* [DeckList] Add custom deck zones to the deck tree
Introduce user-definable zones nested under a board zone (main, side
or maybeboard) so players can organize cards inside a board without
changing board semantics.
- addCustomZone, renameCustomZone, moveCustomZone and removeCustomZone
manage zones. Names are unique across the whole deck and the standard
zone names (main/side/maybeboard/tokens) stay reserved.
- Board zones are created lazily on first use.
- getZoneObjFromName resolves custom names to their nested node so
addCard and XML loading route cards into them. Unknown names keep
creating legacy top-level zones.
- deleteNode keeps empty custom zones alive and only prunes empty
board zones.
- New deck_list_zones test suite locks hash parity with flat decks,
sideboard size accounting, maybeboard exclusion from plain export
and native-format round-trips.
Took 17 minutes
Took 11 minutes
* Extract to function
Took 4 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Client] Detect main-thread event loop stalls
LagMonitor ticks the GUI event loop every 500 ms and records gaps
beyond 2 s as stalls, warning with their duration and keeping a
bounded ring of recent records for diagnostics. Measurement uses a
monotonic QElapsedTimer so wall-clock steps and suspend do not
fabricate stalls. Recorded timestamps stay in wall time for
correlating with user reports.
Took 1 minute
Took 13 minutes
Took 2 minutes
* [Client] Rename LagMonitor constants to SCREAMING_SNAKE_CASE
Took 15 minutes
* [Client] Discard suspend-spanning gaps in LagMonitor
Windows counts sleep time in its monotonic clock, so a suspend would
fabricate one bogus stall per resume. Reset the clock on application
state changes and drop implausibly huge gaps; extract recordGap() for
testability.
Took 3 minutes
* [Client] Unit test LagMonitor stall recording
Drives recordGap() directly to cover the threshold, plausibility cap,
trim, and clear behavior without timing-dependent waits.
Took 36 seconds
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Network] Measure real server round-trip times
Time each command container from send to response with QElapsedTimer,
aggregate samples in a fixed-size ring buffer (last/median/p95/max),
and emit aggregated pingStatsUpdated at most once per second so the
hot path stays free of signal traffic. Stats are cleared on
disconnect. Forward the signal through ConnectionController for UI
consumers. Unit-tested in latency_tracker_test.
Took 37 minutes
Took 4 minutes
# Commit time for manual adjustment:
# Took 8 minutes
* Move params to struct, more informative debug
Took 56 seconds
Took 53 seconds
Took 2 minutes
Took 33 seconds
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Server/Client/Protocol] Reporting users + moderation queue functionality
Took 6 minutes
Took 3 minutes
Took 8 seconds
Took 11 minutes
Took 12 minutes
Took 7 minutes
Took 15 seconds
Took 2 minutes
Took 1 minute
Took 30 seconds
Took 16 seconds
* CI Fix
Took 6 minutes
* CI Fix
Took 6 minutes
* [Protocol] Add moderation investigation commands
Adds the protocol layer for the moderation investigation suite:
- Command_GetUserSessions/GetUserAlts/GetModeratorLastLogins/ResetUserPassword/RemoveUserAvatar (1013-1017)
- Response extensions 1215-1219 with ServerInfo messages for sessions, alts, and staff logins
- last_login on Response_ReportUserInfo and warning_il on Response_WarnList
Took 2 minutes
* [Utility] Add warning categories parser with infraction levels
Parses the server's 'officialwarnings' setting (comma-separated, optional
'|IL' suffix) into WarningCategory structs so the client can display the
infraction level of each warning category. Includes GTest coverage.
* [Server] Add moderation investigation tools
Implements the server side of the moderation suite:
- getUserSessions/getUserAlts/getModeratorLastLogins/removeUserAvatar DB methods
- Handlers for all five new commands with audit records (PASSWORD_RESET,
REMOVE_USER_AVATAR); password resets return a generated temporary password
- cmdGetWarnList now reports per-category infraction levels from the
officialwarnings setting; cmdReportUserInfo reports last_login
- Update servatrice.ini.example with the warning taxonomy
- Password/avatar mutations report RespNameNotFound when the user does not exist
* [Client] Add moderation tab with investigate, password reset, and avatar removal
- New Moderation tab: search a user to show account info, alternate
accounts, login sessions, and staff last logins; actions to reset the
user's password (shows the generated temporary password) and remove the
user's avatar
- 'Investigate user' entry in the user context menu opens the tab pre-loaded
for that user
- Warning dialog shows the infraction level of each warning category
- Tab wired into TabSupervisor with a moderator-gated menu action, shortcut,
and tabs.ini persistence (default closed)
* [Server/Client/Protocol] Address PR #7091 review: security, bug, and perf fixes
Security:
- Promote RESET_USER_PASSWORD to admin-only dispatch (was moderator-accessible)
- Reject password reset on users with equal/higher privilege than caller
- Notify affected user via Event_NotifyUser::CUSTOM when password is reset
- Add server-side category whitelist for reports
- Drop reporter name fallback in comment/details authorization (ID-only)
- Force password change: new DB column + login enforcement + client disconnect
Bugs:
- XSS via QTextEdit::append() → insertPlainText() in report tab and utils
- allNotified initialized to true even with empty recipients list
- Warning combo box: use currentData() instead of baked-in display text
- Report resolution now records who resolved (resolved_by column + audit)
Performance:
- IP-correlation subquery: add 6-month window + LIMIT 200
- getUserSessions: clamp limit to 500
Non-blocking:
- Palette-aware colors in report_utils.cpp (dark/light mode)
- Report list pagination: offset/limit fields + total_count in response
- SessionCommand enum gap comment for reserved values 1201-1203
Schema: 36→37 (force_password_change), 37→38 (resolved_by)
Took 12 minutes
Took 16 seconds
* Fix macOs pedantry
Took 5 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Game] Playmats
Took 19 seconds
Took 1 minute
* [Playmats] Add fixed override and configurable fallbacks to settings.
Took 29 minutes
Took 43 seconds
* Add main to test.
Took 1 minute
Took 29 seconds
* Move settings to own group
Took 11 minutes
* Some attempts to refresh macOS compositor
Took 2 minutes
* Try something else
Took 17 minutes
* Don't manipulate live list
Took 11 minutes
* Change things about resolution, address comments.
Took 45 minutes
Took 12 minutes
* Comments.
Took 14 minutes
Took 8 seconds
* Re-order settings menu location
Took 2 minutes
* Rename PlaymatResolution to Info and add enums
Took 8 minutes
---------
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* [Settings] Split cache_settings into multiple files
Took 9 minutes
Took 4 minutes
* [Settings] Fwd declare settings classes in cache_settings
Took 15 minutes
* Fix oracle includes.
Took 8 minutes
* Address comments, fix windows CI
Took 8 minutes
* fix copy constructor visibility
Took 3 minutes
* lint
Took 2 minutes
* Fix native format tests.
Took 5 minutes
* Remove test header guard
Took 4 seconds
* Remove tests invalid in CI environ
Took 24 seconds
* Adjust to rebase.
Took 11 minutes
* Change settings file name.
Took 8 minutes
---------
Co-authored-by: Lukas Brübach <lukas.bruebach@bdosecurity.de>
Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>
* Unify counter clamp arithmetic into shared addClamped() helper
- Add addClamped() in new header clamped_arithmetic.h; uses a 64-bit
intermediate so the addition cannot overflow int.
- Use it in Server_Card::incrementCounter() (clamps [0, MAX_COUNTERS_ON_CARD])
and Server_Counter::incrementCount() (clamps [INT_MIN, INT_MAX]), removing
the duplicated overflow-safe logic and its keep-in-sync TODO.
- Inline incrementCount() into server_counter.h; server_counter.cpp now holds
only the constructor and getInfo().
- Clarify the card-counter bounds comment in trice_limits.h.
* Rename MAX_COUNTERS_ON_CARD to MAX_COUNTER_VALUE
The constant caps the counter's value, not how many counters can be on the card
* Add direct unit tests for addClamped() helper
* Harden offsetCardCounter() against signed-int overflow
Replace the raw oldValue + offset sum with addClamped(), clamping to [0, MAX_COUNTER_VALUE] without overflow.
* Comment update
* Remove class names from addClamped() docstring
* Refactor server counter API to own overflow protection and filter no-op events
Counter modifications now clamp to int bounds server-side and return change
status, allowing command handlers to skip network broadcasts when values
don't actually change.
* Centralize MAX_COUNTERS_ON_CARD and enforce [0, 999] bounds on server
- Move MAX_COUNTERS_ON_CARD to trice_limits.h
- Server clamps values in setCounter() and incrementCounter()
- Client uses clamped comparison to allow recovery from invalid states
- Add tests for clamping behavior
* move incrementCount() implementation from header to cpp
* Fix#6659: Correct logging for bottom-of-library card moves
Cause:
- This issue happens due to logic of moving the card from the top of the
deck being reused when moving from the bottom of the deck, in a way
that makes it impossible to check if the card came from the bottom.
Resolution:
- Updated the logging logic in the client for card moves.
- Added a gRPC parameter ('is_from_bottom') for card moves.
- Updates the server logic to reverse the order of the card move if the
'is_from_bottom' parameter is true.
- Added a test to show the expected behaviour of the fix.
NOTE: While the changes in this patch seem big, this is due to changing
the loop in the moveCard function to a helper function, in order to make
the bug fix change. The only change to the loop was to pass a
variable attribution to the moveCard function because it was redundant
to be in the loop.
* chore: run format on test
* refactor: new way to check if a move is from the bottom of the deck
* refactor: change isFromBottom check to static function
* update comments
Co-authored-by: ebbit1q <ebbit1q@gmail.com>
---------
Co-authored-by: ebbit1q <ebbit1q@gmail.com>
* fix(cmake): guard filter_string_test behind WITH_ORACLE or WITH_CLIENT. filter_string_test links against libcockatrice_filters, which is only built when WITH_ORACLE or WITH_CLIENT is enabled. Without this guard, test-only builds fail at configure time because the target doesn't exist. The guard condition mirrors the one in the root CMakeLists.txt that controls whether libcockatrice_filters is built.
* fix(cmake): centralize TEST_QT_MODULES in FindQtRuntime.cmake Each test CMakeLists.txt was independently defining TEST_QT_MODULES with its own subset of Qt modules. This duplicated knowledge that already lives in FindQtRuntime.cmake (which handles module discovery for all other targets: SERVATRICE, COCKATRICE, ORACLE). Consolidate into a single definition using the union of all test requirements (Concurrent Network Svg Widgets), matching the existing pattern for application-target modules. This ensures test-only builds (-DTEST=ON without application targets) discover all necessary Qt components.
* fix(cmake): guard libcockatrice_network behind application targets. libcockatrice_network is only needed by the client, server, and oracle targets. Other application-specific libraries (settings, models, filters) already have similar guards. This was an oversight that caused test-only builds to fail when network dependencies weren't available.
Hand and stack zones had near-identical addCardImpl() implementations, differing only in whether resetState() preserves annotations.
Extract the shared pattern into a template function (CardZoneAlgorithms::addCardToList) to eliminate duplication and enable isolated testing without Qt dependencies.
Pile, table, and zone-view logic are intentionally excluded — their post-add behavior (signals, coordinate placement, hidden cards) is materially different.
* add deck hashing tests
* format
* fix header
* fix cmakelists
* fix test
* add 5 second timeout to test
let the optimising begin
* expand tests
* remove debug message
* manually format
* I installed cmake format from the aur
* use decklist library
* format
* merge clangify and cmakify into format.sh
update desktop lint workflow to 22.04
print cmake-format version as well
um, rename things?
add extra examples to format.sh --help
add option to not run clang-format
fix version display in .ci/lint_cpp.sh
fix relative paths in format.sh
fix formatting dirs
* run ./format.sh --cmake --branch ""
* revert formatting of cmake comments
Add lock around deleting arrows for commanding cards
Add support for Qt6 w/ Backwards Qt5
Handle Qt5/6 cross compilation better
Last cleanups
caps matter
Fix serv
Prevent crash on 6.3.0 Linux & bump to 5.8 min
Prevent out of bounds indexing
Delete shutdown timer if it exists
Fixup ticket comments, remove unneeded guards
Try to add support for missing OSes
Update .ci/release_template.md
Update PR based on comments
Update XML name after done and remove Hirsute
Address local game crash
Address comments from PR (again)
Tests don't work on mac, will see if a problem on other OSes
make soundengine more consistent across qt versions
disable tests on distros that are covered by others
Fix Oracle Crash due to bad memory access
Update Oracle to use new Qt6 way of adding translations
Add support for Qt5/Qt6 compiling of Cockatrice
Remove unneeded calls to QtMath/cmath/math.h
Update how we handle bitwise comparisons for enums with Tray Icon
Change header guards to not duplicate function
Leave comment & Fix Path for GHA Qt
Update common/server.h
Update cockatrice/src/window_main.cpp
Rollback change on cmake module path for NSIS
check docker image requirements
add size limit to ccache
put variables in quotes
properly set build type on mac
avoid names used in cmake
fix up cmake module path
cmake 3.10 does not recognize prepend
Support Tests in FindQtRuntime
set ccache size on non debug builds as well
immediately return when removing non existing client
handle incTxBytes with a signal instead
don't set common link libraries in cockatrice/CMakeLists.txt
add comments
set macos qt version to 6
Try upgrading XCode versions to latest they can be supported on
Ensure Qt gets linked
add tmate so i can see what's going on
Qt6 points two directories further down than Qt5 with regard to the top lib path, so we need to account for this
Establish Plugins directory for Qt6
Establish TLS plugins for Qt6 services
Minor change for release channel network manager
Let windows build in parallel cores
Wrong symbols
Qt6 patch up for signal
add missing qt6 package on deb builds
boolean expressions are hard
negative indexes should go to the end
Intentionally fail cache
move size checks to individual zone types
Hardcode libs needed for building on Windows, as the regex was annoying
Update wording
use the --parallel option in all builds
clean up the .ci scripts some more
tweak fedora build
add os parameter to compile.sh
I don't really like this but it seems the easiest way
I'd prefer if these types of quirks would live in the main configuration
file, the yml
fixup yml
readd appended cache key to vcpkg step
fix windows 32 quirk
the json hash is already added to the key as well
remove os parameter and clean up ci files
set name_build.sh to output relative paths
set backwards compatible version of xcode and qt on mac
set QTDIR for mac builds on qt5
has no effect for qt6
export BUILD_DIR to name_build.sh
merge mac build steps
merge homebrew steps, set package suffix
link qt5
remove brew link
set qtdir to qt5 only
compile.sh vars need to be empty not 0
fix sets manager search bar on qt 5.12/15
fix oracle subprocess errors being ignored on qt 5
clean up translation loading
move en@source translation file so it will not get included in packages
NOTE: this needs to be done at transifex as well!
Use generator platform over osname
Short circuit if not Win defined
* Address macOS issue where right-clicking a username in the main chat (or game chat) areas would pop up a seemingly empty user profile. This is because the resize event is overridden and doesn't actually attempt to resize based on the size hint of the dialog. Now that we're explicit with the call, this resize should be forced and have comparable results to popping up user profile from the user list.
* use datetime for calculating account age (#4526)
* use datetime for calculating account age
make translating easier by using tr multiples
automatically account for leap days
Co-authored-by: ebbit1q <ebbit1q@gmail.com>
* add ubuntu 21.10 to ci
remove ubuntu 20.10
* forgot to update dockerfile
* add googletest from repos
* update downloaded gtest
ideally this should just grab the master version
* fix hash
* fix cmake issue
* Add peglib
* - Add expression engine
- Take an expression when setting a counter
* Shift + Click = Middleclick for counters
* minor cleanup for clangify
Signed-off-by: Zach Halpern <ZaHalpern+github@gmail.com>
* Added tip entry
