* [Installer] Abort instead of installing over leftover runtime files
The silent upgrade could leave a mix of old and new Qt DLLs next to the new
executables, which is what makes the next start fail with "The procedure entry
point X could not be located in the dynamic link library ...Qt6QuickWidgets.dll"
or "The code execution cannot proceed because Qt6Multimedia.dll was not found".
The check that was supposed to catch this probed only Qt6Core.dll and
Qt6Network.dll, so it was blind to the two files the reports name. It also only
warned and then installed anyway, so a caught problem was still compounded.
- Scan every file the purge targets with FindFirst, which takes the same
wildcards the Delete/RMDir calls use, instead of two hardcoded names
- Widen IsExistingCockatriceInstall from Qt6Core.dll to Qt6*.dll so a directory
left holding only some Qt modules is still recognised as an install
- Gate the scan on that, so a first-time install into a directory that happens to
hold unrelated Qt5 DLLs is not turned into an abort
- Abort with a non-zero exit code instead of warning, so the new payload is
never written next to files of the previous version
- Skip the message box on an unattended /S install, which would block on it
forever, matching the two existing abort sites
* [Installer] Cancel a silent upgrade when the running-instance guard fails
The running instance guard is what stands between a locked install directory
and the mixed Qt DLL set that breaks the next start, but it failed open in two
places and let the install carry on anyway:
- powershell.exe could not be started: the check warned and returned
- the process lookup answered "could not determine": WaitForAppToClose returned
on $R0 != 1, so "unknown" was treated exactly like "not running"
On a silent upgrade there is nobody at the keyboard to close the applications in
response to that warning, which is precisely the state in which the launcher was
still holding its Qt DLLs mapped.
- Treat "could not determine" as its own state rather than folding it into "not
running", in all three places WaitForAppToClose inspects the result
- Cancel a silent upgrade in both cases; keep an interactive install on the
existing warn-and-continue path, since refusing there would leave an installer
that can never complete and the stale-runtime check still applies
- Route every abort through one AbortInstall so the dialog-vs-silent decision
lives in a single place, and stop the two pre-existing warning dialogs that a
/S install without /R would have blocked on forever
* [Installer] Wait on the process that launched the update installer
The in-app updater starts the installer and only then quits itself, so the
installer has to decide whether the launching process is still alive while it is
running. It did that by polling powershell.exe for an image name under the
install directory, which is a proxy for the real question - is the process that
started me still holding its Qt DLLs mapped - and a proxy that can answer "not
running" or "could not determine" while the process is very much alive. Either
answer let the install carry on into the mixed Qt DLL set.
Take /PID= from the command line and wait on that process handle directly:
- OpenProcess with PROCESS_SYNCHRONIZE only, which is all that is needed to wait
and the least likely to be refused for an unrelated reason
- WaitForSingleObject for the same 60 s the name based check allows, so a client
slow to flush its card database is not squeezed
- Treat an unopenable handle as "already exited", which is what it means for a
dead process
- Cancel the upgrade if the launcher has not exited, rather than replacing files
it is still using
Run it before EnsureAppsNotRunning, not after: it needs no powershell.exe, so it
is the one check that still works on a machine where the process lookup cannot
run, and it is what lets that case keep upgrading instead of being cancelled by
what was only ever a proxy for it. Keep an older client, which passes no /PID=,
on the existing path.
An older installer ignores /PID=, and /D= stays the last parameter either way.
* [Client] Pass our process id to the update installer
The updater starts the installer and only then quits itself, so the installer
begins replacing files while this process still has every Qt runtime DLL mapped,
and a mapped DLL cannot be deleted. It has to work out that it must wait, and
until now all it had was its own image name to go on.
Pass /PID= so it can wait on this process directly instead of guessing, and
cancel the update rather than replace files this process is still using. /D=
stays the last parameter, which NSIS requires.
* [CI] Fail the build when the installer is missing a Qt runtime DLL
The Windows payload is assembled by globbing every *.dll out of the build output
directories, so nothing but luck decides whether a module the client links
statically - Qt6Multimedia.dll, Qt6QuickWidgets.dll - reaches the installer at
all. A module that is left out is invisible until a user installs an update and
the client then refuses to start, with "The code execution cannot proceed because
Qt6Multimedia.dll was not found" or a missing procedure entry point in a
Qt6QuickWidgets.dll carried over from the previous version.
Derive the required list from SERVATRICE_QT_MODULES, COCKATRICE_QT_MODULES and
ORACLE_QT_MODULES, the same module lists the targets are actually built against,
so it cannot drift from what the binaries need, and write it next to the CMake
cache as required-qt-runtime.txt. Add the platform plugin, without which the
client cannot start at all.
Assert it in the existing 7-Zip pass that already rejects build-tree artifacts,
comparing exact relative paths so a same-named file in the wrong directory does
not satisfy a requirement, and normalizing the archive's own separators so it
does not matter which one NSIS chose. Missing manifest, missing entry or missing
7-Zip-independent failures all stop the build rather than warn, which is the
whole point: the previous check already failed hard for artifacts, and a warning
here is what let a broken package ship.
* [Client] Point the Windows qt.conf translations path at the real one
The Windows qt.conf carried Translations = Resources/translations, copied from
the macOS bundle block, but the Windows install has no Resources directory: the
.qm files are installed to COCKATRICE_WIN32_QM_INSTALL_DIR, which is
translations, and main.cpp looks for them at applicationDirPath() +
"/translations". Leave the macOS value alone, which is correct for it.
* [Installer] Close the /? help string so the installer compiles again
The last line of the continued MessageBox string ended in $\n\" instead of $\n".
NSIS reads \" as an escaped quote, so the string never terminated and makensis
rejected the script, which took the CPack packaging step down with it. The
Windows build failed on "Problem running NSIS command" before ever reaching the
new required-runtime check.
* [Installer] Give FindFirst the two arguments it takes
FindFirst takes the pattern and the output variable and leaves the search
handle in $0. There is no handle argument, and FindNext taking only a variable
is the giveaway: the handle has to live somewhere implicit, and it is $0.
The call passed three arguments, so makensis rejected the script and the CPack
packaging step failed with "Problem running NSIS command" before ever reaching
the required-runtime check.
This was not only a compile error. The handle variable was never populated, so
the stale-runtime check that commit 844a1a9b added could never see a match: it
probed $StaleFindHandle, which stayed empty, and the widened wildcard scan over
the purge set was a no-op. Pass the pattern, test $0, and close $0. No FindNext
is needed, because $R0 is a yes/no flag rather than a list.
Drops the now unused StaleFindHandle Var.
* [CI] Dump the NSIS compile log when packaging fails
CPack reports a failed makensis run as "Problem running NSIS command" plus a
path to NSISOutput.log, and that log exists only on the runner, so the actual
compile error never reaches the workflow output. An installer script that does
not compile is therefore undiagnosable from CI alone, which is exactly how a
three-argument FindFirst cost two build cycles here.
* [CI] Run the NSIS log dump under bash
The dump step used the default pwsh shell, where `find` resolves to Windows'
text-search find.exe rather than a file finder, so it died with "FIND:
Parameter format not correct" instead of printing anything. Pin shell: bash.
* [Installer] Test the error flag with LogicLib's ${Errors} condition
makensis rejected the script with "macro _If requires 4 parameter(s), passed
2" at the ClearErrors/OpenProcess pair. A ${If} condition cannot be a bare
$Var: LogicLib needs either a comparison or one of its flag macros, and a lone
$Errors splits into too few arguments for _If. ${Errors} is the documented flag
condition and is the same mechanism as the ${Silent} test already used here.
The dump step earned its keep - this took one run to locate rather than another
round of guessing.
* [Installer] Give FindFirst its handle back and stop blocking silent aborts
makensis: "FindFirst expects 3 parameters, got 2. Usage: FindFirst
$(user_var: handle output) $(user_var: filename output) filespec".
The previous commit was wrong about this. FindFirst does take the handle
explicitly, and FindNext finds it in $0 as a side effect of the FindFirst that
set it, which is why FindNext takes only a variable. The three-argument form the
stale-runtime check was written with was correct all along, and the two-argument
form broke it. Restored, along with Var StaleFindHandle.
That same commit inverted the interactive check in both abort paths.
`${If} $ReinstallMode = 1` with `${OrIfNot} ${Silent}` shows the message box
exactly when the install is the silent /R upgrade - the one case the comment
says must never block, since nothing will dismiss it and the installer hangs
until it is killed. Replaced with `${IfNot} ${Silent}`, so the box appears only
for an interactive install and a silent abort goes straight to SetErrorLevel.
Audited every construct added by this branch against master, which compiles:
all 9 LogicLib condition shapes have a master precedent, FindFirst is the only
FindFirst and is back to 3 arguments, Function/Section and block depth balance,
and the 12 lines with an odd number of quotes are the same pre-existing string
continuations master has.
* [CI] Strip the CR 7-Zip leaves on its paths before comparing them
The installer check reported all 14 required files missing, including
Qt6Core-era basics an 82 MB package obviously contains, so the payload was fine
and the comparison was broken. 7-Zip writes CRLF on Windows, sed 's/^Path = //p'
kept the \r on every line, and grep -qxF matches whole lines - so every entry
carried a trailing \r and nothing matched. The build-tree artifact check next to
it uses an unanchored grep -E and was unaffected, which is what made the two
checks disagree.
Reproduced locally against a 7z archive with CRLF injected: the old pipeline
matches nothing, the new one finds the present files and reports only the
genuinely absent one.
Also match case-insensitively. That is how the installed tree behaves - the
uninstaller clears both $INSTDIR\plugins and $INSTDIR\Plugins - so a
Plugins vs plugins difference in the archive is not a missing file.
* [CI] Print both sides of the installer path comparison, and strip its prefixes
The check still reported all 14 files missing after the CR fix, so the CR was
not the cause and the real difference between 7-Zip's output and the manifest
is still unknown. Inferring it again is what produced two wrong fixes in a row,
so on failure the check now prints the required list and the first 40 paths
7-Zip lists. A bare "missing" line cannot distinguish a missing file from a
misread listing, and twice it was the latter.
Also strip $INSTDIR/, $OUTDIR/, $PLUGINSDIR/ and ./ prefixes from the listed
paths. Written as separate -e expressions rather than one alternation: with |
as the sed delimiter an escaped \| is a literal pipe, so the alternation
version silently matched nothing at all.
Verified against a 7z archive fed through seven path shapes - plain, Windows
backslashes with CRLF, each prefix, lowercase plugins, and all of them combined
- each reporting only the file genuinely absent from the archive.
* [CI] Strip CR from the manifest side of the installer path check
The dump added last run settled it: 7-Zip listed 209 paths including Qt6Gui.dll,
Qt6Multimedia.dll and Plugins/platforms/qwindows.dll verbatim, as plain relative
paths with no prefix - so the archive side was already clean and the previous
fix was right to strip CR there but not sufficient.
The trailing CR was on the other side. CMake writes required-qt-runtime.txt
with the platform line ending, so on Windows $entry arrived as
"Qt6Gui.dll\r", which cannot whole-line match a clean "Qt6Gui.dll". Every
entry then read as missing while the listing held it, which is precisely what
the two sides of the dump showed.
Reproduced locally with a CRLF manifest against a 7z archive: without the strip
every entry is reported missing, with it only the genuinely absent file is.
Checked across plain paths, Windows backslashes with CRLF, $INSTDIR, $OUTDIR,
$PLUGINSDIR, ./ and / prefixes.
The literal $INSTDIR-style prefixes are written as [$] bracket expressions so
shellcheck does not read them as unexpanded variables; that clears the SC2016
that failed the format job, without a disable directive.
* [CI] Reword the bracket-expression comment so the linter stops parsing it
A comment whose first word is shellcheck is read as a directive, so
"# shellcheck does not read these as unexpanded shell variables" was parsed as
a directive named "does" and failed with SC1073 and SC1072 - which cascaded into
the SC1009 on the else clause above it. The SC2016 it was meant to document is
already gone now that the prefixes are written as [$] bracket expressions, so
the note only had to stop looking like a directive.
* [CI] Indent the diagnostic path lists without sed, and undo comment drift
SC2001 asks for parameter expansion instead of sed 's/^/ /'. Echoing
${manifest//$'\n'/$'\n '} prepends the two spaces directly and keeps the
diagnostic block readable. Both occurrences are converted; only the one reading
from a here-string was reported, but the piped one has the same shape.
Also restore master's wording of the build-tree artifact comment. An earlier
edit inserted "in " ("not the install)" became "not in the install)"). It has no
functional effect, but it was an unintended change to a line this branch has no
reason to touch, and .ci/compile.sh now differs from master only by additions.
* [CI] Ship the Qt module runtimes the Windows package check requires
The installer check reports Qt6Concurrent.dll and Qt6ShaderTools.dll missing
from the Windows package. Both are genuinely absent, not another comparison
artifact - the manifest now matches 12 of 14 entries and the dual-list
diagnostic shows the other two are not in the archive at all.
Nothing deploys them. fixup_bundle copies only the DLLs it finds in
Cockatrice.exe's import table, and the *.dll glob only sees what was already
copied next to the executable. Qt6::Concurrent is linked but never imported,
because QtConcurrent::run and QFutureWatcher are header-only in Qt 6, so the
linker drops the import; Qt6::ShaderTools is skipped the same way. The package
has shipped without them and the client still starts, but that is luck rather
than intent, and required-qt-runtime.txt asks for both.
Install the runtime of every linked module explicitly so the installer contains
what the check demands. An unused DLL costs a few hundred kilobytes; a missing
one is what stops the client starting after an update, and stays invisible until
then.
Derive both the manifest and the install list from the imported target's TYPE,
so a statically linked Qt module - which ships no runtime at all - is skipped by
each and the two can never disagree. Scope the manifest to the client rather
than the union across server, client and Oracle: only the client is packaged on
Windows, and the other two module lists are subsets of the client's, so this
changes nothing today.
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Build] Enable ccache by default when it is installed
ccache is a near free win for both clean and incremental rebuilds and
has no effect on systems where it is not installed (find_program
guards the whole block). Aligns the CMake default with the documented
behavior; users can still arch with -DUSE_CCACHE=OFF.
* [Build] Disable ccache auto-engage on Windows (MSVC)
* [Build] Report ccache skip on Windows explicitly
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Build] Add precompiled headers for Qt-backed executables
Reparsing QtCore/QtGui/QtWidgets/QtNetwork in ~460 client translation
units is the dominant compilation cost. Precompile the two common layers:
- qtcore_pch.h (Qt Core only; safe even for headless Servatrice)
- qtwidgets_pch.h (adds Gui/Widgets/Network; used by Cockatrice and Oracle)
target_precompile_headers() requires CMake 3.16, now the project minimum.
Estimated 30-50% faster client rebuilds.
* [Build] Format qtwidgets precompiled header
clang-format include regrouping and a missing trailing newline.
* [Build] Add PCH-aware ccache sloppiness config; format cmake/pch headers
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Security] Use a CSPRNG for salts, tokens, and RNG seeding
Password salts and activation tokens were generated with the global SFMT
RNG, which was seeded from a 32-bit timestamp, making registration
salts and activation tokens predictable. The game RNG used the same
timestamp seed across restarts.
Add CryptoUtil backed by OpenSSL RAND_bytes and use it for salt/token
generation and to seed RNG_SFMT with a 64-bit CSPRNG value in both the
client and server. Link libcockatrice_utility against OpenSSL::Crypto.
Took 30 seconds
Took 25 minutes
* Lint.
Took 4 minutes
Took 36 seconds
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
Pass -pipe so GCC/Clang transfer intermediate representation between
compiler stages over pipes instead of temporary files, reducing build I/O.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
3.16 is already required by Qt6 (and enforced at find_package time).
This unlocks native target_precompile_headers(), better AUTOMOC/AUTORCC
handling, and qt6_finalize_project() without a version guard.
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [CI] Remove Qt5
Took 10 minutes
Took 9 minutes
* Revert CI failure and fix up comments
Took 4 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* fix(cmake): guard filter_string_test behind WITH_ORACLE or WITH_CLIENT. filter_string_test links against libcockatrice_filters, which is only built when WITH_ORACLE or WITH_CLIENT is enabled. Without this guard, test-only builds fail at configure time because the target doesn't exist. The guard condition mirrors the one in the root CMakeLists.txt that controls whether libcockatrice_filters is built.
* fix(cmake): centralize TEST_QT_MODULES in FindQtRuntime.cmake Each test CMakeLists.txt was independently defining TEST_QT_MODULES with its own subset of Qt modules. This duplicated knowledge that already lives in FindQtRuntime.cmake (which handles module discovery for all other targets: SERVATRICE, COCKATRICE, ORACLE). Consolidate into a single definition using the union of all test requirements (Concurrent Network Svg Widgets), matching the existing pattern for application-target modules. This ensures test-only builds (-DTEST=ON without application targets) discover all necessary Qt components.
* fix(cmake): guard libcockatrice_network behind application targets. libcockatrice_network is only needed by the client, server, and oracle targets. Other application-specific libraries (settings, models, filters) already have similar guards. This was an oversight that caused test-only builds to fail when network dependencies weren't available.
* attempts to fix the problem
* add test to show the problem
* fix workflow
* move logger to cockatrice
* more attempts
* undo stuff
* mark different libraries as gui
* fix SC2145
* rename servatrice only build
* Split filters into libraries where applicable.
Took 23 minutes
Took 2 minutes
* Include filter string.
Took 5 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Have CardDatabase::getPreferredPrintingInfo respect card provider ID overrides (pinned printings)
Took 13 minutes
Took 37 seconds
Took 10 seconds
Took 10 seconds
# Commit time for manual adjustment:
# Took 30 seconds
Took 15 seconds
Took 8 minutes
Took 21 seconds
* Move settings cache and settings card preference provider out of libcockatrice_settings and into cockatrice
Took 52 minutes
Took 9 minutes
Took 1 minute
* Temp cache.
Took 16 minutes
* Dependency Injection for SettingsCache
* Turn SettingsCache into a QSharedPointer.
* Implement interfaces for settings that need it
Took 2 hours 38 minutes
* Adjust oracle.
Took 5 minutes
* Move abstract/noop interfaces to libcockatrice_interfaces so they can be linked against independently.
Took 52 minutes
* Clean up some links.
Took 3 minutes
* Cleanup two includes.
Took 3 minutes
* More fixes.
Took 7 minutes
* More includes that slipped past.
Took 3 minutes
* Stop mocking and start injecting for tests.
Took 15 minutes
* I don't know why remote_client was including main.
Took 4 minutes
* Include.
Took 3 minutes
* Lint.
Took 2 minutes
* Don't use Qt pointers.
Took 1 hour 7 minutes
* Make parser use CardSettingsInterface
Took 13 minutes
* Also adjust constructor lol.
Took 8 minutes
* Lint.
Took 32 minutes
* Revert "Lint."
This reverts commit ecb596c39e.
Took 3 minutes
* Test.
Took 3 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Move models to own library.
Took 35 minutes
Took 22 minutes
* Adjust CMakeLists
Took 20 seconds
* Reformat CMakeLists.
Took 2 minutes
* Revert "Reformat CMakeLists."
This reverts commit db5982ad1c.
Took 55 seconds
* Lint an include
Took 17 minutes
Took 9 seconds
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* build: use vcpkg for most dependencies on macos
* factor out common params
* refactor: factor out common parameters in macOS matrix
* use env vars instead of matrix
* add comment about jianmingyong/ccache-action
* Remove unused 'qt_tools' param
* Use system python
* Let ccache caches be handled by ccache-action
* Add comment about why we use install-qt-action
* set unique ccache key
* nit
* fix cache prefix
* pass gh-token
* Revert "pass gh-token"
This reverts commit cadfa253c6.
* Reapply "pass gh-token"
This reverts commit bd15e96e18.
* do not cache qt on macos
* Support C++20 Standard
* Update peglib.h
* Fix lambdas
* Move from for loops to std::any/all_of
* Support fixed CFG
* Fix Rarity Search to be more accurate
* Set some CPack variables
WIP for DMG background image
* Use a .tif for background
* Add Background image and DS_Store script
Script is from https://www.kitware.com//creating-mac-os-x-packages-with-cmake/ with cmake.app changed to cockatrice.app
* Add position for all icons
* Adjust background size and icon position
This draws dbconverter off the screen as a hack to hide it, so hopefully it doesn't break.
* Add files via upload
* Change Icon Position
Icon position is probably relative to the window edge, not the edge of the screen so the numbers should be lower.
* Adjust Icon Position and Window Boundaries
Applescript seems to use the center of the icon rather than the left corner so the coordinates need to be adjusted by 64 px.
The finder window counts the 22 px of the title bar in the window size so 22 must be added to the fourth coord of position to fit the entire image.
* Fix spelling of Servatrice
* Satifsfy Code Style
* Use vector format (eps)
* Delete background.tif
* Use vector format (eps)
* Use the right file extention in the script
* Point to svg
* Use svg
* Add svg for background image
* Delete background.eps
* Use plain SVG, adjust text
* Move applescript to /cmake
* Move background to /cmake
* Point CPack to /cmake
background and applescript now reside there
* Revert to .tif
* Use compressed .tif
* Use more specific file name
* Script expects .background:background.tif
* merge clangify and cmakify into format.sh
update desktop lint workflow to 22.04
print cmake-format version as well
um, rename things?
add extra examples to format.sh --help
add option to not run clang-format
fix version display in .ci/lint_cpp.sh
fix relative paths in format.sh
fix formatting dirs
* run ./format.sh --cmake --branch ""
* revert formatting of cmake comments
Add lock around deleting arrows for commanding cards
Add support for Qt6 w/ Backwards Qt5
Handle Qt5/6 cross compilation better
Last cleanups
caps matter
Fix serv
Prevent crash on 6.3.0 Linux & bump to 5.8 min
Prevent out of bounds indexing
Delete shutdown timer if it exists
Fixup ticket comments, remove unneeded guards
Try to add support for missing OSes
Update .ci/release_template.md
Update PR based on comments
Update XML name after done and remove Hirsute
Address local game crash
Address comments from PR (again)
Tests don't work on mac, will see if a problem on other OSes
make soundengine more consistent across qt versions
disable tests on distros that are covered by others
Fix Oracle Crash due to bad memory access
Update Oracle to use new Qt6 way of adding translations
Add support for Qt5/Qt6 compiling of Cockatrice
Remove unneeded calls to QtMath/cmath/math.h
Update how we handle bitwise comparisons for enums with Tray Icon
Change header guards to not duplicate function
Leave comment & Fix Path for GHA Qt
Update common/server.h
Update cockatrice/src/window_main.cpp
Rollback change on cmake module path for NSIS
check docker image requirements
add size limit to ccache
put variables in quotes
properly set build type on mac
avoid names used in cmake
fix up cmake module path
cmake 3.10 does not recognize prepend
Support Tests in FindQtRuntime
set ccache size on non debug builds as well
immediately return when removing non existing client
handle incTxBytes with a signal instead
don't set common link libraries in cockatrice/CMakeLists.txt
add comments
set macos qt version to 6
Try upgrading XCode versions to latest they can be supported on
Ensure Qt gets linked
add tmate so i can see what's going on
Qt6 points two directories further down than Qt5 with regard to the top lib path, so we need to account for this
Establish Plugins directory for Qt6
Establish TLS plugins for Qt6 services
Minor change for release channel network manager
Let windows build in parallel cores
Wrong symbols
Qt6 patch up for signal
add missing qt6 package on deb builds
boolean expressions are hard
negative indexes should go to the end
Intentionally fail cache
move size checks to individual zone types
Hardcode libs needed for building on Windows, as the regex was annoying
Update wording
use the --parallel option in all builds
clean up the .ci scripts some more
tweak fedora build
add os parameter to compile.sh
I don't really like this but it seems the easiest way
I'd prefer if these types of quirks would live in the main configuration
file, the yml
fixup yml
readd appended cache key to vcpkg step
fix windows 32 quirk
the json hash is already added to the key as well
remove os parameter and clean up ci files
set name_build.sh to output relative paths
set backwards compatible version of xcode and qt on mac
set QTDIR for mac builds on qt5
has no effect for qt6
export BUILD_DIR to name_build.sh
merge mac build steps
merge homebrew steps, set package suffix
link qt5
remove brew link
set qtdir to qt5 only
compile.sh vars need to be empty not 0
fix sets manager search bar on qt 5.12/15
fix oracle subprocess errors being ignored on qt 5
clean up translation loading
move en@source translation file so it will not get included in packages
NOTE: this needs to be done at transifex as well!
Use generator platform over osname
Short circuit if not Win defined
