameters, which
Qt 6.4 expands to sizeof(ServerInfo_Card), so the connect in game_scene.cpp
fails on Debian 12 and Ubuntu 24.04 with "invalid application of 'sizeof' to
incomplete type 'const ServerInfo_Card'". Newer Qt tolerates it, so only the
6.4.2 jobs failed.
Include the generated protobuf header with an IWYU pragma keep, following the
pattern already used for ServerInfo_Player and ServerInfo_User in
game_event_handler.h.
* [Client] Complete the types Qt 6.4 needs for connect and moc
Qt 6.4 expands QMetaType::fromType on the normalised argument list of a
PMF connect and on moc-generated metatypes, which requires sizeof on every
signal and slot parameter. Newer Qt tolerates forward declarations there,
so only the Debian 12 and Ubuntu 24.04 jobs failed, with
"invalid application of 'sizeof' to incomplete type" for QMouseEvent,
QPrinter and GameReplay.
Replace the forward declarations with the real includes:
- QMouseEvent in the nine widget headers that pass it through signals
- QPrinter in abstract_tab_deck_editor.cpp, for the actPrintDeck lambda
- game_replay.pb.h in tab_replays.h. GameReplay is a protobuf message, so
the project's game/replay.h only forward declares it and cannot supply
the complete type.
Found by recompiling all 1918 project TUs against the Debian Qt 6.4.2
headers, which reproduces those two CI jobs locally in one pass.
* [Client] Complete Release and QMenu for Qt 6.4 moc and connect
Continuing the Qt 6.4 complete-type sweep:
- window_main.cpp connects ClientUpdateChecker::finishedCheck to
MainWindow::checkClientUpdatesFinished, whose Release * parameter made
moc 6.4 instantiate the metatype. GameReplay turned out to be a protobuf
message, so Release likewise needed release_channel.h in the three
headers declaring those signals: window_main.h, dlg_update.h and
client_update_checker.h.
- moc 6.4 also needs sizeof(QMenu) for the QList<QMenu *> carried by
TabSupervisor::setMenu and MainWindow::updateTabMenu.
Verified by regenerating moc output with the Debian moc 6.4.2 for all 434
Q_OBJECT/Q_GADGET classes and compiling it, plus recompiling all 1612
source TUs, against the Qt 6.4.2 headers: no remaining failures.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Client] Exit deterministically when launching the update installer
* [Client] Only quit when the main window close is accepted
Wait for MainWindow::close() to be accepted before quitting after the
update installer is launched. When the close is vetoed (a running card DB
update, open games, or an unsaved deck), keep running and tell the user
the installer is already waiting, instead of exiting over their answer.
Also fix the comment so it does not claim settings are saved on the vetoed
path.
* [Client] Only quit on update when the shutdown actually ran
MainWindow::closeEvent has a static re-entrancy guard that returns early on a
second close event, leaving it in its default accepted state. DlgUpdate reached
from a nested event loop while a shutdown prompt was up could then get close()
== true with no shutdown work done (no settings flush, no tab shutdown) and tear
down the process behind an unanswered prompt.
Add MainWindow::closeForUpdate(), which reports false when a close is already in
progress or was vetoed, and gate the update-exit on it.
* [Client] Use QCoreApplication::exit() to leave on update
QCoreApplication::quit() only asks the application to quit and can be
interrupted if a top-level window refuses its close event. On the update path
the process must actually leave so its Qt DLLs are unlocked before the installer
starts replacing files - apply the exit(0) variant both on the accepted-close
path and the fallback where no MainWindow was ever closed.
* [Client] Warn that the update installer force-closes within a minute
Telling the user Cockatrice just 'stays open for now' is misleading: the
installer launched by #7308 waits only about 60 s for a graceful close before it
force-terminates the process, which would lose unsaved work. State the deadline
and tell the user to save and close before then.
* [Client] Warn that a vetoed update is cancelled, not forced
The warning on the veto path promised the opposite of what the installer
does: WaitForAppToClose in #7308 never force-closes cockatrice.exe
($AllowForceClose is 0), it aborts the update after 60 s so no unsaved data
is lost. A user who is told Cockatrice will be terminated in a minute hurries
to close it, only to find the update already given up.
State the real outcome instead: the installer waits about a minute for a
close, and the update is cancelled if that does not happen.
* [Client] Warn about a waiting installer without blocking it
CloseMatchingApps in #7308 sends the WM_CLOSE once and the wait loop only
polls IsAppRunning afterwards, but QMessageBox::warning is application modal
and QGuiApplicationPrivate::processCloseEvent drops spontaneous close events
for windows blocked by a modal widget. The veto path therefore swallowed the
installer's one and only request, so even a user who resolved the blocker and
closed the app still ended in the 60 s timeout.
Move the warning into warnInstallerIsWaiting() and show it modeless, so the
main window stays able to answer the installer while the message is up.
* [Client] Close the parent on the no-MainWindow update fallback
The fallback branch exits the process without closing anything, so it skips
the settings flush and tab shutdown this change exists to get in front of the
installer - the opposite of the fix if a call site ever stops passing a
MainWindow.
Close the parent widget first, like the code before this change did, and only
then leave unconditionally: the parent is the one that knows how to shut down
gracefully, and the deterministic exit is what the installer needs.
* Add override.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
On a clean install, checkUnknownSets() fired before the onboarding wizard,
so the legacy 'all the sets have been enabled' welcome and the Manage Sets
dialog appeared first - with no card data there are no sets to manage yet.
Defer the set check until after the wizard closes, suppress its dialogs
while onboarding runs, and enable newly downloaded sets silently instead.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [DeckShare] Open shared decks via links with a gated preview flow
- Serialized url-chain dispatcher in IntentUrlParser; queue-drained
urlChainFinished(bool) drives the startup auto-connect fallback
- Open-shared-deck intent with sequential download state machine,
15s per-item timeout, partial-success offer, livable Cancel via
ApplicationModal dlg_login_prompt interactive fallback
- Preview dialog: download progress label, share vocab sweep,
palette-highlight selection frame, Space/Enter keyboard toggle,
NoFocus checkbox, double-click tile opens immediately
- Confirm-before-server-migration with one-shot restore to the
previous server on failed/cancelled chains (statusChanged settle
deferral), hostname-only identity comparisons
- Skip credential link when already connected; arrow-key navigation
in FlowWidget; card glows use palette highlight
- Address code-review M1-M4 and UI/UX QA blockers 1-2
* [DeckShare] End the open-shared-deck files with a trailing newline
* [DeckShare] Forward a dependency's cancellation as the owner's own
* [DeckShare] Let intent chains opt into the link sign-in dialog
* [DeckShare] Track link-intent chains per-run so each can restore its own session
* [Settings] Match a server on the exact host and port when adding it
* [DeckShare] Confirm the share link's target server before opening a deck
* [DeckShare] Reformat the link sign-in intent constructor
* [DeckShare] Time the share-list round trip and backstop silently-destroyed intent chains
* [Client] Drain a single-instance payload before its handlers read the socket again
* [Client] Treat a busy single-instance primary as alive instead of stealing its socket
* [DeckShare] Keep arrow-key navigation between flow items inside a scroll area
* [Client] Skip the startup connection when a macOS URL launch owns the connection
* [Client] Redact share secrets from activation URL logs
* [Client] Make the link-connection gates port-aware and keyboard-safe
Second-pass review notes for the shared-deck link flow (Cockatrice#7244):
- FlowWidget arrow-key navigation is opt-in via addNavigableWidget, so
combo/spin controls on the analytics flows keep their own arrow keys
- isConnectedTo and the open-deck/join-game preconditions compare the
configured server port alongside the host, so a same-host/different-port
link cannot resolve its share token or game id on the wrong instance
- the link sign-in dialog reuses an existing server entry's saved name
instead of renaming it to the raw hostname
- skipStartupAutoConnect is cleared once the launch chain connects, so a
later mid-session declined link cannot fire the startup fallback
- the plain-launch path of SingleInstanceManager no longer blocks on the
primary's ACK
- link- and server-supplied text is html-escaped in the confirm prompts and
shared-deck preview so markup cannot spoof the shown messages
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Client] Show localized card names, texts and pictures
Localization wiring now runs end to end: the oracle importer collects
foreignData for the configured language and the client renders it.
- [Oracle] Import localized names and rules texts for the selected cardLang
- single-face cards store their foreignData name and full text
- multi-face (split/adventure/aftermath/prepare) cards collect the joined
name once and join each face's translated text with the same separator
as the English merge; an incomplete translation falls back to English;
the joined text follows the same highest-priority-set policy as the
single-face path and is only collected when localization is enabled
- the wizard switching languages re-imports the card database
- [Client] Display localized card info throughout the client
- card info text/picture widgets and the game board re-render on language
change
- pictures resolve cardLang art through Scryfall's named endpoint using the
localized name, falling back to id-based art when no match exists
- deck editor keeps canonical English names as card identity (EditRole)
while showing localized names (DisplayRole), so decks and wire names
stay stable
- [Card] Add CardLocalization-backed name/text lookup and cards.xml v4
localization elements with a bounded-size translation cache
- [Tests] Cover oracle foreignData import (incl. multi-face joins, priority
and fallback paths), XML v4 localization parsing, deck model localized
display and the language-aware settings default
Existing installations need to re-run Oracle to see translations: localized
data only lands in cards.xml when the Oracle app is started with the
preferred language selected — launch the separate "Oracle" program that
ships with Cockatrice, pick the language in the wizard and let it re-import
the card database.
The client's database cache (cards.xml.cache) is invalidated by the cache
format bump and the source-hash checks, but a cache written before the
re-import can still hold English-only entries (the hash uses file size and
mtime, so a same-size/same-timestamp rewrite may be served as-is); delete
cards.xml.cache and relaunch if no localized names/texts show up after
re-importing.
* [Card] Pass localized card names and texts into CardInfo construction
Address review: instead of constructing the card and then calling
setLocalizedName/setLocalizedText (which emit a cardInfoChanged signal per
language), both constructors, both newInstance overloads and their callers
(cards.xml v4 parser and the binary cache reader) now pass the localized maps
as constructor arguments.
* [Client] Rename LocalizedCard:: helpers namespace to CardLocalization
The namespace now matches its header file name, as the review pointed out;
LocalizedCard reads more like a class or struct. Callers (card info text
widget, board card name rendering) are updated to match.
* [Client] Drop unused info member from the card info text widget
The CardInfoPtr member was only ever initialized to nullptr and never read;
remove it together with its initializer.
* [PictureLoader] Add the localized picture URL explicitly, not implicitly
Address review: silently prepending the Scryfall named-picture URL to the
download list whenever a non-English card language was active was surprising,
consumed quota per card when it failed, and could grab the wrong (canon) art on
name collisions, with no way to turn it off.
The insert is now opt-in and user-controlled: changing the card language adds
the template to the top of the download URLs once (persisted, documented in the
re-import prompt, and editable/removable in the deck editor settings), while the
picture loader no longer injects it at request time.
* [Card] Show card languages in the same native (English) format as the UI
Address review: the card text & images language dropdown listed bare native
names, some in inconsistent lowercase (e.g. "čeština", "español de España"),
which makes the languages easy to mix up for users that do not read the script
(e.g. 日本語 vs 한국어). It now mirrors the UI language dropdown and always pairs
the native name with its English name (e.g. "Deutsch (German)",
"日本語 (Japanese)"), using the same fixed casing.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Replace remaining QPixmap("theme:...") call sites with themePixmap() so icons, replay controls, card backs, and other images resolve to -dark/-light variants under theme schemes. Stem-exact 1:1 migration; behavior unchanged for non-variant themes.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Oracle/Client] Report card database download progress
Card database updates ran invisibly: MTGJSON parsing spun an indeterminate
bar on the UI thread and the set import blocked the window, while the
onboarding wizard spawned `oracle -b` with no progress to show at all.
- Add byte-level scan progress to `RawJson::scanSetRanges` via an optional
callback, throttled to ~100 reports per scan.
- Emit `OracleImporter::dataReadProgress` during the scan and import sets on a
worker thread, driving the wizard's progress bar per set.
- With `-b`, write machine-readable `PROGRESS <stage> <done> <total>` lines to
stdout for the download/scan/import stages; stderr keeps the log output.
- Parse the oracle stdout in `MainWindow` and forward it to the onboarding
wizard, giving the card database step a determinate bar with stage-specific
status text.
- Guard the async workers against the wizard being closed mid-run.
- Add Google Test coverage for scan progress reporting.
* [Oracle/Client] Harden oracle progress workers and quit prompt
Address review feedback on the download-progress change: decompress and read
sets files off the UI thread, cancel the load/import workers before the
wizard can tear down the importer, and show an 'Extracting file...' status
plus a clean 100% tail so the poll never looks stuck. Quitting Cockatrice
while a card database update runs now asks for confirmation.
* Show 100% for 500ms on complete.
* Disable buttons on set import until done.
* Clean up progress bar.
* Drop wrapper around lambda
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [App] Add onboarding wizard
Took 10 minutes
Took 3 minutes
Took 7 minutes
Took 9 minutes
Took 2 minutes
Took 1 minute
Took 7 minutes
* Adjust CI
Took 14 minutes
Took 56 seconds
Took 2 seconds
Took 3 seconds
* Adjust CI again
Took 14 minutes
Took 2 seconds
* Comments and fixes
Took 9 seconds
Took 1 minute
* Rebase.
Took 5 minutes
Took 50 seconds
Took 15 seconds
* Comments.
Took 7 minutes
* CI lol
Took 3 minutes
* CI again lol
Took 4 minutes
* Drop some settings, add some new ones.
Took 19 minutes
* Resize when expanding section
Took 4 minutes
Took 3 minutes
Took 7 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Client] Show live connection latency in the status bar
Add a permanent status-bar label fed by ConnectionController's
pingStatsUpdated: shows the latest round-trip time, hides while
disconnected or without samples, and carries a tooltip with
Last/Median/95th percentile/Maximum over the rolling sample window
(mirrored into the accessible description). The server tab gets the
same stats as its tooltip.
Took 2 minutes
Took 2 minutes
Took 1 minute
Took 48 seconds
Took 25 seconds
Took 4 minutes
* [Client] Graph connection latency history in the status bar
Add LatencyGraphWidget, a size-agnostic bar sparkline over the rolling
sample window: heights scale to the window's own range while colors map
onto an absolute quality ramp, so a steady good ping stays green. Embed
it in the new LatencyStatusWidget together with the textual ping
readout and feed both through ConnectionController's forwarded signals;
the whole area hides while disconnected or without samples.
Took 9 minutes
Took 14 seconds
* [Client] Show latency details when clicking the ping display
Clicking the status bar ping area opens a popup with a larger instance
of the latency graph plus the numeric statistics, selectable and
mirrored into the accessible name. Qt::Popup closes it on any outside
click; contents refresh live while open.
Took 33 seconds
* Fixup from core commit
Took 6 minutes
Took 5 seconds
Took 5 minutes
* Lint.
Took 12 minutes
* Consolidate.
Took 6 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Client] Route cockatrice:// link clicks from chat to the intent chain
A cockatrice:// link clicked in chat is currently handed to the OS (or
does nothing in-process). Clicks now emit a cockatriceLinkActivated signal
that travels ChatView -> Tab -> TabSupervisor -> MainWindow, which feeds
the URL through the same IntentUrlParser the OS activation path uses, so
the join runs entirely in-process. card/user schemes and all other links
behave as before.
* [Client] Route cockatrice:// link clicks from the in-game chat to the intent chain
* [Client] Reuse one IntentUrlParser instance for cockatrice:// links
Took 59 seconds
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Tabs] Add a setting to define startup tab on application launch.
Took 29 minutes
* Naming and sizing
Took 4 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [DeckEditor] Use CommanderSpellbook.com to estimate bracket if format is 'commander'
Took 2 minutes
Took 16 minutes
* Convert json data holder to structs, rename variables, extract widget
- Extract bracket estimation UI from DeckEditorDeckDockWidget into a
new CommanderBracketWidget
- Move CommanderSpellbook integration settings from CardsDisplaySettings
to DeckEditorSettings (matching the settings refactor on master)
- Rename CommanderSpellbook integration variables to drop the redundant
'DeckEditor' prefix
Took 4 minutes
# Commit time for manual adjustment:
# Took 6 minutes
# Commit time for manual adjustment:
# Took 8 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Settings] Shuffle some settings around
Took 21 minutes
Took 1 hour 25 minutes
* [Settings] Camel case everything
* Revert debug schema change
* Add new classes
* Fix card counters writing to global
* Fix CI tests
* Fix Windows CI
* interface() is a protected keyword for MSVC
Took 5 minutes
Took 5 seconds
* [Settings] Keep menu settings on the appearance settings page
Leave the 'Menu settings' group box on the appearance settings page for
now; relocating it to the user interface settings page will be done in a
separate PR.
Took 6 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Card Database] Improve loading times through binary cache
Took 10 minutes
Took 9 minutes
Took 16 seconds
* [Card Database] Remove lib qt include
Took 18 minutes
Took 14 seconds
* Downgrade to 6.3 datastream
Took 5 minutes
* go up to 6.4 datastream
Took 1 minute
* Address comments
* Small bug fixes
Took 20 minutes
Took 10 seconds
* More fixes.
Took 4 minutes
Took 4 seconds
* Even more fixes.
Took 11 minutes
Took 4 seconds
* More fixes.
Took 6 minutes
Took 26 seconds
Took 8 minutes
* Namespace instead of class
Took 6 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Settings] Split cache_settings into multiple files
Took 9 minutes
Took 4 minutes
* [Settings] Fwd declare settings classes in cache_settings
Took 15 minutes
* Fix oracle includes.
Took 8 minutes
* Address comments, fix windows CI
Took 8 minutes
* fix copy constructor visibility
Took 3 minutes
* lint
Took 2 minutes
* Fix native format tests.
Took 5 minutes
* Remove test header guard
Took 4 seconds
* Remove tests invalid in CI environ
Took 24 seconds
* Adjust to rebase.
Took 11 minutes
* Change settings file name.
Took 8 minutes
---------
Co-authored-by: Lukas Brübach <lukas.bruebach@bdosecurity.de>
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* style: Add braces to all control flow statements
Standardize code style by adding explicit braces to all single-statement
control flow blocks (if, else, for, while) across the entire codebase.
Also documents the InsertBraces clang-format option (requires v15+) for
future automated enforcement.
* InsertBraces-check-enabled
* Pull client networking out of window_main and into remote_connection_controller
Took 2 minutes
* Things.
Took 13 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Reload card db and notify enabled sets change on "Manage Sets" dialog save
Took 1 hour 18 minutes
Took 6 seconds
* Extract to method, also notify on "Reload db" and "new sets found"
Took 3 minutes
Took 4 seconds
* Add an "always enable new sets" fuse to "new sets found" dialog
Took 11 minutes
* Always debounce modelDirty() with dirty() timer.
Took 29 minutes
Took 3 minutes
* Performance improvements for settings by not constructing a new settings object on every single set() call (this forced a sync to/from fs but it seems fine to just rely on Qts own periodic sync?)
Took 23 minutes
Took 3 seconds
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Add local game options dialog. Introduces LocalGameOptions struct and DlgLocalGameOptions dialog to replace the previous QInputDialog for starting local games. Encapsulates game configuration with a simple interface that prevents parameter explosion as options are added. The dialog provides UI with settings persistence via SettingsCache
* integrate local game options into main window. Replaces QInputDialog with DlgLocalGameOptions in actSinglePlayer(). The startLocalGame() function now accepts LocalGameOptions, enabling configuration of starting life total and spectator visibility in addition to player count. Also adds user documentation for the local game options flow.
* Removed superfluous documentation file
* removed spectator option and moved structure definition
* Now remember settings separately and & shortcuts removed
* re-run checks
* [Cleanup] Unused #includes
Took 44 minutes
* [Cleanup] More unused #includes
Took 55 minutes
* [Cleanup] Include QSet
Took 4 minutes
* [Cleanup] Include QDebug in deck_list.cpp
Took 3 minutes
* [Cleanup] Include protocol stuff in servatrice_database_interface.h
Took 3 minutes
* [Cleanup] Include QDialogButtonBox
Took 8 minutes
* [Cleanup] Include QUrl
Took 8 minutes
* [Cleanup] Include QTextOption in header.
Took 3 minutes
* [Cleanup] Include QMap in user_list_manager.h
Took 8 minutes
* [Cleanup] Adjust qjson
Took 8 minutes
* [Cleanup] include button box.
Took 3 minutes
* [Cleanup] Redo fwd declarations.
* [Cleanup] Redo last removed fwd declarations.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Have CardDatabase::getPreferredPrintingInfo respect card provider ID overrides (pinned printings)
Took 13 minutes
Took 37 seconds
Took 10 seconds
Took 10 seconds
# Commit time for manual adjustment:
# Took 30 seconds
Took 15 seconds
Took 8 minutes
Took 21 seconds
* Move settings cache and settings card preference provider out of libcockatrice_settings and into cockatrice
Took 52 minutes
Took 9 minutes
Took 1 minute
* Temp cache.
Took 16 minutes
* Dependency Injection for SettingsCache
* Turn SettingsCache into a QSharedPointer.
* Implement interfaces for settings that need it
Took 2 hours 38 minutes
* Adjust oracle.
Took 5 minutes
* Move abstract/noop interfaces to libcockatrice_interfaces so they can be linked against independently.
Took 52 minutes
* Clean up some links.
Took 3 minutes
* Cleanup two includes.
Took 3 minutes
* More fixes.
Took 7 minutes
* More includes that slipped past.
Took 3 minutes
* Stop mocking and start injecting for tests.
Took 15 minutes
* I don't know why remote_client was including main.
Took 4 minutes
* Include.
Took 3 minutes
* Lint.
Took 2 minutes
* Don't use Qt pointers.
Took 1 hour 7 minutes
* Make parser use CardSettingsInterface
Took 13 minutes
* Also adjust constructor lol.
Took 8 minutes
* Lint.
Took 32 minutes
* Revert "Lint."
This reverts commit ecb596c39e.
Took 3 minutes
* Test.
Took 3 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Move logger and key signals from libcockatrice_utility to Cockatrice.
Took 9 minutes
* Only link Qt::Core instead of COCKATRICE_QT_MODULES to libraries, if possible.
Took 2 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
